Best Hardware for Thick Juces

[Meebo]

I vape close enough to 100% VG and I'm getting fed up with the constant clogging of carto's with in a day or two.

Is there any Atties or Carto's that are made specifically for thicker juices but still produce and equal amount of vaper to the likes of Boge LR and Kanger HC carto's ??

One of my favorite juices clogs up a carto with in a day and then I spend the next couple of days feeling like I'm trying to suck a tennis ball through a straw, it's startin to peeve me off.

Can't afford to be replacing carto's every second day, there's must be a better way.

Thanks guys

EDIT: Awww maaaan just realised I left the " i " out of Juices in the title ..... DOH!!!

 

[hairball]

Unfortunately the answer is no. Thick juices that clog cartomizers will also clog atomizers. One option is to thin it down with distilled water, vodka, or pga. I wish there was a better answer for this but there isn't. I agree, it's a PITA when you get clogged (that doesn't sound right) but you know what I mean. Another option is to have 2-3 atomizers handy. vape one until it's clogged, soak it while you vape on another..keep rotating them out. Even then, it's still a pain.

 

[Boodle]

My 2 cents: I thin thick 100% VG juices with distilled water. I tried booze pga/vodka and didn't like the taste. At first it was just a little weird. Then it got worse. YMMV

I drip almost exclusively. Once you get the hang if it attys can last months. I figure I'll spend $50 with shipping over the next year on attys. I get them in bulk (10). Far less than I'd spend on cartos. Hope you find your happy place soon.

 

[Meebo]

I have tried Distilled Water and didn't like it. It reduced flavor, vapor and made me tight in the chest just the same as what PG does to me, I could definitely tell which of my juices had it in there.

This is why I've posted on here as I've tried all the other options and nothing so far works

I last used Atties quite a while ago before I found Boge LR and Kanger carto's as the flavor and vapor out of these was awesome so I never went back but I have no doubt there are Atties that perform the same just don't know which ones.

Which are the better Atties in the crowd for flavor and vapor ??

 

[Balthezar]

I DIY and find that by using a high nic (I'm using 36mg right now), adding flavor, and the VG to get it to 14mg, it works out well, good vapor and a little TH (I don't like a lot of TH). It's not too thick to use in my cartos, and I drip on atty when testing and it seems to work well for that, too. Just my

Balth

 

[Meebo]

I'm actually down you Zero nic

Have only been vapin zero for about a week now but I'm thinking I will stick with it as I'm not craving more vape.

 

[JD1]

Which are the better Atties in the crowd for flavor and vapor ??

The lr306 seems to get mentioned a lot in dripping threads. I like attys at about 2 ohms for my 3.4v ego and 3.7v e-power, but I'm not sure how they'd perform with all vg. The 1.7 ohm boge attys should be a good candidate as well.

Something for you to think about might be a bottom feeder. The boge revolution and the vapage v-mod have both been upgraded by their manufacturers. Also, some of the lower cost box mods have been getting good reviews, such as this one. http://www.e-cigarette-forum.com/fo...at-mods-original-3-7-bottomfeeder-sale-3.html

 

[leftfeild]

I use vg, some liquids are almost as thick as syrup. My solution? Take a CE2 (aka fluxomiser), take the seals out, put the inner seal back in upside down... win in general. Wicks perfectly and can hold up to 1.8ml at a time. What else could you want.

Oh, and they last for months.

 

[Nomoreash]

For a carto I'd recommend CE2. There is no filler to clog and and they are easy to clean, mine last months with periodic cleaning. They can be fiddly though to get the best performance out of them.

If you don't want to go that route someone mentioned a bottom feeder, that matched with a good atty is probably about as hassle free as it gets.

 

[Big Screen D]

I third the Fluxomizer recommendations. As Leftfeild suggest, mod it using only the middle plug.

Once past half empty, I do the magic wand maneuver...flip it upside down a few seconds between vapes to help with wicking.

Carto's only last me a few days at best when vaping 100%VG.

 

[gingersnaps]

I second the ce2. I use all vg and use them with no problems. I have had them last anywhere from a few weeks to several months.

 

[RedZone]

Direct Drip on a LR510 Atty, and you are back in Vape Heaven!
You don't have to thin out the juice at all. Just get some grain alcohol to clean the Atty out once a week, and those LR atty's will run a long time...

 

[Nashy08]

I also would recommend the ce2/Fluxomiser. I took the inner seal out of one of mine and cut it a bit wider to wick the vg better, but Leftfeild's mod works nicely as well and is probably easier.

 

[Meebo]

Thanks for the advice guys, I shall grab a couple of CE2's and 510 LR Atties in my next order to try.

Grain alcohol for cleaning too huh, so far I've just used hot water but I don't think it really does anything so I prolly should give that a go too.

 

[mynameisrob]

Personally I hate the ce2 cartos, but everyone has their own preference.
I'd maybe try the Ressurector cartos. Their made for 3.7V, but will work on an eGo, just not at their full potential. They are wrapped
More loosely than some other cartos and seem to be able to handle thicker juices better. The ce2 cartos arnt bad, I just hate how you always have to do little things just to get them to work like their supposed to.
I vape a dark 85%vg juice that is thick and have been using the same ressurector for it for almost 4 weeks, and I never clean them. Filling them right is very important to get them to last long, I use a syringe.
While thick juices def clog cartos I find that's not the biggest culprit to quickly clogged cartos. Juices with sediments clog cartos faster than anything so I recommend you try not to use them if you can. I've been vaping 2 juices a lot lately. One is 80% PG with sediments, and the other is what I said before, 85% VG but without sediments. Even tho the 80%PG is very thin, it clogs my ressurectors much quicker than the thick 85% VG. I easily get a few weeks out of one carto with the thick juice, but with the thin juice with sediments, I barely get a week on a Ressurector.
So if you can, try to stay away from juices with sediments, your cartos and wallet will thank you

 

[tlynn]

I also recommend the ce2 but I prefer the 1.5 ml Vision over the Fluxomizer. The bigger visions don't wick as well for me.