Art Glass Drip Tips

[Starlight682]

Well, I survived the kids driving lesson tonight, barely. Lol. I should of known when he tried to put it in reverse without hitting the brakes.

it couldn't have been as bad as mine and my moms lol i drove us into a big ditch while turning a corner

 

[Brew1961]

So I got to thinking about the inlet size problem and it occurred to me that maybe the issue isn't one of size but more a problem of the draw being too smooth. The airy draw is more an issue of a perfectly smooth draw and a tight draw is still smooth but choked off. In thinking about regular atties, there are no adjustments and Joye seems to provide a very nice feel to the vape. The difference is turbulence. Looking into creating turbulence in a flow of air, a study of fluid dynamic states "creating smaller and smaller structures which produces a hierarchy of eddies" So my thought is creating a single tubular, cylindrical port with two (or more) restrictive baffles like so:


I think the 2 hard turns taken by the air (might need baffles to overlap but not sure)would result in a more turblent flow that would still blow across the coil properly. I'd have to sample it but perhaps then the 1/16" hole would be appropriate. From what research I've done the 3/64s and 1/16s openings are preferred and vapor + flavor increase with those modifications. My experience is yes they do but the draw is just too smooth. Not sure what else I can offer but I will continue to think about this design. Brew

Beta Tester, Beta Tester, Oh, Oh, Oh!!

I haven't a clue how to design a baffle to induce turbulence without testing along the way. I was hoping to see Matthew pop in to tell me exactly how that might be acheived and that he did that 6 months ago Sorry buddy couldn't pass that up. You know you're the man right!
At the moment, the ideas that come to mind stem from the FATTY design that has a knurled ring which threads down over three holes and this allows you to adjust the flow but I need to think about how to achieve a sliding cover in glass to acheive the same result. You're right since some folks want 1/32", others say 3/64" and some are all about 1/16" for the inlet, it makes your job more difficult. You'd almost have to enbed a small threaded tube that had a side-ported cap or holes in the tube where as you screwed down the cap, you'd close down the draw. Still chunking. BBL Brew

 

[BluSwatch]

Hubby said they also have ........ wait for it ......

 

[Cyclin]

Star looks like we were close The Cappy said no 3 outta 3's yet just now lol

 

[pmoraldo]

no worries about the party cyclin, wharf and blu and sun and everyone raised the roof with me lol , sounds like you had your hands full later night anyways

Is that Blu raising the roof

can you steal her off this delilia?

oh, look....im beardless,lol.

Nice pic Mike

Good afternoon Trippyville,
Well I'm all in my happy place and have enjoyed going back into the halls of Trippy-central. So great to see all of the Trippy Tips that go back to when I first started lurking the thread. I am also happy to be getting better at the ERA coil and wick building although I don't think I'll ever get over the airy draw. I have been using 510s & 306s for so long that the air turbulence I get as the air passes through all of the channels in those atomizers seems to be a requirement for my total enjoyment. Every now and then I'll get the coil sizzling on the ERA and that feels great but I can't figure out how to make that happen everytime. I also got very used to the short, hard pulls on the gurgley HH.357s so I miss that as well. Now I try to pull long and slow to get the denser vapor I'm wanting. I think someone needs to add a baffle to the ERA that directs air onto the coil but also duplicates the pull off a 510. I ordered some 3mm Silica and will try some differing coil techniques to hopefully replicate the coil sizzle. I really need to fill the air hole back in to try a 3/64" inlet. I'm still wondering if the JB Weld material would be safe to vape through. That or resoldering and drilling the appropriately sized hole in that compound. Either way "Just Say No, Thank You" to the 1/16" air inlet. Brew

No on the JB weld not healthy did you try the disposable razor mod? If you dont hear a sizzle either you haven't squonked enough or you dont have you VVG turned up high enough or both!!!! Don't make me come over there and teach you

Hey Brew,
PM me a pic of the baffle, rough sketch is great, and I will work on it. I am going to be r&d ing some top caps for those this week.

Im in town for Beta testing Bert so I can give you immediate feed back Just saying

Hey guys! Sorry I haven't been on I have been sick all day. I am heading to the doctor...congrats again Star!! Catch up later

So sorry your not feeling well

Evenin Tripsters -- wearing my cloak

and keeping up on the thread

I completed the card and PM'd to Freddy I thought you'd like to see it too

Damn we got some sexy Trippy women around here!!!!!


Evening Tripsters waaaaaaaaaaaaaaaaaasssssssssssssssssssssuuuuuuuuuuupppppppppp!!!!!!!

 

[Cyclin]

Hubby said they also have ........ wait for it ......

Looks absolutely horrible lol

To the point where I gotta see it haha. Btw, if anyone ever asks you to watch "Jesus Christ - Vampire Hunter", just don't....

 

[Cyclin]

Hubby said they also have ........ wait for it ......

Looks absolutely horrible lol

To the point where I gotta see it haha. Btw, if anyone ever asks you to watch "Jesus Christ - Vampire Hunter", just don't....

 

[AmberB]

Where any of these movies made by troma? Lol

 

[Fudgey]

Evenin Tripsters -- wearing my cloak

and keeping up on the thread

I completed the card and PM'd to Freddy I thought you'd like to see it too

Awesome job!!!!!!!

Well, I survived the kids driving lesson tonight, barely. Lol. I should of known when he tried to put it in reverse without hitting the brakes.

Glad you made it out alive

Congrats on your vet status Star!!!!

Happy Anniversary Beata and Bert!

Nice pic Mike

Evening Trippyville

 

[Cyclin]

Evening Fudgey!

 

[Fudgey]

Evening Fudgey!

I loved that last picture you posted of your little cutie pie daughter!

 

[Cyclin]

I was serious about that movie tho, don't watch it it is just awful.

But maybe tell your hubby if this really is the sorta thing he likes haha

 

[Fudgey]

But the cover makes it look so interesting

Has anyone seen Abraham Lincoln VS Zombies DH has it on his Netflix queue.....

 

[Cyclin]

I loved that last picture you posted of your little cutie pie daughter!

Thanks!

Sometimes her smile is a little off tho lol... This is what we call her "creepy face" she does it when shes not really sure if she likes someone or not

 

[Fudgey]

Too cute!!!!! When my daughter was little she had a little sneaky sideways look........cracked me up every time!!

 

[mrssoonerfan]

Evening trippies! That's a very good pic Delilah!

 

[Cyclin]

Lol I love every little thing she does, well maybe not everything

Being a parent is awesome I wish I took a picture between these posts I ate some chicken noodle soup and she was climbing up my legs for little bites it was too freakin' cute

 

[misplacedsooner]

your so good at making those pics delilia.. patti s trying to figure out how to print it off now,lol.

 

[Cyclin]

Ok guys I gotta go handle some stuff seeya later

 

[Starlight682]

cyclin she's so cute i miss that age *sigh*
that's the oh you ya i don't think i like you all that much mister no, no your close enough, i swear i'll cry if you get any closer look