I just started getting into dripping. Just curious what there is out there as far as atomizers, dripping accesories, what you use, ect. So heres what I propose. Tell me what your favorite atomizer is, why, how much it cost, where you got it, and what you use with it (drip tips/shields/ect.) It would be greatly appretiated. Currently I'm using a madvapes 2.5 Bauway. (dont know if thats spelled right) Works pretty well, sometimes I get off hits, and sometimes liquid runs straight down it, but overall not bad for the 5 bucks on sale.
- Status
OK.
Let's see. I vape at 5 volts (you should probably have them include voltage too) so:
3.0 ohm genuine joye 510 atty. Drip tip or empty cart. Cignot. $8.33 (3 for $25.00).
Hits well. Lasts well. Proper ohms. It's what I've "settled on". Tried Bauway and SLB. They're OK. Stayed with Joye for the 5 v stuff. Not much leaking. Just drip 3 drops on the bridge. I don't de-wick or anything.
Let's see. I vape at 5 volts (you should probably have them include voltage too) so:
3.0 ohm genuine joye 510 atty. Drip tip or empty cart. Cignot. $8.33 (3 for $25.00).
Hits well. Lasts well. Proper ohms. It's what I've "settled on". Tried Bauway and SLB. They're OK. Stayed with Joye for the 5 v stuff. Not much leaking. Just drip 3 drops on the bridge. I don't de-wick or anything.
I use 510 stuff for everything but dripping.
There is nothing else when it comes to this than the RN4081.
There is nothing else when it comes to this than the RN4081.
I use joye 2.4 ohm and 3.0 ohm 510s, cisco 2.0 ohm 510s, cisco 1.7 ohm and 2.0 ohm 306s. The joye 510s I buy wherever I happen to be ordering other stuff and they carry them (I grab a spare atty with just about every parts order and that can be from many many places). The cisco stuff comes from avidvaper.
The 3.0 ohm 510s I use on 5.0v. Sometimes when a 2.4 ohm 510 is getting old and cleaning doesn't keep the resistance down any more, I'll run those at 5.0v until they die.
The rest of it I use at 3.7v on several different mods. I like the 306's on my short body rough stack. The RS with a 306 completely fits in my palm. It's a nice little set up. Whether I'm using 1.7 or 2.0 ohms depends on the juice.
The cisco 510 2.0 ohm finds its way on to my bottom feeder whenever I don't feel like using a carto. That's sort of juice dependent too. I have a couple of flavors that I just prefer from an atty.
prices - I'll spend anywhere from 5 or 6 bucks on sale to around 9 bucks each
The 3.0 ohm 510s I use on 5.0v. Sometimes when a 2.4 ohm 510 is getting old and cleaning doesn't keep the resistance down any more, I'll run those at 5.0v until they die.
The rest of it I use at 3.7v on several different mods. I like the 306's on my short body rough stack. The RS with a 306 completely fits in my palm. It's a nice little set up. Whether I'm using 1.7 or 2.0 ohms depends on the juice.
The cisco 510 2.0 ohm finds its way on to my bottom feeder whenever I don't feel like using a carto. That's sort of juice dependent too. I have a couple of flavors that I just prefer from an atty.
prices - I'll spend anywhere from 5 or 6 bucks on sale to around 9 bucks each
Not long back I would have answered Joye standard 510, but now I've went to the ce2 carto. I just take out the top plugs and drip away.
There's no filler to burn so they taste just like an atty.
510 CLEAROMIZER 2.4-2.6 OHM
e-power and homemade plastic drip tip.
I really like IKV attys. 510s or 306s with drip tips. I just now started using the 306s with a clear cannon tip, and I'm lovin' 'em. IKV attys last for a LONG LONG LONG time. I regurally get 2+ months of solid vaping out of each IKV atty at 8 to 10 watts, and for me they out preform everything else I've tried so far (I've tried a lot of different attys) as production and flavor is concerned. The attys cost about 8 bucks a pop.
Hmmmm...I have to think on this one.
Okay, I had to remember where I got these at. I like an off brand...honestly I don't know what brand it is and it's not posted on their site....www.cropduster901.com's standard 510 atomizers. I don't know the ohm rating...never checked it. I only use them to test flavors then they get cleaned and tucked away. I've had them for about 6 months. I've used them on my Buzz's at 4.5v and my Prodigy V3.1 at 3.7V. I like Boge and Ikenvape cartomizers the best. I don't want to wast a good carto on a flavor I may not care for so that's the only time I use an atty.
Their atomizers are $3.95 and shipping is $5. I bought 10 of them at once to offset shipping. Owner is a super nice guy and answered all of my emails within minutes of sending them. Shipping was super fast also.
Okay, I had to remember where I got these at. I like an off brand...honestly I don't know what brand it is and it's not posted on their site....www.cropduster901.com's standard 510 atomizers. I don't know the ohm rating...never checked it. I only use them to test flavors then they get cleaned and tucked away. I've had them for about 6 months. I've used them on my Buzz's at 4.5v and my Prodigy V3.1 at 3.7V. I like Boge and Ikenvape cartomizers the best. I don't want to wast a good carto on a flavor I may not care for so that's the only time I use an atty.
Their atomizers are $3.95 and shipping is $5. I bought 10 of them at once to offset shipping. Owner is a super nice guy and answered all of my emails within minutes of sending them. Shipping was super fast also.
From what I seen on this forum. These two are the most praised vendors for their atties (only ones I get mines from too):
http://www.ikenvape.com
http://www.avidvaper.com
http://www.ikenvape.com
http://www.avidvaper.com
I'm vaping on an Ikenvape 2.0 atomizer at 4-4.5 volts
I also use their HV 3.5ohm attys at 5+volts
I have some Ciscos on the way
But, the reasoning for me anyways of using atomizers like Ikenvape and Cisco, aside of their great performance and longevity, is the fact that they do not use the nasty primer. I hate that primer with such passion.
I also use their HV 3.5ohm attys at 5+volts
I have some Ciscos on the way
But, the reasoning for me anyways of using atomizers like Ikenvape and Cisco, aside of their great performance and longevity, is the fact that they do not use the nasty primer. I hate that primer with such passion.
That's actually the only reason I buy them. I haven't had any better luck as far as longevity goes with the cisco attys compared to joye 510 attys, and I don't think they produce better flavor. It's just the primer. -- I still buy joye attys and I'm good at cleaning them before first use, but sometimes when I want to break out a fresh atty, it's really nice to just spin it on and go rather than spend 20 or 25 minutes in my cleaning ritual.
I've heard that jewelry cleaners do a really good job taking the primer out, but, I've yet to try it yet.
Best dripping atomizers IMO are the BE112 and the mini-801 on a 5 volt or variable volt PV. Both low bridge, both bigger coil than any other atomizer, both about 2.8 resistence and bigger cup in the bottom. Much better, IMO than a 510 due to the better coil and larger size.
- Status
Similar threads
