Answer to question 1 is: Kit comes with one thread cap and four adapters.
Thanks for the assist - Blu -
have you got your new adapters, --
what do you think of them,
give us a looky and a lil write up please --------
Availibity of Indulgence
- Thread starter vaporboy
- Start date
- th_trl_thread_readers 0
- Status
Thanks for the assist - Blu -
have you got your new adapters, --
what do you think of them,
give us a looky and a lil write up please --------
Answer to question 1 is: Kit comes with one thread cap and four adapters.
Thanks bluesuede! I second Di's request for a review about the 'new' or 'revised' Indulgence Kit that now apparently comes with one threaded cap and four atty adapters. In the youtube review of the Indulgence Kit posted March 12, 2010 by drjmhester he mentioned that it was a little tricky to get the atty screwed onto the adapter and that he had to hold the adapter to keep it from twisting so that he could get the atty screwed on properly. I think a pair of needle nose pliers would be the right tool for the job!
I'd post a link of the YouTube Review of Revised Indulgence Kit posted March 12, 2010 by drjmhester but I still don't have 15 posts here at ECF which would then enable me to post links so if someone interested enough to find that review and post a link or the video in this thread that would be great.
review
and assembly instructions for Indulgence ----
YouTube - Eastmall Indulgence Review with Doctor J
and assembly instructions for Indulgence ----
YouTube - Eastmall Indulgence Review with Doctor J
Last edited:
No, but only because I haven't requested them... or it, I should say. It was only the 808D-1/DPV9 adapter I had a problem with (no air). I'll mention it on my next order. Thanks, Di!
While I'm here I should like to ask what you think of the 510 vs 801 atty on the Indulgence? I've never had a 510 so I'm curious. I'm running my Indulgence exclusively with an 801 atty. HV is on my next order.
While I'm here I should like to ask what you think of the 510 vs 801 atty on the Indulgence? I've never had a 510 so I'm curious. I'm running my Indulgence exclusively with an 801 atty. HV is on my next order.
Thanks for the assist - Blu -
have you got your new adapters, --
what do you think of them,
give us a looky and a lil write up please --------
No, but only because I haven't requested them... or it, I should say. It was only the 808D-1/DPV9 adapter I had a problem with (no air). I'll mention it on my next order. Thanks, Di!
While I'm here I should like to ask what you think of the 510 vs 801 atty on the Indulgence? I've never had a 510 so I'm curious. I'm running my Indulgence exclusively with an 801 atty. HV is on my next order.
I have used the 510 on the Indulgence.
it is an excellent atty, gives very good taste of juice,
and very good vapor production.
It is a very popular atty.
I love the 801,
I am biased, been using 801 for 12 months and more,
I love 801, bigger cart means less filling topping up,
big vapor, and it is smooth, and wet, and luscious,
and good taste of course.
the 801 is large and some peeps find it a bit cumbersome,
but I looooooove it..........
have you tried the 901 on Indulgence, what do you think of that????????
Hi Zeeky. I simply put the adapter in the end cap and gently press my finger on the bottom of the adapter while screwing the atty on. Then screw the end cap on the button section after the atty is attached. Keeping your finger on the bottom of the adapter keeps it from turning.
I quit smoking in 1 week using the 801 and I will *always* be partial to it. (I had been smoking since the 60's! 
) Especially when I switched to EM's attys and it got even better. Absolutely positively the best 801 attys around, bar none! I have yet to push the little button into the hole using EM 801 bats - which is an easy thing to do with the "other" attys that has those irritating recessed buttons.
Then I got the 401/EM4 which is OK but a little wimpy unless you dip. Advantage is you can hold the auto like an analog but I found I prefer the manual bats so you can "preheat" the atty. Then came the KR808D-1 and the DPV9. These are my 2nd favorites.
Somehow I never got into the 510 and the 901 because of the smaller carts used. You get kinda spoiled with size of the 801 carts. I fit 30 drops into a new blank cart! But still curious about 510/901 but undecided as to "should I try them?" I have soooo much stuff now I've an entire file drawer jammed full to the brim. 8-o
Lastly, my Indulgence. Aw, a thing of beauty it is! I love the dang thing! Vaping at 3.7 w/o an extended cup I can go 12-14 hours on ONE bat! Now that's impressive. A question about the 801 HV atttys... Are these not recommended for 3.7 vaping and should I just continue using my reg. EM 801 attys? I find the PT especially will turn the liquid "dark" after a while (heat from 5v?) but I've been washing the filler out as you suggested and that works like a charm.
) Especially when I switched to EM's attys and it got even better. Absolutely positively the best 801 attys around, bar none! I have yet to push the little button into the hole using EM 801 bats - which is an easy thing to do with the "other" attys that has those irritating recessed buttons. Then I got the 401/EM4 which is OK but a little wimpy unless you dip. Advantage is you can hold the auto like an analog but I found I prefer the manual bats so you can "preheat" the atty. Then came the KR808D-1 and the DPV9. These are my 2nd favorites.
Somehow I never got into the 510 and the 901 because of the smaller carts used. You get kinda spoiled with size of the 801 carts. I fit 30 drops into a new blank cart!
But still curious about 510/901 but undecided as to "should I try them?" I have soooo much stuff now I've an entire file drawer jammed full to the brim. 8-oLastly, my Indulgence.
Aw, a thing of beauty it is! I love the dang thing! Vaping at 3.7 w/o an extended cup I can go 12-14 hours on ONE bat! Now that's impressive. A question about the 801 HV atttys... Are these not recommended for 3.7 vaping and should I just continue using my reg. EM 801 attys? I find the PT especially will turn the liquid "dark" after a while (heat from 5v?) but I've been washing the filler out as you suggested and that works like a charm. I have used the 510 on the Indulgence.
it is an excellent atty, gives very good taste of juice,
and very good vapor production.
It is a very popular atty.
I love the 801,
I am biased, been using 801 for 12 months and more,
I love 801, bigger cart means less filling topping up,
big vapor, and it is smooth, and wet, and luscious,
and good taste of course.
the 801 is large and some peeps find it a bit cumbersome,
but I looooooove it..........
have you tried the 901 on Indulgence, what do you think of that????????
I quit smoking in 1 week using the 801 and I will *always* be partial to it. (I had been smoking since the 60's!
I also quit smoking with the 801 atty from EastMall, it took me a whopping 4 days to quit completely.
I could not believe it. I will always love East Mall,
and the EM 801 for this.
I too have not found a better 801 atty, they are renowned as the best 801 around, and yes, I agree, the buttons are more robust.
Then I got the 401/EM4 which is OK but a little wimpy unless you dip. Advantage is you can hold the auto like an analog but I found I prefer the manual bats so you can "preheat" the atty.
I have had and tried the EM4 - (401)
I must admit, I liked it very much, and I had no probs with the cart on these, I just squirted a bit in the cart and off it went, lovely amount of vapor too.
A very nice, fine and delicate one, suitable for a night out for sure.
Then came the KR808D-1 and the DPV9. These are my 2nd favorites.
OH yes, now you are talking ------
this is -- absolutely - DA BOMB
This is the best mobile, and walk around ecig going----
it is also the very best for anyone starting out,
so easy, -- no mess, - no fuss, - just screw on the carty and vape for 3 hours, -- change carty-- and off you go again-
the very best beginning to learn to vape ecig - and the only one I recommend for beginners.
Somehow I never got into the 510 and the 901 because of the smaller carts used. You get kinda spoiled with size of the 801 carts. I fit 30 drops into a new blank cart!
I never really got into the 510 a nd or 901 --
hahahaha -- for the same reasons - the carts were too small for me,
I had been spoiled by the massive juice capacity of the 801 and could not bear to be dripping into these tiny lil things every 5 minutes.
As you rightly say, with the 801 we have a juice barrel, it takes a full 30 drops and just vapes for ever before needs refilling, I get a good 70 - 80 puffs with mine on a full cart, this is my bliss.
Lastly, my Indulgence.
aaaaah, yes, the Indulgence,
an adorable child, she was a petulant little thing when first we released her to the world, kicking up and giving a few glitches and spitting her fiery personality at us all,
but we calmed her down with a few updates, and now she is a thing of beauty and grace indeed,
With such variable options and the best value for your dollar, I think she is hard to beat.
she is the love of my life along with one other ------
she has given me a new understanding of the 901 atty also,
I have been using the 901 atty with my Indulgence, and I am thrilled to bits with this lil 901 atty, the filling does not seem to be ad hassled now,
I don't know, I just like it with the 901 now on the Indulgence, I have never liked 901 before.
maybe there is hope still for the 510 -----
I must get some and try them with Indulgence, this is one that I never bothered with cos of the small size of the cart also. A second chance is in order now ------
You're not doing anything wrong, they just get hot. Those of us that vape heavy can use two devices in rotation, giving them more time to cool down between puffs.
I agree with darrel, and sperex , they get hot, you can just about melt down a 510, and as long as you make sure it never gets a chance to get dry, each time you get that dry burn in your throat, it weakens atty, this is from my own experience so take it for what it is to you, you will have that thing for a very long time, I have one here that is 9 months from when I started with it, t is the only one I use as far as 510.
I know a lot of people say "oh dont flood it, no gurgly sounds , that is bad " well I dont subscribe to that in the slightest form . I keep all my attys just to the point that there soaking , and just gurgling, and I drip, and dont use a tampon in my PV's and unless I dry an atty out, it doesn't fail ! Of course I had a instance where I fried sevweral attys in one day, it was a voltage issue , 8.4 v will fry things fast. lol
I know a lot of people say "oh dont flood it, no gurgly sounds , that is bad " well I dont subscribe to that in the slightest form . I keep all my attys just to the point that there soaking , and just gurgling, and I drip, and dont use a tampon in my PV's and unless I dry an atty out, it doesn't fail ! Of course I had a instance where I fried sevweral attys in one day, it was a voltage issue , 8.4 v will fry things fast. lol
- Status
