Are there any flat tip carts that don't fit loose?

[son et lumiere]

The flat tip carts fit loose compared to the round carts I have. I was wondering if there were any flat tip carts that fit tightly in the 510 atomizer. I have a little piece of tape on my flat tip carts right now to make it so they fit snugger.

Thanks

 

[jaded]

901 carts I think I saw will work and fit better.

 

[Guineahill]

The 901s that I have are snug on my 510. And they are a bit thinner at the end. I like them quite a bit.

 

[son et lumiere]

I got my flat tip carts from cignot and they fir loose. Does anyone know if they are 901 or 501 flat tips because i'll get whatever fits the most snug.

 

[Guineahill]

I find that the 901 cartridges are more snug. Cignot sells 510 cartridges. Both will fit on a 510.

 

[son et lumiere]

Didn't know that. Thanks.

 

[Scottbee]

Yes, the 901 whistle tips fit nice and snug on a standard Joye 510 atty. They fit pretty well on the L2 atties too.

I got my 901 whistle tip cartridges (D-shaped reservoir) from Rob at Vaporkings.

This is what they look like:

 

[Kurt]

The 901 carts do fit, but I'm always concerned the atty-insert part is not the right shape for the 510 atty coil, and might get melted. Crescent shaped as opposed to the 510 cart oval shape.

 

[Guineahill]

901 cartridges work well for me - and yes, they do have a bigger opening than the 501 cartridges do. I use the BFD (Blue Foam Dart) for filler and haven't had a problem with leakage. They wouldn't hit the bridge because they have an even larger opening than the normal 501 cartridges do.

 

[Kurt]

901 cartridges work well for me - and yes, they do have a bigger opening than the 501 cartridges do. I use the BFD (Blue Foam Dart) for filler and haven't had a problem with leakage. They wouldn't hit the bridge because they have an even larger opening than the normal 501 cartridges do.

The bridge is not the problem. the bridge is not the heater. It is the shape of the coil heating element, which is oval. But if your 901 carts are not getting the little melt-bites on the edges, then it is probably not a problem. If they are, then there is a problem, as in inhaled plastic materials.

 

[WonderfulMe]

Some 510s will fit snug some won't, it's a problem with the atty, all the carts are the same (I think) When I got a batch of attys like this I put them all in a clamp pinching right in the middle and squeezed just a little, not even enough that you see a noticeable difference or mess up the paint. this helped the carts fit more snugly, but only if I put them in a certain way. Might be worth trying.

 

[DarKm4773r]

The 510 whistle tips from Cignot fit perfectly fine on mine.

 

[doots]

I use 901s too on the 510. tight..

 

[Guineahill]

The bridge is not the problem. the bridge is not the heater. It is the shape of the coil heating element, which is oval. But if your 901 carts are not getting the little melt-bites on the edges, then it is probably not a problem. If they are, then there is a problem, as in inhaled plastic materials.

The heating element in all of my atomizers is way under the bridge... so melting carts isn't an issue I have had to deal with. So no... they are NOT melting.

 

[son et lumiere]

Do the 901 carts hold the same amount of liquid as the 510 carts?

 

[Clem68W]

The 901 carts do fit, but I'm always concerned the atty-insert part is not the right shape for the 510 atty coil, and might get melted. Crescent shaped as opposed to the 510 cart oval shape.

I've melted the 510 cartridges a half dozen times so far, and I have yet to melt a 901 cartridge. Just one guys experience, but I think they work great. I don't bother using the 510 carts anymore.

 

[Guineahill]

Do the 901 carts hold the same amount of liquid as the 510 carts?

I think they are about the same. Next time I refill carts I'll measure and let you know.

 

[LoveMeTender]

The only 510 flat tip carts I bought were from Altsmoke and they fit as tightly as all the round carts I have. I can unscrew a fairly tight atty using just the carts.