Anyone here used fasttech.

[terry w]

Enjoy your two towers mate

Fraid it's time for me to hit the sack now, work always seems to get in the way. Don't know if I'll be able to sleep though with this nic buzz. Until tomorrow, vape on

I like it mate good night, don`t be dreaming about steam trains now

One thing i forgot to mention when dripping Ian is vaping style. What i mean by that is...when you take a draw, don`t just pull like you do with an evod etc. Draw directly into your lungs.you need an airy tank to do this, so get that airhole opened up mate, and give it a go.

 

[indoorsindica]

Have a link to the kanthal and wick can't find it >.<

 

[terry w]

Have a link to the kanthal and wick can't find it >.<

hi, are you asking for a link ?

 

[itsrayray]

How does it take for tracking to update when it gets shipped status?

 

[indoorsindica]

Have a link to the kanthal and wick can't find it >.<

hi, are you asking for a link ?

Nevermind...

 

[terry w]

How does it take for tracking to update when it gets shipped status?

usually 1-3 days

 

[trouble1000]

I like it mate good night, don`t be dreaming about steam trains now

One thing i forgot to mention when dripping Ian is vaping style. What i mean by that is...when you take a draw, don`t just pull like you do with an evod etc. Draw directly into your lungs.you need an airy tank to do this, so get that airhole opened up mate, and give it a go.

I'm gonna get the drill out on my day off on Thursday.
But before then, I'm gonna try out the other drippers and ithaka first.

Thanks for the tip about inhaling too mate. To be honest, when I try a new delivery device, I always do a few sample draws first - draw into the mouth and let it straight out without inhaling. This usually gives me a good idea about the taste, vapour production and tightness of the draw.
I'd never take a massive hit on a new device, straight into the lungs, I'd probably explode
Appreciate the help though mate

 

[trouble1000]

Well I've just had a try with the V9 dripper (the one with 3 airholes). Getting some serious vapour off this one, but the draw was way too tight. So I lifted the top part of the body up so it was only half covering the internal air hole. Made sure the internal airhole was set at the right position between the two wicks. WOW, nearly fogged out the kitchen with a light draw

I've put it to one-side for now, til I can open up the 3 outer airholes and get my lower strength nic juice. I know using it the way I was, would be too much for me

On a positive note the batteries, wire, ecowool etc have all shipped today from vapegear, so with a bit of luck it should be here tomorrow, I can start using my new Paps then

 

[terry w]

Well I've just had a try with the V9 dripper (the one with 3 airholes). Getting some serious vapour off this one, but the draw was way too tight. So I lifted the top part of the body up so it was only half covering the internal air hole. Made sure the internal airhole was set at the right position between the two wicks. WOW, nearly fogged out the kitchen with a light draw

I've put it to one-side for now, til I can open up the 3 outer airholes and get my lower strength nic juice. I know using it the way I was, would be too much for me

On a positive note the batteries, wire, ecowool etc have all shipped today from vapegear, so with a bit of luck it should be here tomorrow, I can start using my new Paps then

On a positive note the batteries, wire, ecowool etc have all shipped today from vapegear, so with a bit of luck it should be here tomorrow, I can start using my new Paps then ...just a little update then Ian,

Glad you are getting on with the drippers mate, once mastered...well i don`t need to tell you now do i mate

 

[trouble1000]

...just a little update then Ian,

Glad you are getting on with the drippers mate, once mastered...well i don`t need to tell you now do i mate

I knew I'd be off here for a while so had to do an update that you could really get your teeth into

I'm really impressed so far with the drippers, even with the fog machine V9 in "not quite set up right" mode.
When I drill out the holes I'm gonna make each one slightly bigger than the last, say 1mm 2mm and 3mm - that way it will be properly adjustable. I don't really see the point of having all holes the same size. With the single hole v10 dripper, think I'll open up the airhole into a slot instead, see if that makes a difference - it will be similar to the ithaka then

 

[terry w]

I knew I'd be off here for a while so had to do an update that you could really get your teeth into

I'm really impressed so far with the drippers, even with the fog machine V9 in "not quite set up right" mode.
When I drill out the holes I'm gonna make each one slightly bigger than the last, say 1mm 2mm and 3mm - that way it will be properly adjustable. I don't really see the point of having all holes the same size. With the single hole v10 dripper, think I'll open up the airhole into a slot instead, see if that makes a difference - it will be similar to the ithaka then

Good idea with the V9 mate, that would make it similar to the trident i think.

I personally wouldn`t put a slot in the V10 though, I would imagine that would make it just way too airy. But it`s totally up to you mate

 

[trouble1000]

Pretty sure the V9 would work out ok.
But I've had another look at the V10. I was thinking it was the same as the V9 with inner and outer airholes - but it isn't. So change of plan with the V10, I'm just gonna drill an extra hole on the opposite side of the tube, one for each wick. What do you reckon ??

 

[terry w]

Pretty sure the V9 would work out ok.
But I've had another look at the V10. I was thinking it was the same as the V9 with inner and outer airholes - but it isn't. So change of plan with the V10, I'm just gonna drill an extra hole on the opposite side of the tube, one for each wick. What do you reckon ??

Yes mate thats the way to go Just wondering now, with all these different juices at the side of me,
whether to try some longbottom leaf, or old toby !!!

 

[terry w]

*****UPDATE*****

My ribbon wire arrived today.

 

[trouble1000]

*****UPDATE*****

My ribbon wire arrived today.

Old Toby for me

Well that was a short update, almost Hobbit size. Whereas my updates are more Smaug sized

 

[trouble1000]

Well here goes today's update. I'll split it in two for ease of reading.

Part One.

Got my tracking number today for the bagua clone from the co-op I was in. So it's on it's way from the USA now.
Both outstanding orders from FT have now been shipped.
My juice samples from megavape have been posted by Royal Mail 1st class.
RM tried to deliver my batteries, wire etc from vapegear today, but no-one home. So I'll pick it up tomorrow after work.

So that's the good news

 

[trouble1000]

Part Two

Now for the bad news :

Tried the ithaka today. Used Scott's review of the genuine Ithaka for guidance, as I'd taken it all apart to clean it.

Got everything set up. But the coils were taking ages to glow when dry burning/breaking in.
Added some juice, got a few good draws, good flavour but not a lot of vapour and very airy.

So I closed up the airflow adjuster - nothing at all, golf ball through a straw, you get the idea.

Half opened the airflow and opened the juice adjuster a little. Took a draw and all the whole contents of the tank emptied onto my mech, almost 2ml of juice, the rest went into my mouth

It's now being cleaned again. Gonna do a fresh coil and check all the washers on my day off, got a good idea what went wrong. But after that experience, I'm leaving it alone for a while

 

[itsrayray]

Just realized, this is the UK forum. Myyyyy baaaad.

 

[trouble1000]

Just realized, this is the UK forum. Myyyyy baaaad.

Don't worry about it Ray. We welcome posts from all countries here, we are quite friendly really

So please don't leave us

 

[Juicemoose]

I got two orders outstanding from the 25th and 27th of last month. These were small items but have not arrived, how long do you leave it before telling them they have not come Terry? whats the longest you have waited for your stuff to turn up?