Anyone Interested VV PT

[chibox]

Is there anybody interested in trying to make me a VV PT ? If this is something that you could do let me know. If you can then PM a price and see if we can make a deal. Thank you & God Bless

 

[Para]

Is there anybody interested in trying to make me a VV PT ? If this is something that you could do let me know. If you can then PM a price and see if we can make a deal. Thank you & God Bless

You can kinda make one yourself....take any passthru and hook it up to one of these.

 

[CraigHB]

Here's one for $50.

If you want to drive your dual coil cartos at 6V, here's one for $80.

 

[Lazrah]

um.... guys that thing is gigantic!! can't you just make a VV PT the sam way as you would a box mod?

 

[CraigHB]

Yea, you can. Just use a 6V wall wart and an LDO regulator. Simple thing really. Just a little box with a connector on one end for the wall wart and a USB connector on the other end for the passthru. Inside the little box is a 4 pin regulator and a potentiometer to adjust it. Optionally, you could go with a switching regulator and 9V wall wart. Not any more difficult to build and more efficient with no heat concerns. With a switching regulator, you can use a wall wart with lower max current output, probably a 9V 2A would be plenty.

Hopefully someone will offer to make you one, but if not, it's really not hard to do yourself.

 

[hairball]

I asked in a thread about VV PT also. Gotvapes just got VV eGo PT's in. $24 plus shipping. Will do 3.2, 3.7 , and 4.2V's.

 

[FunkyVapes]

You can kinda make one yourself....take any passthru and hook it up to one of these.

Oh my, that looks intimidating. Very practical solution though.

 

[CraigHB]

I asked in a thread about VV PT also. Gotvapes just got VV eGo PT's in. $24 plus shipping. Will do 3.2, 3.7 , and 4.2V's.

Interesting, hadn't seen that before. Though it's not a true VV device since it has limited voltage settings. Ideally, you want continual or finely incremental control up to 6V. But, the price sure is right.

 

[zoiDman]

Interesting, hadn't seen that before. Though it's not a true VV device since it has limited voltage settings. Ideally, you want continual or finely incremental control up to 6V. But, the price sure is right.

I think it comes with a FREE carrying case also.

GotVapes eGO Variable Pass Through 510 - 3.2/3.7/4.2 STAINLESS [gv-egoPTVV-stainless] - $24.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

 

[brewsterfrank]

Interesting, hadn't seen that before. Though it's not a true VV device since it has limited voltage settings. Ideally, you want continual or finely incremental control up to 6V. But, the price sure is right.

true that its not a VV in the since that we are used to, but according to definition a device that can change voltage is Variable, even if it only has two settings, lol. but i agree i would rather have adaptability.

 

[chibox]

Thank you all so much for everyone's advice. The funny thing is I can build a shed and make brick stairs. But doing something with wires I have no shot.

 

[5cardstud]

This is what I use. It works pretty good.

 

[Java_Az]

Here is my PT that i hook to a variable card just like the one 5 card has in the box.

Ego coneable

Ego tankable

It can also be used for self defence by whipping it around by the cord and smacking people in the head with it. The best part is that the chicks dig it. Ok i might have made that last part up

 

[VpnDrgn]

I could help you out. All I've got on hand though, is the VV component. ( being out of work sucks )
You could get all the needed parts from Madvapes except the power supply. You can get the power
supply from Amazon pretty cheap. It would basically be a VV box mod with digital display and a
DC jack for the power supply to plug into. You supply the parts and we can work out a trade on
the labor. PM me if you're interested.

ps. The VV board I have is only rated 3 amps, if you're using DC cartos, you'll only be able
to go up to about 4.3 volts, unless you get a 6 amp OKR component