arrgh

[featherpaint]

ok im not sure if I'm in right place but it seems like everytime i put only 3-4 drops of juice in my 510(with brass screen cart ) it starts leaking between the atty and the battery. I have it on pretty tight too.Is it just the nature of the beast or what? Have had it going on bout 3 days now

 

[gashin]

There's nothing in the 510 atomizer that'll stop all leakage - I usually do 2 drops and this helps a bit though it is inconvenient.

ok im not sure if I'm in right place but it seems like everytime i just put only 3-4 drops of juice in my 510(with brass screen cart ) it starts leaking between the atty and the battery. I have it on pretty tight too.Is it just the nature of the beast or what? Have had it going on bout 3 days now

 

[MsSki]

I hope some one can help u with this. I have a 510 but only use the PTB frayed ends.
Tara

 

[Rahz]

When I was using stock batteries (510), I could only get 2 drops in. More than that can cause leaking and gurggling. Obvious solution is to only use two drops at a time, but to make life easier I would suggest thinking about removing the tip, reservoir, and then drill out the rectangular cart, which will allow you to drip directly through the cart.

Also, once I switched to a mod that runs a little hotter (Chuck -w- 18650s) I now add 3 drops at a time, and could add 4 at a time if I really wanted too.

 

[FrogHat]

I hope some one can help u with this. I have a 510 but only use the PTB frayed ends.
Tara

Try this in a cart and see how you go.

I use this and have no issues with a 510

 

[maureengill]

I've found better success with my 510 and the standard filling by pushing the filling down into the bottom of the cart and I can drip 4 or 5 before it pools at the top. I also find it seems to wick better this way for some reason. You can also do this with the straw mod and pushing the original filling down. Also make sure your atomizer is on tight...sometimes it will leak because it's not tight enough.

maureen