Best RDA clone?
- Thread starter Bazooka_Tooth
- Start date
- th_trl_thread_readers 0
- Status
Patriot possibly. Maybe Nimbus. "Best" and "clone" really don't belong in the same sentence IMHO.
My favorite is the trident. in single you have multiple air flow options and in dual mode it has two 2 mm holes. easy to build on and worsk great.
the nimbus clone is ok, look nice, not bad to build on. seems to get hot though and you will have to drill out the holes
the nimbus clone is ok, look nice, not bad to build on. seems to get hot though and you will have to drill out the holes
I just ordered a Russian 91% clone from fasttech. Heard it (and the other "Kayfun" clones as well) can be used as both a dripper and a tank-fed atomizer. Also looking into getting a couple of newer models one of which is called the "Rocky" which has a pump-able drip tip which allows juice to "drip" onto the atomizer from the tank and another new one called the "eXpromizer" which is supposedly like having all the best features of the "Kayfun" and "Tayfun" together in one device.
Not crazy about my topper clones but I love my drilled $10 UD IGO-W.
FT has IGO-W plastic caps on the cheap if you like easy drill.
FT has IGO-W plastic caps on the cheap if you like easy drill.
The only RDAs that come with 2mm airholes as stock tend to be those with variable airflow.
The best of those in a clone is probably the trident v2 as stated above.
The best clone however, IMO, is the patriot. You will need to drill out those air holes yourself though.
The best of those in a clone is probably the trident v2 as stated above.
The best clone however, IMO, is the patriot. You will need to drill out those air holes yourself though.
I got the Trident V2 clone. It has a turning band where the airholes are located with 3 different size single coil air holes and two sets of dual coil holes. Don't run dual coils I run single nano and it's throwing the vapor at 1.2
I enjoy my Patriot clone, but I did have to drill the airhole out for a looser draw. When choosing one don't forget about whether or not you want 2 post of 3 post, deck size, o-rings, and the way you fasten the leads (some are better IMO).
It's most likely the EHPro atomic or the EHPro trident V2. I don't think you could go wrong with either one of those.
I only bought one RDA clone but I'm very happy with it. It's an EHPro Helios. It has four 1.5mm air holes. Two on each side so you get plenty of airflow when opened up or a tight draw when partially opened. It has an AFC ring that is easy to move but not so loose that it moves when in the pocket. You can't put it in single coil mode so it's made for dual or quad coils. Very easy to build on and good quality. My brother has an original Omega and his looks better but that's about it.
Oh forgot that they have cheap ones on fasttech but I read they only have airflow on one side so those are no good unless you drill.
I have a Patriot and a Helios. I like the Helios more because of the air control ring, comes in very handy. Like Dayglow said the air holes on the Patriot have to be drilled a little. I drilled mine to 3/32.
Trident would be my suggestion, decent quality and adjustable airflow. The Patriot clone is built fairly well but only had 1 stock airhole and it is a pinhole, I mean tiny. Igo-L or W could work well too but you'd have to drill those out too.
What about the Crown maybe? I think it is the clone of the Kastle which is a killer RDA.
What about the Crown maybe? I think it is the clone of the Kastle which is a killer RDA.
With FastTech pumping out so many clones it's definitely hard to determine. Before I would have said the Nimbus, but I'm going to have to go with the Brass Monkee clone. Having two separate areas for coils leaves it so much easier to build dual or quad coils, and the adjustable air flow just makes it king in my opinion over the others on the clone market right now IMO. But like a driver behind a car, the RDA experience comes down to the build that it's packing.
I have a patriot clone and it does pretty well with a PMMA cap that's wider airflow.
EHpro ATOMIC ...!!! This little thing IMO has the best flavor out of all my RDAs. I have a Stillaire that on a dual coil hits like a train and its easy to build. I also have an original Enigma that I highly recommend and its not too expensive.
umm, can't say, don't have a dripper clone, do have the Magma, and it is quite excellent, well worth the price of admission.
I don't know if I would label anything in the vaping world "the best". having said that, I am happy with my EHPro nimbus clone. I enlarged its air-holes but that's a personal preference thing. Other than that, it's easy to build on and the quality seems top notch.
- Status
Similar threads
