Art Glass Drip Tips

[bert1983]

Well, I am off to the studio. Finally kicked this headache

 

[Delilah718]

Congratz to Beata When does she start Bert?

 

[bert1983]

Blu is no squonker-lol. Take it easy on the bottle press girl.

ETA:
Oh, and my Snootie tip is perfect with a reo-I need not tilt the reo to vape!!!!!!!!!!!!!!!!!!!!!!

LOL Snootie Tip!

 

[sashwa]

Squonk gently Blu and use a donut.

Congrats to Beata.

 

[bert1983]

She starts a week from Tuesday Delilah

 

[bert1983]

Are there any RBAs that are made for bottom feeding?

 

[HzG8rGrl]

For the next renovation I have decided to use this tile

with this counter top

. The counter is not as black and has sparkle throughout. White cabinet with the mineral paint on the walls. And the specks aren't as prominent.

 

[Delilah718]

She starts a week from Tuesday Delilah

FAbuloso!

EDIT: RBAs for bottom feeding I've heard of are the ERA and Chalice by Mark Bugs

 

[HzG8rGrl]

Are there any RBAs that are made for bottom feeding?

The ERA, from the Philippines.

 

[HzG8rGrl]

Bert, I have a second one coming in the next batch. If you want to try it, I can forward it to you when it gets here.

 

[BluSwatch]

Bert - I have a donut on here .... I have overcome the donut!!! Oo-Rah!
I sucked a bunch of juice up the donut ....

Sounds like you might be over-squonking...throw a donut on there!

 

[Delilah718]

Redeyedancer just put up this thread Bert:

http://www.e-cigarette-forum.com/forum/reos-mods/326612-era-atomizer-please-read.html#post7041532

 

[HzG8rGrl]

Bert - I have a donut on here .... I have overcome the donut!!! Oo-Rah!
I sucked a bunch of juice up the donut ....

It can so be done-LOL. Been there, done that--got a wider splash guard Bert? Double donut-one on top of the other!!!!!!!!!!

 

[HzG8rGrl]

Redeyedancer just put up this thread Bert:

http://www.e-cigarette-forum.com/forum/reos-mods/326612-era-atomizer-please-read.html#post7041532

I read that and have not experienced the pin problem as they experienced. So far all you have to do is adjust the pin by using a small jewelers screwdriver to recess it a bit. Or do the hammer thing, tap, tap, tap.

 

[Delilah718]

Bert - I have a donut on here .... I have overcome the donut!!! Oo-Rah!
I sucked a bunch of juice up the donut ....

Oh Blu! Nice to see ya I think maybe the term is throwing you off Blu -- it's more of a gentle press, especially when the bottle is full, than a squonk

I only squonked when the bottle was 2/3 empty I hope that helps.

 

[BluSwatch]

DD and I have to run for an appt .... BBL.

 

[Cyclin]

Phew ok done with that work for a minute

Built another Trippy holder design, it just needs some legs and some etching. I've made like 4 designs this week and each time my bosses "catches" me... then we spend an hour debating on how to improve it He had a great idea for extension pieces, like one which adds some hole, has a slide top box to put juice, pv's, etc. (except he calls them "pipes" haha)

 

[Delilah718]

I read that and have not experienced the pin problem as they experienced. So far all you have to do is adjust the pin by using a small jewelers screwdriver to recess it a bit. Or do the hammer thing, tap, tap, tap.

Hi HzG

Well, I hope it goes smoothly for Bert too I applaud you guys, early adopters!

 

[HzG8rGrl]

If you want to read up a bit, here is a link to the FB group:Log in | Facebook

 

[Delilah718]

Phew ok done with that work for a minute

Built another Trippy holder design, it just needs some legs and some etching. I've made like 4 designs this week and each time my bosses "catches" me... then we spend an hour debating on how to improve it He had a great idea for extension pieces, like one which adds some hole, has a slide top box to put juice, pv's, etc. (except he calls them "pipes" haha)

Hey, your boss sounds like a decent guy Can't wait to see pics!!!!!