The mechanical Reos are the Grand, Mini, and now metal 18490's all the rest have wired switches etc the electronics in the VV's are the same as the Buzz Pro
Art Glass Drip Tips
- Thread starter bert1983
- Start date
- th_trl_thread_readers 0
- Status
The mechanical Reos are the Grand, Mini, and now metal 18490's all the rest have wired switches etc the electronics in the VV's are the same as the Buzz Pro
Do you find it to be easy to mess with?....are there notches so you know about what voltage your vaping?
have you tried the agave nectar Mwa? I've thought about it, I'm just a bit scared I'm going to have a reaction to it too... I can use real sugar and corn syrup just fine, but anytime I've tried something that's supposed to be better for you I've had a reaction
Corn syrup wreaks havoc with my blood sugar, cant use it or have to watch and only take in very little of this De,,,I have to watch everything I eat and eat very healthy and exercise a lot,,,, I try to control my diabetes with Diet and exercise more then meds.
Its easy to turn but theres no notches but for me I dont really play with it and I like it hot so I just turn it all the way up then back it off till I hit the sweet spot
I really like the consistent voltage thru the life of the batteries which is about 6mls of juice
Dang........I do not get that out of a ProVari with 18650's.....
I have two bottom feeder getting built now, stacked DNA units in each, good bottom feed system,,,, 2 X Li=On pack Batts,,trying to see if I can use the Evo 3500's so I have 7000mAh, there gonna be monsters, 24W output. Gonna be fun making up some 10ohm Attys, and some triple coil stuff to experiment with.Should be interesting to say the least...probably a 1 second vape .. I have another design I want to try,,, it includes 2 x Li-On pack Batts back to back, with a thin gas tank type tank, 2" x 4'' by 3/8" thick fuel tank. The Mod will be like the size of a deck of playing cards, just a tad taller. This will be cool, I'm trying to figure out how I'm gonna build this Liquid storage tank, probably will be made from a thin sheet goods of SS, with a small set screw to remove to fill with a syringe. Looking forward to building this one and taking my time doing it.
Gonna be fun making up some 10ohm Attys, and some triple coil stuff to experiment with.Should be interesting to say the least...probably a 1 second vape .. I have another design I want to try,,, it includes 2 x Li-On pack Batts back to back, with a thin gas tank type tank, 2" x 4'' by 3/8" thick fuel tank. The Mod will be like the size of a deck of playing cards, just a tad taller. This will be cool, I'm trying to figure out how I'm gonna build this Liquid storage tank, probably will be made from a thin sheet goods of SS, with a small set screw to remove to fill with a syringe. Looking forward to building this one and taking my time doing it.
Last edited:
I really like the consistent voltage thru the life of the batteries which is about 6mls of juice
Yup, I get just about the same 6ml's, the 2 x 18350's are a nice set up, I set my voltage and forget it with a 357 a top
If the tank is SS how do you squonk it?I have two bottom feeder getting built now, stacked DNA units in each, good bottom feed system,,,, 2 X Li=On pack Batts,,, there gonna be monsters, 24W output.
It will be done from a very thin SS Kami, it will have flex in it, as much as I can get, if the SS doesnt work I may have to go to a Tin, but it will work, I will have the hose go to the bottom corner of the tank right to the connector, totally sealed.
Edit; I'm pretty sure the very thin SS will work, I hope anyways
I wanted a clear window where the squank hole is going to be too, but I think plastic will wear out plus I'm not liking plastic touching my juice any longer so thats out
Edit; I'm pretty sure the very thin SS will work, I hope anyways
I wanted a clear window where the squank hole is going to be too, but I think plastic will wear out plus I'm not liking plastic touching my juice any longer so thats out
Last edited:
I have a couple of multi battery mods........a Gepetto with two 18350's and a Minxy with two 16340's......neither of them last that long.....and I'm not a high voltage girl....like 4.2-4.5... wonder why mine do not last as long?
It will be done from a very thin SS Kami, it will have flex in it, as much as I can get, if the SS doesnt work I may have to go to a Tin, but it will work, I will have the hose go to the bottom corner of the tank right to the connector, totally sealed.
Edit; I'm pretty sure the very thin SS will work, I hope anyways
K...better let a blonde beta test it
I have two bottom feeder getting built now, stacked DNA units in each, good bottom feed system,,,, 2 X Li=On pack Batts,,trying to see if I can use the Evo 3500's so I have 7000mAh, there gonna be monsters, 24W output.
thats sounds crazy cool Matt
Thanks Pietro,, my imagination runs wild at times, but this one was a good thought Kami, dam I cant say what I want too
Kami, dam I cant say what I want too
Thanks Pietro,, my imagination runs wild at times, but this one was a good thought
yes you can.............no espousing police in the area
What Batts you running Doc I'm using AW IMR's and 5-5.5v w/2.5 ohm HH357
Likewise........I took your advise Matthew and have only AW IMR batteries purchased from an American company Lighthound... I was concerned with the fake AW's 
and someone else in the thread, I've forgotten who.....I've numbered them all so I am sure of the rotation
and someone else in the thread, I've forgotten who.....I've numbered them all so I am sure of the rotation
- Status
Similar threads
