Atom in the UFS

[lordbyron77]

Please, can you list the type of 510 atom which you use without problems in your UFS? (Ikenvape/SLB/Cisco/Joye/TW/etc etc)
You can also list the ones that give you problems, if you have any problems

Tnx

 

[stv888]

dont used EM atomizers!
Joy or BOGE ( personal view ).

 

[ggero]

Why not EM stv ? .. I have some of EM and they are vaping good inside UFS

 

[Moshmarr]

I've only used Ikenvape 510s so far on the UFS, LR and HV, and they work perfectly- great draw and flavor, no problems getting enough liquid flow.
I have liked the EM ones in the past, but haven't tried for awhile...

 

[Bigbuyer]

I use my real Joye LR's and regs in the UFS.

 

[namle]

I use iken HV510 with no problems

 

[Smokin_Alex]

the only ones i can use without problems till now are some NR used at 6V (from an italian seller, he called them Yc510, but i do not mind from where them come in, maybe dse) and some DSE510 LR (1,7 ohm) used at 3,7V

 

[Giulio]

I use 510 LR 1,5 ohm no brand by vapor flow. Excellent, they work without problems.

 

[tintal]

Cisco 1.5 works just fine.

 

[B-Rad_The_Mad_Vapr]

I'm using Bruce's(COV) joy HV 5ohm

 

[lordbyron77]

Thanks, I am collecting also your records in this 3D on the Italian Forum

Esigarettaportal.it - Sigaretta Elettronica Forum Italia

 

[cypresss]

Ikenvape HV @ 6V - Perfect. Can regulate the draw from tight to airy
EM LR 1.5 @ 3.7 - Work pretty well after the first day. Draw is average/tight even with CR fully open.

 

[iggyLover]

Cisco 306 2.o with 510 atty sleeve. Works fantastic/no problems. 3 weeks on this atty and still going like day one

 

[lordbyron77]

Cisco 306 2.o with 510 atty sleeve. Works fantastic/no problems. 3 weeks on this atty and still going like day one

Hello, your information is very interesting, is the first time I read someone using Cisco 306 in UFS.
Please, can you explain step-by-step (in simple English ) how to make them work properly

 

[B-Rad_The_Mad_Vapr]

I thought Cappy said you can use a 306 in there with this 306 to 510 Drip Tip Adapter - Avid Vaper

But keep note that the 306 is narrower than a 510 so when closing the liquid, it wont stop at the top like the 510, it will go farther and you need to stop by feel. It still closes the liquid though

 

[iggyLover]

Hello, your information is very interesting, is the first time I read someone using Cisco 306 in UFS.
Please, can you explain step-by-step (in simple English ) how to make them work properly

Yes lordbyron, all you need to do is take an old 510 atty-remove connection and everything inside-now you should have a tube you can see straight through- now you take your 306 mouthpiece (the one that comes with it) and cut a small section off and slid this on to your 306 atty- then place 510 tube on your 306. There you have it
Your 306 should now look like a 510 I hope that was clear

 

[lordbyron77]

Yes lordbyron, all you need to do is take an old 510 atty-remove connection and everything inside-now you should have a tube you can see straight through- now you take your 306 mouthpiece (the one that comes with it) and cut a small section off and slid this on to your 306 atty- then place 510 tube on your 306. There you have it
Your 306 should now look like a 510 I hope that was clear

Thank you very much!

 

[lordbyron77]

I verified that 20% of the atoms have holes that don't coincide with the UFS atomizer connector. I suggest you to put an o-ring or Teflon to place between atom and connector to lift the threads of the atom.
Alternatively you can use sandpaper on the atom, to change the height of the atom threads

 

[baddao]

That's true, today i verified the same problem with many atoms, that's the reason why some atoms (same brand ) works better than other.

 

[imeothanasis]

Its not the holes but the air that pass via atoms guys. Some of them have a tight inhale. The solution is to close more the CR. To my opinion there is no atomizer that cant work inside UFS if you adjust air or liquid.