Are there any regulated PV mods or mech mods that are vertically flush with the Protank 2
- Thread starter OllieDixon
- Start date
- th_trl_thread_readers 0
- Status
Wait a month or two and Kangertech will probably release a Protank 2.5 version (or should I say 2.2 - think about it) that will be flush with most mods
Kangertech is taking a page from Apple (and the electronics industry in general) "only release improved products as fast as it takes for market saturation on the last version"
Kangertech is taking a page from Apple (and the electronics industry in general) "only release improved products as fast as it takes for market saturation on the last version"
I've only been able to find these.. but apparently they are garbage.
Oh dear!!! I've had a couple of those X6's in daily use for several months with no issues ... and a smok Zmax Mini with no issues as well. I am shocked, shocked I tell you, to find out I've been vaping garbage for so long!! Excuse me, I have to call my doctor ... and my therapist immediately.
Flush with what?
Tanks?
The Provari VV is flush with almost all my tanks. Most are about 19mm.
Carto tanks
Protank 2
Aspire Vivi nova
Hyper tank
Smoktech UDCT
Tapatalking on iPhone.
Join the CASAA.
Protect your Vaping Rights!
Tanks?
The Provari VV is flush with almost all my tanks. Most are about 19mm.
Carto tanks
Protank 2
Aspire Vivi nova
Hyper tank
Smoktech UDCT
Tapatalking on iPhone.
Join the CASAA.
Protect your Vaping Rights!
Oh dear!!! I've had a couple of those X6's in daily use for several months with no issues ... and a Smok Zmax Mini with no issues as well. I am shocked, shocked I tell you, to find out I've been vaping garbage for so long!! Excuse me, I have to call my doctor ... and my therapist immediately.
Your excused. Let us know how your session goes (P.S. I wasnt talking about the Zmax Mini.. it just happened to be in the pic
)None of those are vertically flush on a Provari. The Provari is like 3-4 mm wider.
Last edited:
Doesn't have to be perfect. id settle for 20 mm like the X6. Not necessarily ....-butty. Just figure i use protanks and am going to buy some new stuff soon, might was well try to find something good that pretty flush.
You want flush fit with your X6? As in be the exact same diameter as the body of the rig right?
PT2 shows to be 18.5mm on FT, Kamry K6 shows to be 19mm, so you need a 19mm tank
If you like the bottom coil EVOD or Kanger type heads, there are quite a few 19mm tanks on FT
There is a 19mm T9 tank from FT that is alot like the iClear 30 tanks, 19mm
$5.72 T9 Round Mouth Clearomizer - black / 2.4ohm / rotatable drip tip at FastTech - Worldwide Free Shipping
Vivi nova top coil tank 19mm
$6.60 Authentic Vivi Nova V7 E-Cigarette Round Mouth Atomizer w/ Two Heating Cores (3.5mL) - 1.8
PT2 shows to be 18.5mm on FT, Kamry K6 shows to be 19mm, so you need a 19mm tank
If you like the bottom coil EVOD or Kanger type heads, there are quite a few 19mm tanks on FT
There is a 19mm T9 tank from FT that is alot like the iClear 30 tanks, 19mm
$5.72 T9 Round Mouth Clearomizer - black / 2.4ohm / rotatable drip tip at FastTech - Worldwide Free Shipping
Vivi nova top coil tank 19mm
$6.60 Authentic Vivi Nova V7 E-Cigarette Round Mouth Atomizer w/ Two Heating Cores (3.5mL) - 1.8
Last edited:
My Protank clone measures 20mm dia. at the base (it's probably spec'ed the same as the original) which means any mod using 18xx0 bats could have tube walls only 1mm thick and that doesn't allow batteries much room to slide in/out easily. And batteries that may be only a thousandths of an inch larger in diameter than 18mm simply wouldn't fit.
There are 21mm dia. mods, That extra mm allows most 18xx0 batteries to fit.
Just off the top of my head, the Origin or it's clone are 21mm mods but there are others.
On the other hand, there may be 20mm e-cig stick batteries - IDK.
There are 21mm dia. mods, That extra mm allows most 18xx0 batteries to fit.
Just off the top of my head, the Origin or it's clone are 21mm mods but there are others.
On the other hand, there may be 20mm e-cig stick batteries - IDK.
No..
I do not have an x6. Did some research and it sucks. Which was disappointing because as i was looking around for something today i came across it.. it looks great with a protank 2 on it.Thanks for the info. I was just looking at that clone. Supports 18650 and a kick!
No..
Hmmm..... I've been using the X6 with my Protank and 2.2 ohm coils for a few weeks now and I have no complaints about it. I get great hits and the charge lasts for about 3 days.
Sent from this thing using that thing
I'm sure some of them work OK. However, i don't get what the point is in having a any volt setting that doesn't stay at those volts. 3.8 will give you 3.8 until the bat goes under 3.8. Then it gives the bats voltage. It's not regulated so it just drops over time like a mech mod. The 4.2V setting is useless after two vapes. That sucks. If it was regulated (like my evod bat that will stay at 3.7 until a few seconds before it dies) id buy 20 of them right now. Love the look.
Last edited:
Huh, haven't run into that problem yet. Although I do charge it often. Once every 36 hours or so, and I agree with you about the 4.2V setting. I almost never use it tho.
Sent from this thing using that thing
I had an X6 and loved it....till I killed it on a shorted atomizer. IMO, it looks great with a protank. My only gripe with it is that it would have been nice to have a voltage setting over what a fully charged battery already has.
Electron-s or Emode fit flush. I having been using mine for a month now exclusively - no fail, no garbage. Lines up great with Protank.
Wow! awesome! Thanks man. *Looks* ..... and its $130
It's new, wait for a while and it will drop in price. You may also be able to find a Christmas sale on it if you look hard enough...
HTH
- Status
Similar threads
