Beware of KFL+ V3 Black edition airdraw

[Jdbaker82]

not sure if it's just me but the draw is too tight for me even with air adjustment screw totally removed. KFL + V2 and Russian 91% can get much looser... Maybe my clone from Artemus is a bad egg.

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[Jdbaker82]

actually it looks like drilling the side airhole to 5/64 would fix the problem has anyone ever done this??

The bottom airhole is more like 5/64 side airhole is like 1/16. Cover the side airflow and you can tell that's the bottleneck.... I guess you get what you pay for other then that it's great

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[retic1959]

not sure if it's just me but the draw is too tight for me even with air adjustment screw totally removed. KFL + V2 and Russian 91% can get much looser... Maybe my clone from Artemus is a bad egg.

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

You might want to check your center post to make sure it's free of debris left over from machining and you may need to adjust the center post to make sure the airhole in it is lined up correctly , you're gonna have to shine a light down the center post to see what I'm talking about .

 

[Jdbaker82]

OK final verdict the V3 is a PoS don't buy one at least not the one from Artemus custommodcreation.com I think it's made by hcigar not sure the box looks generic that it came in and this thing is junk

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[StereoDreamer]

Clones are like cheap hand tools--you pay for them twice.

Once when you buy them, and again when you get so frustrated with the fact that they are non-working POS crap that you go out and buy the "good stuff" to replace them...

 

[Jdbaker82]

instead of throwing it out I invested further I took the entire center post out and found out that crappy little airflow hole wasn't lined up in worked on it for an hour trying to figure out how to get it to lineup and now everything is working fine.... not only was it not lined up there was some sort of debris in the center pin....

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[Marc411]

instead of throwing it out I invested further I took the entire center post out and found out that crappy little airflow hole wasn't lined up in worked on it for an hour trying to figure out how to get it to lineup and now everything is working fine.... not only was it not lined up there was some sort of debris in the center pin....

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

Except for having to do a little rework it's all good now and vaping solid?

Worth the investment?

 

[Jdbaker82]

Except for having to do a little rework it's all good now and vaping solid?

Worth the investment?

it's basically the same thing as the V2. I really like the ehpro v2 clones.... and the Russian 91%.

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[jonhall2]

jd, i got two black ehpro v2 lite plus today. the draw is tight. the v1 i got made by them a month or more back had debris in the pin. i drilled the pin to 1/16" which got the debris out and enlarged the opening minimally. i then drilled the mouth piece to 1/16" and made that larger with 5/64" bit. i was disappointed this needed to be done but it solved the problem. the new ones need the same treatment. no debris this time, just tight draw. no need to drill the intake in the base. my smovesto 3.1 draws better still, but the fill port is useless. top feed only. i will still take two for the price of one.

 

[Jdbaker82]

jd, i got two black ehpro v2 lite plus today. the draw is tight. the v1 i got made by them a month or more back had debris in the pin. i drilled the pin to 1/16" which got the debris out and enlarged the opening minimally. i then drilled the mouth piece to 1/16" and made that larger with 5/64" bit. i was disappointed this needed to be done but it solved the problem. the new ones need the same treatment. no debris this time, just tight draw. no need to drill the intake in the base. my smovesto 3.1 draws better still, but the fill port is useless. top feed only. i will still take two for the price of one.

Where is the Russian 91 style clone that has the same good airflow as an authentic Russian 91? I will probably buy another authentic Russian (black) however I like having 4 or 5 of them on hand for different flavors at all times

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2