Atlantis v2 and ipv D2

[Ben Tran]

Hi vapers,

Recently I purchased my Atlantis v2 after shattering my v1. The tank is awesome but I'm struggling to find the right wattage configurations to use. I'm using the same 0.5ohm replacement coils that I used with my v1 however, I noticed that now my coil is starting to burn and my juice is turning orange. I was vaping previously between 28-33 watts with the same coils. Now with the Atlantis v2, I'm dropping my wattage to 18 watts to prevent the burning Surprisingly, the vape hits a lot nicer now. Has anyone experienced this? Thanks in advance!

-Ben

 

[OlderNDirt]

I am still using 3 Atlantis v1's on the D2 as well as 3 other mods and have found myself dropping the wattage down as well, although I haven't gone down to 18 watts yet. Mostly from 32W to 28W, but don't stay on one tanks for more then a couple hours. Been wondering myself if there has been a change in the coils.

ETA: Almost forgot - Welcome to ECF

 

[Ben Tran]

Thanks for the input OlderNDirt! Yea that's something I've been meaning to do. Buy more backup tanks in case one gets too hot!

I have a feeling it might be the coils since they worked perfectly fine on the v1. But in theory, this shouldn't be the case if both tanks are compatible with the same coils and the d2 is not affected.

 

[OlderNDirt]

I must have had a senior moment when I thought you mentioned using the IPV D2, must have been on the previous thread I read. Having more then one tank works nicely should you want to change flavors frequently. I rotate 10 tanks and a dripper and will normally change tanks/flavor 5 or more times a day, but that's just me. Not sure what mod you are using, but if you have some flexibility with it, I would suggest getting something different for that second tank and see if there is something there you like better. And again, just my opinion, but there are flavors I really like in the Atlantis that just don't work as well in one of my TFV4's or others. That's why I am still using the Atlantis tanks.

 

[Ben Tran]

Having extra tanks for different juices is a good way to go as well. Will definitely test out other tanks and mods. Thanks!

 

[aceman3330]

I must have had a senior moment when I thought you mentioned using the IPV D2, must have been on the previous thread I read. Having more then one tank works nicely should you want to change flavors frequently. I rotate 10 tanks and a dripper and will normally change tanks/flavor 5 or more times a day, but that's just me. Not sure what mod you are using, but if you have some flexibility with it, I would suggest getting something different for that second tank and see if there is something there you like better. And again, just my opinion, but there are flavors I really like in the Atlantis that just don't work as well in one of my TFV4's or others. That's why I am still using the Atlantis tanks.

D2 is in his heading/title
Is this tank good?


Sent from my iPad using Tapatalk

 

[crxess]

.5ohm 18Watts

You Must switch to TC/NI mode, set to 18J and Temp to max.
Set(lock) Resistance
D2 Will operate at 18 watts without controlling temperature.

D2 will not step down far enough in VW Mode.

Good luck

 

[Frenchfry1942]

I have to have extra tanks, too. I switch a lot, either for loss of flavor or boredom. To many flavors to not enjoy switching around.

 

[OlderNDirt]

D2 is in his heading/title
Is this tank good?


Sent from my iPad using Tapatalk

DOH! Sucks when you are wrong when you just think you are wrong!

.5ohm 18Watts

You Must switch to TC/NI mode, set to 18J and Temp to max.
Set(lock) Resistance
D2 Will operate at 18 watts without controlling temperature.

D2 will not step down far enough in VW Mode.

Good luck

Thanks for that info. Stumbled on that other thread after posting here and looking forward to trying that although I mostly use the D2 with a Ni200 setup.

 

[Ben Tran]

.5ohm 18Watts

You Must switch to TC/NI mode, set to 18J and Temp to max.
Set(lock) Resistance
D2 Will operate at 18 watts without controlling temperature.

Thanks for the advice!
So I switched it to 18.0J, 300C, and Ni200. I'm getting a "No Liquid!" response on the D2 :/

 

[ufosnowcat]

may wife puts 24W on the .5 coils for me thats way to low

funny thing about the .5 coils if you dissasemble them the coil seems to be made of 2 different wires, the center part of the coil sees welded in between and that is the only part of the coil that gunks up