Boge Carto Question.

[S2KG]

Good afternoon ECF! I have recently ordered a whole bunch of Boge SR Cartomizers, and a Phiniac Tank! Will be using it on the Vamo I ordered.

The juice I vape is 70%/30% VG/PG, so it is pretty thick. I will be using a Siam mods V2 tank punch that I picked up from phiniac as well.

I've tried to figure out what the general starting point should be for the holes I punch, but I've had no luck...
All I've figured out is that on the Phiniac site they recommend to make 1 hole " large " via 4 full turns. Would this be optimal, or would two smaller holes work better? If so, should they be 3 turns, 2 turns ETC?

If anybody has any pictures of hole sizes that work, or any advise for me that would be great!
I don't want to go through to much juice / cartos while trying to figure out my sweet vape spot. "PS All my juice is the same weight"
Thanks guys

 

[Orobas]

I'm not familar with that particular puncher. Two smallish holes is generally got for my 50/50s.

What I would do is get a tank filling tool (like the slap yo mamma) in case you need it. Follow their advice but make sure to prime the carto really well. If the flavor falls off after a normalish interval (as if it wasn't in the tank) or it doesn't appear to be wicking as much as you want, you can slap the adapter on it, and slide it out just far enough to put another hole in it.

It takes a little trial and error no matter what, but with the proper tools you don't have to waste cartos while you experiment.

 

[doots]

I always use 2 holes. large. but thats me..

 

[eratikmind]

Good afternoon ECF! I have recently ordered a whole bunch of Boge SR Cartomizers, and a Phiniac Tank! Will be using it on the Vamo I ordered.

The juice I vape is 70%/30% VG/PG, so it is pretty thick. I will be using a Siam mods V2 tank punch that I picked up from phiniac as well.

I've tried to figure out what the general starting point should be for the holes I punch, but I've had no luck...
All I've figured out is that on the Phiniac site they recommend to make 1 hole " large " via 4 full turns. Would this be optimal, or would two smaller holes work better? If so, should they be 3 turns, 2 turns ETC?

If anybody has any pictures of hole sizes that work, or any advise for me that would be great!
I don't want to go through to much juice / cartos while trying to figure out my sweet vape spot. "PS All my juice is the same weight"
Thanks guys

I have vaped 100% VG and 2 holes were adequate. Size of the holes? . . . Well, that's going to be trial and error on your part. Good luck.

 

[Unforeseen]

Moved to Assorted PV Topics - Cartomizers

 

[reeftivo]

2 holes

Large! If you fire a carto dry its ruined and so are your taste buds.

 

[oplholik]

I punch 1 hole approx. 1mm in dia. Works just fine for me using 70/30 pg/vg.

 

[S2KG]

Update. I've been using my Carto Tank system for about a while now, I absolutely love it!
I punch 2 large holes. - 4 and a half full turns using my carto punch tool and I have not had any burning issues, or flooding issues. Best way to vape! I love it!