Billow V2

[Karstine]

Any idea what is the recommended ohm? My previous stock coil was 0.42, which has great flavor. This time round is 0.95. Bad flavor. The lesser that wrap, the lower the ohm?

Let me guess, your 0.95 coil you vape at 30 watts?

 

[ezjayy]

Billow V2 is my currently my favorite rta.

Good build quality, relatively easy to recoil and wick and ive not had any leaks throughout the 3-4 months of daily use.

Good vapor production too as its dual coil and good flavor.

Only downside is the rba is small and at best you can probably fit a 26ga wire on it. No room for claptons or twisted.

Thinking of getting a 2nd one, probably the nano version.

The difference between the nano and its big bro is just the amount of juice..so since the billow can be a bit of a juice drainer, the bigger one is a much worthwhile choice imo.

 

[ZakkWylde]

The difference between the nano and its big bro is just the amount of juice..so since the billow can be a bit of a juice drainer, the bigger one is a much worthwhile choice imo.

Agreed.

But Why the nano its because i need a compact setup for my travels.. Also black for stealthy look..

 

[ezjayy]

Yeahhh definitely in black.

 

[Factory]

Let me guess, your 0.95 coil you vape at 30 watts?

Yah u so accurate. haha

 

[isux]

Any idea what is the recommended ohm? My previous stock coil was 0.42, which has great flavor. This time round is 0.95. Bad flavor. The lesser that wrap, the lower the ohm?

You can get more information here regarding coil wrapping.

 

[Factory]

You can get more information here regarding coil wrapping.

wow thanks for the info. Just realize i wrap too much, which causes my ohm to read 0.9

I did 7-8 wrap for a 28 awg, which is too much.
Should do 4 wrap

Will try tonight thanks bro!

 

[isux]

Hmm. Not quite sure if you are clear about chasing the ohms in this manner. I think it's perfectly alright to vape @ 30W with a 0.95 Ohm coil.

 

[ezjayy]

Hmm. Not quite sure if you are clear about chasing the ohms in this manner. I think it's perfectly alright to vape @ 30W with a 0.95 Ohm coil.

Perhaps the man prefers a much warmer vape?

 

[isux]

Perhaps the man prefers a much warmer vape?

Hmm. Perhaps so.

One useful article you may read to get a clear picture of high vs low powered vaping.

 

[Karstine]

wow thanks for the info. Just realize i wrap too much, which causes my ohm to read 0.9

I did 7-8 wrap for a 28 awg, which is too much.
Should do 4 wrap

Will try tonight thanks bro!

30 watts at 0.95ohm is 5.34 volt. That's a bit too high. Those who use high resistance coil but complain about taste usually overpower their coil.

 

[Factory]

30 watts at 0.95ohm is 5.34 volt. That's a bit too high. Those who use high resistance coil but complain about taste usually overpower their coil.

I guess so. Need to trial and error to get the correct taste

 

[Factory]

Hmm. Not quite sure if you are clear about chasing the ohms in this manner. I think it's perfectly alright to vape @ 30W with a 0.95 Ohm coil.

The only issue i encounter is the flavor. When i uses my previous coil @ 0.42, flavor is good. When i uses this new build @0.92, flavor seems to die off after a while(1 or 2 times of usage). Im using the same juice, so i guess it might due to the resistance used.

Apologize in advance if i sounds noob

 

[Karstine]

The only issue i encounter is the flavor. When i uses my previous coil @ 0.42, flavor is good. When i uses this new build @0.92, flavor seems to die off after a while(1 or 2 times of usage). Im using the same juice, so i guess it might due to the resistance used.

Apologize in advance if i sounds noob

Voltage is different. Input your values into the ohms law section of the steam engine calculator

 

[isux]

Voltage is different. Input your values into the ohms law section of the steam engine calculator

Ahem. Yes. And the Power law as well.

 

[Epic_Sinner]

I guess you all should know that PG burns at 370 deg F and that is why if u go too high power the flavor starts disappearing. 0.95ohms at 30w? You are bound to burn your cotton even if you wick very well. That's dissipating past 5v of power. And if you know batt safety, you are killing your batts' life cycles tremendously. Unless you are on triple or quadruple coils or super thick claptons or fused claptons. If you are on kanthal and single coil, you are tasting burnt juice every single draw.

 

[isux]

I guess you all should know that PG burns at 370 deg F and that is why if u go too high power the flavor starts disappearing. 0.95ohms at 30w? You are bound to burn your cotton even if you wick very well. That's dissipating past 5v of power. And if you know batt safety, you are killing your batts' life cycles tremendously. Unless you are on triple or quadruple coils or super thick claptons or fused claptons. If you are on kanthal and single coil, you are tasting burnt juice every single draw.

Yoda has spoken. Behold the very words of the Reverend himself.

 

[Epic_Sinner]

You see me too up.

 

[isux]

You see me too up.

Anything that gets me relegated from your wanted list.

 

[Epic_Sinner]

As long as you guys maintain, the list will not be out.