Atty getting too hot.

[Saviorself]

I recently did the dry burn method to clean my atty and now it burns way too hot to the point I get a really harsh throat hit. I then noticed my cartridge was melted. Any help to make the atty not to get so hot?

 

[classwife]

Your atty is dry...pull out the cartridge and put 2 drops of liquid on it...If you are chain vaping, the filler is not being given time to "wick" the liquid down to the atty.
Check the filler...it should look almost "slushy"....
Occasionally the carts will be a little long...you can trim it a tiny bit....but it really sounds like you are just hitting it too much .

 

[Sugar_and_Spice]

Hi,
First stop hitting it so hard...lol....what type of batt and atty? Do you have more than one? Try the cartomizers, the carts can be a pita to keep filling....
If you have some straight pg or vg, put some drops in and let soak for a minute or two, then blow out...that may help, but you need to not let it get so hot that it melts anything....

 

[Saviorself]

I forgot I also debridged my atty if that is any help. Okay I'll update you on my situation.

 

[Saviorself]

Hi,
First stop hitting it so hard...lol....what type of batt and atty? Do you have more than one? Try the cartomizers, the carts can be a pita to keep filling....
If you have some straight pg or vg, put some drops in and let soak for a minute or two, then blow out...that may help, but you need to not let it get so hot that it melts anything....

It's a standard 510 with manual battery.

 

[Credo]

I forgot I also debridged my atty if that is any help. Okay I'll update you on my situation.

Don't use a cart with a debridged atty.......the bridge is designed to touch the cart filler and wick the right amount of liquid to the atty.

 

[Saviorself]

Okay I got the atty to not burn so hot. Thank you all for the tips