Finally an Awesome Asmodus Family Pinky Picture
View attachment 856481
Sorry for the delay but the Luna wasn't too happy about getting dressed up in pink for @AngeNZ and has been a bit of a pain
That's all the pink your getting from my Asmodusi for now but I may have a change of heart and get a pink mod(maybe)
I'd probably pay the extra 8 bucks and go the SS. Overall the FT deal probably works best for me cause I've got a few other odds and sods in my cart there.
Thanks to @AngeNZ, I picked up a $20 special over the weekend. Got it yesterday. It's replacing my ADV Primo SE that got stolen on Thanksgiving. I'm liking it. Got the TCR dialed in for the Aromamizer and it vapes every bit as good, if not better than my other mods. Kinda miss the ArcticFox firmware (poor man's DNA) but it's all good. No problems with batts. The HG2s and 30Qs go in and out just fine. I'm a black/grey/SS/silver kinda guy. So I wasn't sure I was gonna like the green but I really do. 
Since this thread seems to love the vapeporn, I'll start with a mediocre pic...
I'm still waiting on my Colossal. With my Lunas I did find that on the 510 positive pin it has what looks like a silicone coating. Not sure if this is just my xp, or if this is a common manufacturing byproduct. I just stored my unused Lunas, or I would post a pic of what Im referring to. Maybe tomorrow I'll dig them out and take a pic if you are interested?Hey folks. Got through all 116+ pages of the thread. Thanks for the entertainment, colossal butts and all.
View attachment 856595
Now a couple of questions...
Have you noticed the Colossal being picky with the attys it likes? It doesn't see my two ADVs (Lemo 2s) or my Subtank Mini. It just gives me the "check atomizer" message. Yet my DNA30 and 30w iStick see them just fine, as did the Primo. It sees and fires my Aromamizer, Erlk and Velocity great. So I'm going to rebuild everything over the weekend, hoping that solves the issue. The builds aren't wild; 8-wrap, single/spaced coil, 26g SS316 @ 0.7Ω. It's just weird.
The mod came with an asMODus Ohmie and a bunch of coil heads. I'm not much of a clearomizer/sub-ohm tank vaper anymore, unless a tank has an RBA head/deck option. I know it uses the very common Baby Beast-style heads. Does anyone know if the Baby Beast RBA actually works in the Ohmie? I realize the RBA kit comes with an extended glass section for the 22mm Baby Beast (to make up for the RBA's taller height) and the Ohmie is 24 mm. So that's an issue. Does anyone know of an RBA head that definitely works in the Ohmie? If there is none, I can probably sell it and the extra coils for maybe half of what I paid for the kit. ¯\_(ツ)_/¯
Thanks!
Now back to the beautiful stabwood vapeporn...
Hey folks. Got through all 116+ pages of the thread. Thanks for the entertainment, colossal butts and all.
View attachment 856595
Now a couple of questions...
Have you noticed the Colossal being picky with the attys it likes? It doesn't see my two ADVs (Lemo 2s) or my Subtank Mini. It just gives me the "check atomizer" message. Yet my DNA30 and 30w iStick see them just fine, as did the Primo. It sees and fires my Aromamizer, Erlk and Velocity great. So I'm going to rebuild everything over the weekend, hoping that solves the issue. The builds aren't wild; 8-wrap, single/spaced coil, 26g SS316 @ 0.7Ω. It's just weird.
The mod came with an asMODus Ohmie and a bunch of coil heads. I'm not much of a clearomizer/sub-ohm tank vaper anymore, unless a tank has an RBA head/deck option. I know it uses the very common Baby Beast-style heads. Does anyone know if the Baby Beast RBA actually works in the Ohmie? I realize the RBA kit comes with an extended glass section for the 22mm Baby Beast (to make up for the RBA's taller height) and the Ohmie is 24 mm. So that's an issue. Does anyone know of an RBA head that definitely works in the Ohmie? If there is none, I can probably sell it and the extra coils for maybe half of what I paid for the kit. ¯\_(ツ)_/¯
Thanks!
Now back to the beautiful stabwood vapeporn...
Hey folks. Got through all 116+ pages of the thread. Thanks for the entertainment, colossal butts and all.
View attachment 856595
Now a couple of questions...
Have you noticed the Colossal being picky with the attys it likes? It doesn't see my two ADVs (Lemo 2s) or my Subtank Mini. It just gives me the "check atomizer" message. Yet my DNA30 and 30w iStick see them just fine, as did the Primo. It sees and fires my Aromamizer, Erlk and Velocity great. So I'm going to rebuild everything over the weekend, hoping that solves the issue. The builds aren't wild; 8-wrap, single/spaced coil, 26g SS316 @ 0.7Ω. It's just weird.
The mod came with an asMODus Ohmie and a bunch of coil heads. I'm not much of a clearomizer/sub-ohm tank vaper anymore, unless a tank has an RBA head/deck option. I know it uses the very common Baby Beast-style heads. Does anyone know if the Baby Beast RBA actually works in the Ohmie? I realize the RBA kit comes with an extended glass section for the 22mm Baby Beast (to make up for the RBA's taller height) and the Ohmie is 24 mm. So that's an issue. Does anyone know of an RBA head that definitely works in the Ohmie? If there is none, I can probably sell it and the extra coils for maybe half of what I paid for the kit. ¯\_(ツ)_/¯
Thanks!
Now back to the beautiful stabwood vapeporn...
That is a handsome combination fer sure.
Hey folks. Got through all 116+ pages of the thread. Thanks for the entertainment, colossal butts and all.
View attachment 856595
Now a couple of questions...
Have you noticed the Colossal being picky with the attys it likes? It doesn't see my two ADVs (Lemo 2s) or my Subtank Mini. It just gives me the "check atomizer" message. Yet my DNA30 and 30w iStick see them just fine, as did the Primo. It sees and fires my Aromamizer, Erlk and Velocity great. So I'm going to rebuild everything over the weekend, hoping that solves the issue. The builds aren't wild; 8-wrap, single/spaced coil, 26g SS316 @ 0.7Ω. It's just weird.
The mod came with an asMODus Ohmie and a bunch of coil heads. I'm not much of a clearomizer/sub-ohm tank vaper anymore, unless a tank has an RBA head/deck option. I know it uses the very common Baby Beast-style heads. Does anyone know if the Baby Beast RBA actually works in the Ohmie? I realize the RBA kit comes with an extended glass section for the 22mm Baby Beast (to make up for the RBA's taller height) and the Ohmie is 24 mm. So that's an issue. Does anyone know of an RBA head that definitely works in the Ohmie? If there is none, I can probably sell it and the extra coils for maybe half of what I paid for the kit. ¯\_(ツ)_/¯
Thanks!
Now back to the beautiful stabwood vapeporn...
and every pic is welcome here, especially pics of Colossals 
Luna compatible bottles:
I have a stunning bright pink/red bottle from FT that I tried in a Luna today. Fits perfectly.. The softness is similar to the Luna bottles too. But it is very very bright
$2.37 Replacement Bottom Feeder Bottle for BF Squonk Mod - 8ml / silicone at FastTech - Worldwide Free Shipping
This link is for the white one, but any in this range should fit
