Aspire Cleito 120 Issues.

Status
Not open for further replies.

69-Coupe

Full Member
Jul 26, 2018
11
13
I bit the bullet and bought a new Aspire Cleito 120 tank. I am feeling like I just wasted my money. This thing does not work for me. I filled and primed it. Took about 4 drags. Not near as much vape as one would expect from a sub-ohm tank like this. On the 5th drag nothing. No vape but it got really hot. I took it all apart cleaned it and re primed it. again the same thing. I then replaced the coil and tried it again. This time it worked for about 6 Drags then nothing. I unscrewed the top and put it back on. Wow it worked for another 4 to 6 drags then nothing again. I am using it on a 60 watt mod that is good for down to 0.05 Ohms. Turn up the wattage does not make any difference. I put it on a friends Smok Stick V8 and it produced a little better vape then the Smok stick died. I mean Dead. Now the light flashes 5 times any time you hit the button even with the original tank on it. I put the smok stick V8 tank on my mod and it works good. I am pretty sure the Cleito fried the Smok Stick. My mod show the coil resistance and it is what it should be. What else to try? Or is it just time to try to return it.
 

Izan

Vaping Master
ECF Veteran
Jul 1, 2012
8,852
15,685
Mallorca, Spain
Hi,
Sounds like a bit of vapor lock.
What battery device are you using?
What wattage settings did you use?
Are you using the .16Ω coil?
What juice are you using? What is the VG content? 80%? More?
Have you tried it on a proper two battery device yet? ( for wattage over 75w)
If you want to vape below 80-130 watts, the standard Cleito is, IMO, a better choice.

Watch a few Youtube videos and mimic the draw strength and wattage observed.

Cheers
I
 

69-Coupe

Full Member
Jul 26, 2018
11
13
eleaf istick melo 60 watt Tried from 30 to 60 watts. I only comes with the .16 ohm coils. VG is 70%, I don't have access to a two battery device, I watched several videos and people were getting way more vape with setting at 30 watts than I get at 60 watts. It works a lot better after letting it sit overnight. Maybe I just needed to let it soak up the juice for longer. I just took 10 drags off of it and it worked pretty good.
 
  • Like
Reactions: Izan
Status
Not open for further replies.

Users who are viewing this thread