Hi All. I just got the nautilus and when I try to open it, I feel like I'm going to break the glass in my hand. I even tried using one of those rubber grip things to try and open it. Anybody else having a problem with this? Anyone have any tricks or tips to open it any easier. Thanks in advance.
Aspire Nautilus question
- Thread starter gr8v
- Start date
- th_trl_thread_readers 0
- Status
It worried me at first too, but pyrex is actually quite tough (so long as it's genuine), but not up to bullying. If you're really worried you could always get a stainless steel tank for it 
So long as you don't try to tighten it too hard, you should be all right. Agreeing with Ripshod--you can always go with the Stainless steel tank (they look pretty good).
I don't have a Nautilus, but when I can't get one of my others open, I use a large rubber band around the closest metal part and turn that off of the glass. You could probably use rubber dish gloves too.
When I put things back together, I put a little nic liquid on the threads, to help grease things up for the next time I take things apart. Not sure if that's supposed to work, but my brain tells me it helps.
When I put things back together, I put a little nic liquid on the threads, to help grease things up for the next time I take things apart. Not sure if that's supposed to work, but my brain tells me it helps.
When it is new and the bottom silicone seal is new yes it can be difficult to get the glass off. After a few times taking it apart and putting it back together it get easier.
Also on the FAKE Nautilus units the glass is thicker than on the real units. That glass is thicker on the Inside, outside dimensions are the same. So it grabs that bottom seal tighter making it harder to get off and put back on.
Also on the FAKE Nautilus units the glass is thicker than on the real units. That glass is thicker on the Inside, outside dimensions are the same. So it grabs that bottom seal tighter making it harder to get off and put back on.
Had same issue bud. Break it open once from the bottom holding the top and its the only time it's difficult from there on.
Sent from phone.
Sent from phone.
Do any of you have a problem with atomizer staying in the tube when you take it apart?
Tim
Tim
I've had that happen once or twice--doesn't seem to be a big deal. Just make sure you've got that coil screwed in tight in the base, and you'll be OK>
I hope your only joking about using WD40. The threading on a Nautilus is internal, which means your juice would be mixing with the WD40. I would not want to even know what that would taste like let alone all the health concerns of vaping even trace amounts of WD40.
Quick tip from me, if the base seems stuck. Try tightening the top a little. Because of the threading only a small movement of the top and it'll release the base slightly. And then be careful putting it back together, but I'm sure you know this now.
Got the stainless steel tank with an extra glass tank in case I would like to switch. I only use the steel as I'm afraid of breaking the glass, the steel one feels very solid so try to get your hands on one of them
They are sortof tight when new. I have ss on both of mine and they work great. Once it gets used some you won't have as
much trouble. The seals work wonderful and I have yet had any leaking
Sent from my iPhone using Tapatalk
Mommabird62
much trouble. The seals work wonderful and I have yet had any leaking
Sent from my iPhone using Tapatalk
Mommabird62
- Status
Similar threads
- Locked
