I thought it would be a neat little idea to pass on some information to new comers and veterans alike by making a little tid bit of useful information on the store. If there's any tips or suggestions just give a shout and we'll hang up to the list!
The List can be viewed from here or Atomizer and Cartomizer Fun Facts
Atomizer and Cartomizer Fun Facts
Fun Facts:
1.If youre getting liquid into your mouth the chances are that your either adding too much liquid or your atomizer may not be operating properly.
2. A Volt meter is the Best tool to use in vaping.
3. Premium 510 Cartomizers both Hard and Soft tip take approximately 20 drops for a full fill.
4. The only difference between Hard tip and Soft tip Cartomizers are the inserts at the top of the unit.
5. If you want to change flavors when using the same Atomizer , without mixing them together. Try adding 2-3 drops of straight VG and vape it to clear out the previous flavor.
6. Using a 3.5Ω Atomizer is the best combination for 6V.
7. It can take approximately 6-10 hours to properly break-in an atomizer.
8. Using 6 volts on an atomizer that is rated under 3.0Ω can reduce the atomizers run time.
9. A 901 Atomizer, fits itself right in between a 510 and an 801 focusing on Actual feel (Throat hit) and Flavor.
10. You can use a 510 or 901 cartridge on a KR-808D-1 or 510 Cartomizer.
11. You also use a Drip tip on a Cartomizer.
12. Depending on your liquid, 5-6 volts will either enhance or mutate your flavor.
13. If you ever are experiencing a burning taste, check your device for any excess liquid or build-up. A dirty connection can cause a harsh taste.
14. An 801 Atomizer is geared towards Flavor and Vapor production.
15. Only Preform Atomizer maintenance if absolutely necessary.
16. Using 5-6V is known to reduce the users cravings.
17. A Volt meter can tell you if the Atomizer or Cartomizer is truly inoperable.
18. There are many different ways to perform maintenance on an Atomizer or Cartomizer. If your ever stuck, try YouTube.
19. Using a 1.5Ω will drastically reduce your batterys run time.
20. Air flow plays a key role in vapor production.
21. A 510 atomizer is geared towards Actual feeling (Throat hit) and Vapor production.
For Drippers:
22. 901-510 Atomizer: Add 3-4 drops of liquid down the inner walls of the atomizer per vaping session.
23. 801 Atomizer: Add 4-6 drops of liquid down the inner walls of the atomizer per vaping session.
The List can be viewed from here or Atomizer and Cartomizer Fun Facts
Atomizer and Cartomizer Fun Facts
Fun Facts:
1.If youre getting liquid into your mouth the chances are that your either adding too much liquid or your atomizer may not be operating properly.
2. A Volt meter is the Best tool to use in vaping.
3. Premium 510 Cartomizers both Hard and Soft tip take approximately 20 drops for a full fill.
4. The only difference between Hard tip and Soft tip Cartomizers are the inserts at the top of the unit.
5. If you want to change flavors when using the same Atomizer , without mixing them together. Try adding 2-3 drops of straight VG and vape it to clear out the previous flavor.
6. Using a 3.5Ω Atomizer is the best combination for 6V.
7. It can take approximately 6-10 hours to properly break-in an atomizer.
8. Using 6 volts on an atomizer that is rated under 3.0Ω can reduce the atomizers run time.
9. A 901 Atomizer, fits itself right in between a 510 and an 801 focusing on Actual feel (Throat hit) and Flavor.
10. You can use a 510 or 901 cartridge on a KR-808D-1 or 510 Cartomizer.
11. You also use a Drip tip on a Cartomizer.
12. Depending on your liquid, 5-6 volts will either enhance or mutate your flavor.
13. If you ever are experiencing a burning taste, check your device for any excess liquid or build-up. A dirty connection can cause a harsh taste.
14. An 801 Atomizer is geared towards Flavor and Vapor production.
15. Only Preform Atomizer maintenance if absolutely necessary.
16. Using 5-6V is known to reduce the users cravings.
17. A Volt meter can tell you if the Atomizer or Cartomizer is truly inoperable.
18. There are many different ways to perform maintenance on an Atomizer or Cartomizer. If your ever stuck, try YouTube.
19. Using a 1.5Ω will drastically reduce your batterys run time.
20. Air flow plays a key role in vapor production.
21. A 510 atomizer is geared towards Actual feeling (Throat hit) and Vapor production.
For Drippers:
22. 901-510 Atomizer: Add 3-4 drops of liquid down the inner walls of the atomizer per vaping session.
23. 801 Atomizer: Add 4-6 drops of liquid down the inner walls of the atomizer per vaping session.
