BE112 atomizer device?

[Libertysf]

I really like the BE112 atomizers and have been using them with the Joyestick V3 but that takes a little effort to work by pulling out the post and would like to find another long life battery or device to use with these atomizers.

Something like the eGo battery with the 510 attys. I do have a BE112 pass-through that works great but I want something portable that lasts longer than the standard BE112 battery.

Any suggestions will be appreciated.

 

[cdmcfud]

You can get most mods with an 801 connection, Reo, Janty Stick, Chuck etc.
Their are a lot of mods that you can get an adapter for an 801 (BE112) atty.

 

[tinstar15]

If you have a short style 510 to 801 adapter (usually silver and about a cm long) and access to a belt sander or even a metal file you can modify an ego cone to fit. Take the ego batt, attach the adapter, add the be112 and your halfway there. Take the cone and file or grind about 1.5 cm off the smallest (top) end. Test fit it to the device. If it slides over with no resistance and leaves a tiny gap (about the thickness of a sheet of paper) between the atty and the inner edge of the cone, you are good to go. If it binds when sliding the cone on, file a hair or so more and try again.

Looks odd but works great. Of course you could always just use it as is without the cone but it looks a little odd. Or you could buy an ego with the mega xl attys which run about the same vaporwise as the be112s.