uh oh... should we worry about your safety when you go home?
Hell no that chick is crazy! You should start worrying about my safety right now!!!
Art Glass Drip Tips
- Thread starter bert1983
- Start date
- th_trl_thread_readers 0
- Status
Hell no that chick is crazy! You should start worrying about my safety right now!!!
Bert - The Green Hornets were nice too, went they went to 22oz .... less trips to the store.
Thanks Blu!
I looked real quick and saw that .... the description is "Winey fruitiness comes forward first—red grape skin, peach, cider—followed by ripe fresh dates, figs, apples baked in brown sugar, maraschino cherry, and whiff of gingerbread and milk chocolate."
Man, that doesn't sound like any beer I used to drink.
I grew up on Mickey Big Mouths.
That seems like a lot of ingredients/flavor for a beer. But then I've only ever drank cheap beer
Shall we start gathering the search parties now then?
Have you guys had barley wine? Its like a very strong beer, usually bitter. I just had a new-ish one from the liqour megastore an hour north, good stuff
Shall we start gathering the search parties now then?
Best bet is to call in the dogs, they'll be pulling pieces of me outta the woods all night lol
Got my tubes!
And Bert gets some IPA .... whatever that is ....
Cyclin - you lost me at "strong beer" and "bitter" .....
And Bert gets some IPA .... whatever that is ....
Cyclin - you lost me at "strong beer" and "bitter" .....
India Pale AleGot my tubes!
And Bert gets some IPA .... whatever that is ....
Bomb.com (Thanks for making me feel like a jerk! I only gave him a craft brew 
)Took a half hour but I finally got the Mrs to understand trolling.. well at least the practical application part
I would love to pre order a couple tubes, but I do not have the dang thing yet. Any know about this:http://www.e-cigarette-forum.com/fo...ebuildable-atomizer-full-specs-photos-46.html ? Any ideas Blu? Kami? Cyclin? Anyone?
Sorry Hz ... a 3mm OD tube ain't gonna work for ya unless you just want it on the wick, above your top-plate ..... then it just how tall you make your wick.
*constructed out 303 stainless steel
*2.5 mm wick hole , single wick design if everyone would prefer a dual coil option i will add it
*airhole is 1/16 in , open draw is my preference but if you like a tighter draw i can alter that , let me know ,
*top cap is very secure no worries of popping off in your pocket
*adjustable contact post at the connecter so you can make it flush on your apv of choice
*capacity is 2ml
*diameter is 3/4 in. , length is 2 in. from bottom of connector to the top of the cap
*510 connection is machined to the body of the atomizer
*constructed out 303 stainless steel
*2.5 mm wick hole , single wick design if everyone would prefer a dual coil option i will add it
*airhole is 1/16 in , open draw is my preference but if you like a tighter draw i can alter that , let me know ,
*top cap is very secure no worries of popping off in your pocket
*adjustable contact post at the connecter so you can make it flush on your apv of choice
*capacity is 2ml
*diameter is 3/4 in. , length is 2 in. from bottom of connector to the top of the cap
*510 connection is machined to the body of the atomizer
Sorry I don't have that one
You need to keep in mind tho that there are two ways of using the glass tubes. You can either have a small tube (7-13mm) that only covers the wick where the copil touches, leaving the wick in tank bare. Or the second option is to have a tube long enough for the entire wick, down into the tank, though you will most likely need to drill out your wick hole wider, to fit the 3mm diameter glass tubing.
Hope that helps
SOL is me-waaaaaaaaaaaaaaaaawaaaaaaaaaaaaaaaa. LOL. No beer for Bert-gonna have to have a water bud-sorry
Thanks Blu and Cyclin!
Thanks Blu and Cyclin!
SOL is me-waaaaaaaaaaaaaaaaawaaaaaaaaaaaaaaaa. LOL. No beer for Bert-gonna have to have a water bud-sorry
Thanks Blu and Cyclin!
You can do it like Cyclin said, and just have the wick above the top-plate in the tube .... a lot of folks are doing that.
Then you'd need maybe 5mm?
Yup that's what I am doing so i do not have to drill out an atty.
I am going to use 11mm or 12mm on those I think I may need to get a long one too though cause i just remember I have one extra iHy innard.
Awww feel better damselle
Some warmed honey brandy helped a little. Will be in bed soon.....thanks cyclin!
Hey Bert I got LOTSA beer, maybe I share
Sharing is caring! I assume this means a trip to TN is in order?
- Status
Similar threads
