Donut alert on the classified
that's the one that matches my orange one, i love the blue one
hey bill, what ever easier for you will work
, would love to see the ones you have Art Glass Drip Tips
- Thread starter bert1983
- Start date
- th_trl_thread_readers 0
- Status
that's the one that matches my orange one, i love the blue one
hey bill, what ever easier for you will work
, would love to see the ones you have 
Donut alert on the classified
I would love to own that one again.....I don't have anything donut worthy that i'm willing to give up right now:/
Kami,, all VV works like this and regulates the mod/Vape ( Power buck boost circuitry or stabilized regulator ) either using one of two methods, the VV Reo utlizes Buzz's chip which is a very good chip, so yes it holds the voltage until Batts discharge. I've got a kick in my Reo Grands as well,,, and the kick is good for what it is intended to do,, but I rather a true VV Mod using the full Batt or Batts with the electronics built in, when Brandon releases his Modders board this should change the game a bit more, giving bottom feeders the same electronics that Darwin utilizes which in my honest opinion are the best Electronics on the market today for Mods, so it will be nice to see and use bottom feeders with these Evolv Electronics soon. However, the VV Reo is a fabulous PV and one that doesnt seem to leave my hand at all during the day I love this unit.
@ Blueswatch, as promised here is an Atty in one of my tanks, just tilt to fill and vape till another tilt is needed, works super,,the other set up I'm using though is different and works even better, you will have to PM me and I will discuss rather then post it, just put Atty in tank and tilt it so juice drops into Atty = very simple and works = long barrel is best = shown is short barrel, a long barrel 510 works better, this short barrel I have in this one though, long barrel you can get more juice in the tank
You can also slide the tank up a little when juice lowers so juice is always near the top edge of the Atty for easy filling. I can get about 5ml's in this tank with the longer barrel in it, and that's plenty for me, but like I said my other set up works even better and is an all SS Tank and works more off of a feed system then tilt and vape to fillAttachments
Last edited:
Kami,, all VV works like this and regulates the mod/Vape ( Power buck boost circuitry or stabilized regulator ) either using one of two methods, the VV Reo utlizes Buzz's chip which is a very good chip, so yes it holds the voltage until Batts discharge. I've got a kick in my Reo Grands as well,,, and the kick is good for what it is intended to do,, but I rather a true VV Mod using the full Batt or Batts, when Brandon releases his Modders board this should change the game a bit more, giving bottom feeders the same electronics that Darwin utilizes which in my honest opinion are the best Electronics on the market today for Mods, so it will be nice to see and use bottom feeders with these Evolv Electronics soon. However, the VV Reo is a fabulous PV and one that doesnt seem to leave my hand at all during the day I love this unit.
@ Blueswatch, as promised here is an Atty in one of my tanks, just tilt to fill and vape till another tilt is needed, works super,,the other set up I'm using though is different and works even better, you will have to PM me and I will discuss rather then post it, just put Atty in tank and tilt it so juice drops into Atty = very simple and works = long barrel is best = shown is short barrel, a long barrel 510 works better, this short barrel I have in this one though, long barrel you can get more juice in the tank
How on earth do you keep from flooding the atty?......LOL....if that were mine it would be screaming for a life guard
How on earth do you keep from flooding the atty?......LOL....if that were mine it would be screaming for a life guard
Actually you would think that right,,, but not at all Kami,, especially when your using the 357 Atty , there all I really use,,they dont leak like regular Attys do and you can vape right through any overage if need be. I also have a way to make a i06 work in a tank too
but my other set up is even better, to hard to explain by posting,, though I dont care for GG Stuff much any longer, you have an Odysseus right ? If so PM me and I will tell you how to Mod it to make a 510 Atty work without using Big Mode and in a short mode without using the Atty sleeve which is a pain in the ... in my opinion, and the big 510 mode leaks and is just a pain, where my modded version works better
Last edited:
I'm liking a bunch of stuff.............. did Bert say anything about a sale today or is it just rumor?
sure ...why not......he's got a kabillion to get rid of and more on the way...
You wont hear me complaining, I just didnt know the game plan, I would love another Donut, in fact 5 more to full fill these other mods I have hear screaming for one to sit a top of them
So before I post the next series of pictures I would like to make a disclaimer.
My name is Freddy Faerron. I have been an established artist for over 20 years. I am 43 years old. My jewelry has been shown in a national television series (Dharma and Greg) Chuck Lorre productions purchased my choakers from Maya Hatcha in Coconut Grove, Florida and utilized them in episodes of Dharma and Greg. I have developed exclusive lines for Japan in borosilicate glass. I have been a professional fabricator of Stained Glass panels for Bill and Irene Powell (Stained Glass Artist) I am a humble artist; but now that i am creating dialog with Robert Langan's design of art glass drip tips, I am extremelly sensitive to uphold the intellectual property of both his design and my dialog with his art. I have recently become aware that a competitor asked one of my peers in lampworking to duplicate our dialog with the art glass drip tip. That! is a huge violation of intellectual property. I am not at all pleased about this turn of events. I; as an offline supplier, am introducing this dialog to other established artist whose intellectual property is as established and developed as mine. I appreciate and honor every collector of the art glass drip tip that I have created for trippy tips. This dialog that Bert (Robert Langan) initiated is exciting many artist in my community to participate in developing their own expressions. That said, if you are an artist that has stumbled upon our product, please don't hesitate to contact Bert. If you are lurking in the shadows with an intention to copy and market our designs, back off! I am not in the least intimidated nor will I keep from involving legal measures. May you as collectors, feel my love and respect for I am honored to create for this incredible dialog.
yours truly,
Fredrick Faerron.
My name is Freddy Faerron. I have been an established artist for over 20 years. I am 43 years old. My jewelry has been shown in a national television series (Dharma and Greg) Chuck Lorre productions purchased my choakers from Maya Hatcha in Coconut Grove, Florida and utilized them in episodes of Dharma and Greg. I have developed exclusive lines for Japan in borosilicate glass. I have been a professional fabricator of Stained Glass panels for Bill and Irene Powell (Stained Glass Artist) I am a humble artist; but now that i am creating dialog with Robert Langan's design of art glass drip tips, I am extremelly sensitive to uphold the intellectual property of both his design and my dialog with his art. I have recently become aware that a competitor asked one of my peers in lampworking to duplicate our dialog with the art glass drip tip. That! is a huge violation of intellectual property. I am not at all pleased about this turn of events. I; as an offline supplier, am introducing this dialog to other established artist whose intellectual property is as established and developed as mine. I appreciate and honor every collector of the art glass drip tip that I have created for trippy tips. This dialog that Bert (Robert Langan) initiated is exciting many artist in my community to participate in developing their own expressions. That said, if you are an artist that has stumbled upon our product, please don't hesitate to contact Bert. If you are lurking in the shadows with an intention to copy and market our designs, back off! I am not in the least intimidated nor will I keep from involving legal measures. May you as collectors, feel my love and respect for I am honored to create for this incredible dialog.
yours truly,
Fredrick Faerron.
5?...I have 0 and you are scheming for 5?.......holy cow I am soooooo behind you guys
Here's my most awesome friend, James Yaun digging his own signature non dichro on a 510 type B
My very first 510 type B made without the commercial scientific joint. I fabricated my very own taper with James Yaun's signature non dichro. This tip will be in Robert Langan's private collection. It's a gift to him.
View attachment 86666
My very first 510 type B made without the commercial scientific joint. I fabricated my very own taper with James Yaun's signature non dichro. This tip will be in Robert Langan's private collection. It's a gift to him.
Very cool like a Trippy Shroom
View attachment 86668No shopping for me tonight guess what I'll be doing?? This one is for ALL you Beautiful Filly's in Trippyville, Yippi Ki Yay!!!!!
(and yes I will be working on my stashe picture)
(and yes I will be working on my stashe picture)
This is the most complicated art glass drip tip I have fabricated so far. It's a laminated linework tip with James Yaun's signature non dichro as a fitting. It's for the 510 type B. Another piece in Robert Langan's privated collection. I'll let them figure out who gets which one (him and his lovely wife) Thank you for admiring these two creations, I will be fabricating more. Have! an awesome evening. I have been burning the candle on both ends lately...tonight is for rest and relaxation.
- Status
Similar threads
