Ask Mr Krispy

[Krispers]

Well after someone locked my thread, I'm baaaaaaack!

Ask me anything at all and if I don't know answer I will try my best to find.

(And no turtle I dont know why your right one is hiding nor will I help)

 

[dchemist]

Alright, I'll bite. What regulated mod should I buy?

 

[Krispers]

I've had quite a few, each one I've fell in love with more than the previous. I must say I haven't enjoyed much Vaping since my dna30 died last week. Nothing comes close, I'm back to using vtr and I like but love Orbitz. Will buy another as soon as danno gets black in or blue.

 

[dchemist]

I'm really liking the VaporShark DNA series but am torn if I'll be happy with the DNA30 or if I should buy the DNA40. I have a feeler out to a vendor here in Melbourne about a DNA40 but it doesn't look like they'll have them in before I head back to the states.

 

[Krispers]

My honest opinion dna30 is enough for anyone

 

[dchemist]

Thanks might save a few bucks and go with the 30. I could always upgrade later for a fee.

 

[Krispers]

The main reason for dna60 is cloud chasing and please my opinion only, cloud chasing is stupid which leads to more risk that leads to more FDA heat. We didn't get those clouds from cigs so we should strive more to safe not just something to show off. Again just my opinion

 

[rdsok]

The only issue I have against the DNA 30 board is that it doesn't allow less than 7w or 4v and there are many vapors that prefer the lower output. The DNA 40D board address's that and adds the temperature option as well. I do vape at higher power settings... but I'd like to see a lower end board ( 40w or whatever ) that provided both a buck and boost circuit. I suspect making a lower wattage output board wouldn't be much of a cost savings though over the manufacturing cost that the DNA 40 has... so I don't know if we'd see much of a cost savings if lower power boards were produced.

My main mod is now a Vaporshark DNA 30 and I have been enjoying it a lot. I've also got a A-Mod ZNA clone as well as a Kangside Vamo 30w which I also like but they are a bit heavy to be carrying them... so one is left at home and one at work as backup to the Vaporshark. I almost purchased one of the iSticks as an inexpensive one to leave in the car... but them having PWM using vAVG as apposed to vRMS was something I couldn't get past.

 

[Krispers]

Heya rd been a while! The Orbitz lets me vape at 3.7, not regulated but yeah

 

[dchemist]

I almost purchased one of the iSticks as an inexpensive one to leave in the car... but them having PWM using vAVG as apposed to vRMS was something I couldn't get past.

And why is that? Can you tell a difference? I've not considered the iStick but mainly because of power limitation. Is it just because it's not as accurate?

 

[rdsok]

And why is that? Can you tell a difference? I've not considered the iStick but mainly because of power limitation. Is it just because it's not as accurate?

Yes I can tell the difference between a pure DC output and PWM... and using vAVG instead of vRMS means that at the lower settings, the output feels off more ( higher power ) from what a pure DC would feel like which comes back to a user being able to set the device at a lower output if they so desired.

The difference between a pure DC vs the more accurate PWM vRMS ( instead of the PWM vAVG ) is in how high you can turn the power up before the juice starts to taste burnt AND the vapor somehow "feels" smoother ( probably from the frequency the pulses are at ). On my ADV, I vape at 6.5-7w using PWM and with a pure DC output I'm vaping the same juice at 10.5w or a little higher. It was the first couple of things I noticed right off when I moved from my PWM mod's over to the DNA types.

 

[rdsok]

Heya rd been a while! The Orbitz lets me vape at 3.7, not regulated but yeah

Howdy Krispers... I've been around ( about like you I suppose )... just don't post much in the contest thread... and there aren't a lot of techy questions happening much... Sort of the down side of being an introvert I guess, not big on the chit chat but like something that makes me think a bit... And as for joking around... like you and turt... mine tend to the dry side which often gets misunderstood... so I try to save those types of responses for when it's really obvious that I'm not being serious ( and often still get misunderstood )

 

[dchemist]

Yes I can tell the difference between a pure DC output and PWM... and using vAVG instead of vRMS means that at the lower settings, the output feels off more ( higher power ) from what a pure DC would feel like which comes back to a user being able to set the device at a lower output if they so desired.

The difference between a pure DC vs the more accurate PWM vRMS ( instead of the PWM vAVG ) is in how high you can turn the power up before the juice starts to taste burnt AND the vapor somehow "feels" smoother ( probably from the frequency the pulses are at ). On my ADV, I vape at 6.5-7w using PWM and with a pure DC output I'm vaping the same juice at 10.5w or a little higher. It was the first couple of things I noticed right off when I moved from my PWM mod's over to the DNA types.

Excellent! You just taught this old dog a new trick! Now I'm off to study with my new found knowledge so I can truly be dangerous. Thanks for taking my neurons!!!

 

[VapingTurtle]

Krispy's favorite regulated mod is really a Provari used with flat top batteries.

 

[Norrin]

Do I need another mod?

 

[woody55]

Norrin, that is a good question. Let me ask this.....Does what you use now fit your needs? If the answer is "yes", then no you don't need a new mod. But....sometimes the want exceeds the need and then you must feed the want!!!!

 

[dannoman]

I would like to know what makes you such a kind efficacious personality and how you haven't been taken off the market yet??

 

[Norrin]

Totally pointless question coming up.
Why can't I load page 2 of this thread? Seen others having similar probs on other threads. You can wait till page 3 to answer then I might see it.

 

[Krispers]

I would like to know what makes you such a kind efficacious personality and how you haven't been taken off the market yet??

The answer to that question is, your already married

 

[Krispers]

Totally pointless question coming up.
Why can't I load page 2 of this thread? Seen others having similar probs on other threads. You can wait till page 3 to answer then I might see it.

Clear your browser cache and if that don't work try a different browser other than Firefox