Billow V2

[Factory]

I guess you all should know that PG burns at 370 deg F and that is why if u go too high power the flavor starts disappearing. 0.95ohms at 30w? You are bound to burn your cotton even if you wick very well. That's dissipating past 5v of power. And if you know batt safety, you are killing your batts' life cycles tremendously. Unless you are on triple or quadruple coils or super thick claptons or fused claptons. If you are on kanthal and single coil, you are tasting burnt juice every single draw.

Thanks for the valuable feedback.
I have since rebuild to 0.66. Now seem to taste better.
Also added an additional O-ring on top of the AFC, which stop the leak(Since yesterday morning till now, no leakage detected)

 

[nickpainter]

i have a billow v2 nano and billow v2 5ml, its near impossible to do nickel coil. i had to do 14 wraps on each side and its so tight fit. i'm sticking with kanthal.

my ninja black setup

 

[lsecretl]

Have the billow v2 nano as my second tank (first is Subtank mini using the RBA)

I find more clouds on this, taste wise the subtank mini is better for me. The billow gives me a more "filling" throat hit. Running subtank mini at 24W(0.5 ohm) and this at 30W (0.3 ohm).

Wicking wise,
The RBA is hands down much easier to recoil and wick, while I am still have issues learning how to wick the billow(not leaks but dry hits) but once I get it right it's really nice.

Coil,
Again RBA being single coil and not much funny angle I find it much easier to coil over the billow. Plus the deck size on the billow is damn small...

Frankly at least in my humble opinion, I think each has its own pros and cons. I do enjoy both but I use the billow with VTC mini outdoors more since it's more discreet, but the clouds... Lol... Must talek and hold it much longer in order not to create unwanted attention.

Now... My next target when I am traveling for work again is the velocity RDTA, seems like a lot of good reviews.

Lastly... When I started out vaping to quit analogs... I was laughing at why people buy so many tanks... You just need one... But .... man... This addiction is REAL

 

[StinkStick]

Don't drop it. Nano glass not easy to find..

 

[Darkangel]

[QUOTE="lsecretl, post: 16954259, member: 268827"

Lastly... When I started out vaping to quit analogs... I was laughing at why people buy so many tanks... You just need one... But .... man... This addiction is REAL[/QUOTE]

When you are a vaper for sometime, you be going stealthily by getting other tanks or mod that are small and stealth to avoid attention. And never vape openly.


Sent from Gotham City using Tapatalk

 

[Scarcliff]

I've been using billow v2 for about a month now. Easy to coil and wick. Flavor and vapor, love it.

I'm currently on my 3rd glass now. My first glass that came with the tank, cracked on the 2nd day. My second glass cracked this morning. Luckily, I bought 5 spare glasses ever since the first one cracked on me but 1 came shattered.

Is it me or is the the glass too fragile? I have never drop the tank before.

 

[StinkStick]

It's probably just you..

 

[Scarcliff]

It's probably just you..

Really? Couldnt tell.

 

[VapGeek]

I've been using billow v2 for about a month now. Easy to coil and wick. Flavor and vapor, love it.

I'm currently on my 3rd glass now. My first glass that came with the tank, cracked on the 2nd day. My second glass cracked this morning. Luckily, I bought 5 spare glasses ever since the first one cracked on me but 1 came shattered.

Is it me or is the the glass too fragile? I have never drop the tank before.

Crack during dis-assembly?

 

[Scarcliff]

Crack during dis-assembly?

During assembling. Both cases after filling the juice up and screwing it back it.

 

[VapGeek]

During assembling. Both cases after filling the juice up and screwing it back it.

U can use your juice as lubricant. Apply to the edge of your glass and the o rings, so that it is easier to assemble.

 

[winx19]

hi all,

got a billow v2, believed its a clone (airflow adjuster is in plastic). resistance reading on IPV 4S (keeps going up and down). it happen a day after i used it, ohm reader: 0.6 ohms. IPV reads: ranging from 1.0 - 0.5ohms. other tanks / rda i used on ipv has no issues.

am i missing something here?

 

[grigorekzh]

Got a billow v2 nano w my sigelei. Could NOT for the life of me not get a dry hit. Experiment like siao. Finally i got the cotton just right. It has to just about fit in the coils with almost no resistance. Crackling every now and then but its a pretty good vape. Thinking about changing to clapton coils... Does 2mm w 6 wraps sound ok?

 

[Hiramkunz]

hi all,

got a billow v2, believed its a clone (airflow adjuster is in plastic). resistance reading on IPV 4S (keeps going up and down). it happen a day after i used it, ohm reader: 0.6 ohms. IPV reads: ranging from 1.0 - 0.5ohms. other tanks / rda i used on ipv has no issues.

am i missing something here?

Could be your leads not tight enough.