Battery Problem - Please Help

[Kilroy2.0]

I have a 510 manual switch battery and the LED will not turn off and does not seam to be working. My question is - is there a way to disconnect the LED and make it work again? Has any one else had this happen and if so what is you do.

Thanks
-g

 

[CaSHMeRe]

When the LED is stuck in the *ON* position, is the atomizer tip itself hott? To test, twist an atomizer on and listen for a sizzle.

 

[Kilroy2.0]

at this point the LED has been on for a while - when I put it together nothing
I do not hear a sizzle until I suck on it but I still get no vaper.

-g

 

[GIMike]

better than my 801...i think it just died a hard death...if i can't get anybody to help me figure it out, my e-cig days are over and i'll probably just quit altogether since cigs taste so nasty now

 

[Cellmeister]

I have a 510 manual switch battery and the LED will not turn off and does not seam to be working. My question is - is there a way to disconnect the LED and make it work again? Has any one else had this happen and if so what is you do.

Thanks
-g

The LED Has Nothing to Do With It and Leave it Alone, Cuz Its Giving U Visual Indication Of Its Status.

The Problem Is That The Switch Stuck On (Probably jammed from being depressed at an angle and dislodging the proper location, easy to do on the 510) and Is Possible No Good Anymore.

U Can Try to Push The Switch In & Out & Wiggle at Angles (at the same time) The Switch To See If You Can Unjam It.

The Reason The LED Is On and no vape is the Protection / Cutout Circut Is Activated Preventing Power Going To The Atom.' And This Has Happened to Me and I Fixed it.

Hope That Helps!

~Keep Vapin~!