Atomizer for Kanger TS3 - is it compatible with evod heads?

[being11]

Hello
hoping someone can answer this question -
I have over a dozen Kanger Evod atomizer heads and want to know if they can be used in a Kanger TS3?

thanks for any help!!

 

[SupplyDaddy]

You shouldn't have a problem. If you feel the need, you can take the longer T3S stem and put it on the shorter evod coil.

 

[crxess]

According to kanger they are different.
I believe the flange under the wick is a different diameter.

T3s, MT3s - Upgraded T3(x) use one
Evod,Protank, Protank2 use another

 

[being11]

even with the different diameter flange, would they not fit?

 

[State O' Flux]

OK, following crxess' comments. Based on my samples available, which are 4 T3Ss and two 5-packs of spare PT/EVOD replacement coil heads... A Protank/EVOD coil head will screw into a T3S base, but, because of the larger (10mm vs 9mm) head base plate, it will not screw into the 9.35mm inside diameter of the T3/T3S clearo body. So, there ya' go.

 

[Bill's Magic Vapor]

No problem. Use the evod coil with the T3 post and they are identical in form and function.

 

[glowplug]

I have not been able to use my EVOD heads in my MT3S tanks. They fit the base but don't screw in correctly. After reading the post by State o' Flux (love the name!) I now understand why. Thank you. I thought it was just me and I was doing something wrong. I also find that my Pro tank tends to flood more quickly with the evod head. However, I like the draw better so I just keep it pretty full all the time.

 

[State O' Flux]

I have not been able to use my EVOD heads in my MT3S tanks. They fit the base but don't screw in correctly. After reading the post by State o' Flux (love the name!) I now understand why. Thank you. I thought it was just me and I was doing something wrong. I also find that my Pro Tank tends to flood more quickly with the evod head. However, I like the draw better so I just keep it pretty full all the time.

Glad you like the name... it describes my mental state - full of flux.

You won't have to worry much longer about EVOD coil heads as I'm guessing they'll be drying up fairly quickly... as Protank/EVOD heads take over vendor inventories.

 

[release the kraken]

Yeah I really like the new one size fits all for evod and protank. IMO it's a vast improvement for the evod.

 

[Eddie S]

My store only sells pro heads for both the pro tank AND the EVOD. However, they are not compatible with the TS3.

 

[being11]

ok. thanks for all the info. so it sounds like its best to use the evod atomizer, but screw on the TS3 post to get it to fit properly.
i hope they release a "standardized" system soon.....