BIG Problem with my GGTS

[MonsterKenny]

I have had my GG for a while now.. And it is the best unit ive ever had. Ive used over 7 mods.. So if new gg users read this dont think of me giving negative feedback about GG's or to IMEO. Because im not!
But.. my ggts will not work at all.. every atty i put on there it fries. there is something going on with the current running through the gg that is killing my atties. Also, it just does not fire at all.. I have the magnets in my button, and i have cleaned everything and have 2 top caps. But still nothing. I think i have to buy another now...
So if anyone can help, that would be great!

 

[wood_510]

how long are your attys lasting? for example are the burning out immediately or over 30 minutes or something else?

 

[MonsterKenny]

how long are your attys lasting? for example are the burning out immediately or over 30 minutes or something else?

Wood, i have never burned out an atty with my gg in like 4 months until now...

 

[TommyGunBC]

what type of atomizers are you using 901 , 510 , 801 ? it may be a bad batch of atomizers ? I can't see anything that could make the GGTS short out other than one of the insulator rings in the bottom or top cap came apart but unless you pulled it apart that shouldn't be a issue .

check to make sure the little rubber ring is in the bottom of your atomizers this will cause a short and fry the little buggers .

What size and type of batteries are you using ?

 

[MonsterKenny]

what type of atomizers are you using 901 , 510 , 801 ? it may be a bad batch of atomizers ? I can't see anything that could make the GGTS short out other than one of the insulator rings in the bottom or top cap came apart but unless you pulled it apart that shouldn't be a issue .

check to make sure the little rubber ring is in the bottom of your atomizers this will cause a short and fry the little buggers .

What size and type of batteries are you using ?

Tommy, i use iattys. They have never caused me a problem. And i use protected batteries. Mainly 3.7 v. All m atty's are in good shape. I took apart my top caps to clean them and some black chunks came out... Being the cap isolators..
Im ecig less now, so im ordering a slim!
i really want a ggt!

 

[harpo]

If you have a multimeter check the resistance between the center pin on the GGTS and the outside of the threads. If 0 you have a short.

 

[MonsterKenny]

If you have a multimeter check the resistance between the center pin on the GGTS and the outside of the threads. If 0 you have a short.

Harpo, i dont have one

 

[harpo]

Harpo, i dont have one

Is the atomizer firing right when you screw it on or does it last awhile?

 

[MonsterKenny]

it was working... now i get nothing... i even tried a brand new 510 and nothing.. my GG has a Virus! its killing me!

 

[harpo]

it was working... now i get nothing... i even tried a brand new 510 and nothing.. my GG has a Virus! its killing me!

Make sure the locking screw on the button isn't unscrewed. Do you have a standards ecig battery by chance? If so, try these atties on it.

 

[harpo]

One more thing you can check. Make sure you have fresh batteries and do the tongue test. Remove the atty and put you tongue on the center post and fire the button. If your tongue tingles your getting voltage to the atty.

 

[MonsterKenny]

Make sure the locking screw on the button isn't unscrewed. Do you have a standards ecig battery by chance? If so, try these atties on it.

Im using a tornado right now
so my atties still work..ive had my gg for a while now, and ive tried everything.. been vaping awesomely for 4 months!

 

[harpo]

Im using a tornado right now
so my atties still work..ive had my gg for a while now, and ive tried everything.. been vaping awesomely for 4 months!

Do the atties that don't work on the GG work on the tornado?

 

[MonsterKenny]

Do the atties that don't work on the GG work on the tornado?

Well not the iattys because the battery on the tornado wont let them work anyway. Resistance factor. But i tried them on a MAKO and they work fine.

 

[harpo]

Well not the iattys because the battery on the tornado wont let them work anyway. Resistance factor. But i tried them on a MAKO and they work fine.

Is your switch locked? If not, do the tongue test.

 

[harpo]

Also make sure your top and bottom cap are on tight.

 

[MonsterKenny]

Also make sure your top and bottom cap are on tight.

Yea everything is as it should be.. its a current issue!

 

[harpo]

Do the tongue test and tell me if you feel a tingle.

 

[crashtestjeep]

the black pieces that came out...was that the delrininsulator that seperates the center pin from touching the outer ring? If so that will make a short as well. You say you have another top cap...is the black insulator ring still in that one?

Also, make sure ur spring is not bent and touching anything else but the bottom of the batteries....

Hope it works out for you, Im sure Rob or Imeo will sell you just an isulator ring if thats all thats wrong w it....

 

[TommyGunBC]

Tommy, i use iattys. They have never caused me a problem. And i use protected batteries. Mainly 3.7 v. All m atty's are in good shape. I took apart my top caps to clean them and some black chunks came out... Being the cap isolators..
Im ecig less now, so im ordering a slim!
i really want a ggt!

There ya go that is your problem , it is the insulators in your cap I guess you will have to get Imeo to send you a new one , hope your other mods don't let ya down until this is all fixed .