bottom fed attys at $5
- Thread starter opensec
- Start date
- th_trl_thread_readers 0
- Status
Those are some low prices. I went and ordered a couple atties I don't need and very likely will back-burner, just because it's worth $5 (OK, one was $8) for me to fiddle with and see WHAT I like about the design. If I actually really dig them, "bonus!".
I bought a BF Zenith a couple months ago for around $15.
Three more for the same price seems a deal even though they are not needed. Still have not found the sweet spot for me.
Three more for the same price seems a deal even though they are not needed. Still have not found the sweet spot for me.
LINK!
Search results for 'Zenith'
They have SS, Gold and Brass (black is out of stock )
ordering mine now
Search results for 'Zenith'
They have SS, Gold and Brass (black is out of stock
)ordering mine now
heard they were great flavor atty, r u sure there's a tank? thought it was RDA?
(black is out of stock
haha, I placed my order right before they became out of stock, should be in my mail box right now
haha, I placed my order right before they became out of stock, should be in my mail box right now
ssuurreee... rub it in.. JERK..
lol
Guess I'll have to get a dirt cheap fast tech clone at some point and swap out the afc ring (assuming it fits..) hehe
Well, As planned I received my order yesterday and I have to say that I'm pretty impressed.
I got two Orchids v4 (the V6 appeared in the "coming soon" part of the website right after that
), no surprise here, I had one already, it performs flawlessly and I just love this atty, to me it has everything, convenience of a RTA, flavor of a RDA, what else to ask ?
Also got their clone version of the erlkorigin - don't know why I ordered it, I mean, it's a tank, it's very finicky, wicking is a headache, flavor is ... well, not better than a kayfun - and the whole thing looks flimsy and cheap - oh yes I ordered it because it was $10, not $160 - in the drawer, will eventually play with it when bored
now I also got the Zenith 2.5, 4 of them actually, $5, and bottom feeder ready, since I am currently building a BF device, it was a no brainer, and boy Am i happy i ordered those!
this atty reminds me a lot of the magma, deep well, one or two coils, very easy to build on. The screws work with an allen key, I know a lot of people don't like this, personnaly, I do, a lot, the grip on the screw is firm and tight and you have much more torque than you would with a blue screwdriver, I guess it's personnal preference. I threw one build one the black/stainless one (looks like a beauty queen on my ipv2s), dual coil 0.5 ohm, basic stuff. I'm currently vaping on it at 45 watts and it is very very nice, the vape is neither too warm or cold, just balanced right for me, and the flavor is very close if not equal to the magma. can't wait to squonk with it
the only negative point the afc ring movement is not very smooth, but hey no big deal, I have it fully opened, the top can screws on it and it just doesn't move. Also, the O rings do not maintain the top cap strongly enough to my taste, i may end up changing them.
I got two Orchids v4 (the V6 appeared in the "coming soon" part of the website right after that
), no surprise here, I had one already, it performs flawlessly and I just love this atty, to me it has everything, convenience of a RTA, flavor of a RDA, what else to ask ?Also got their clone version of the erlkorigin - don't know why I ordered it, I mean, it's a tank, it's very finicky, wicking is a headache, flavor is ... well, not better than a kayfun - and the whole thing looks flimsy and cheap - oh yes I ordered it because it was $10, not $160
- in the drawer, will eventually play with it when borednow I also got the Zenith 2.5, 4 of them actually, $5, and bottom feeder ready, since I am currently building a BF device, it was a no brainer, and boy Am i happy i ordered those!
this atty reminds me a lot of the magma, deep well, one or two coils, very easy to build on. The screws work with an allen key, I know a lot of people don't like this, personnaly, I do, a lot, the grip on the screw is firm and tight and you have much more torque than you would with a blue screwdriver, I guess it's personnal preference. I threw one build one the black/stainless one (looks like a beauty queen on my ipv2s), dual coil 0.5 ohm, basic stuff. I'm currently vaping on it at 45 watts and it is very very nice, the vape is neither too warm or cold, just balanced right for me, and the flavor is very close if not equal to the magma. can't wait to squonk with it
the only negative point the afc ring movement is not very smooth, but hey no big deal, I have it fully opened, the top can screws on it and it just doesn't move. Also, the O rings do not maintain the top cap strongly enough to my taste, i may end up changing them.
Looks like a US based site of either a Fatsech or Focalecig. US portal and warehouse for cheap Chinese clones. Should help with delivery on my next order of clone toys.
Yup. I think their warehouse is in SoCal (easier to get stuff off the boat from china I imagine). I got a veritas clone from them a while back (mid Sept) and still use it to this day as one of my favorites.
I ordered two of these attys (silver and copper) and the copper Smpl clone. I'll post once I get it in with some initial thoughts.
I posted this same thing on another thread, but it makes sense here too:
angelcigs took a long time to get the shipping confirmation to me - Ordered thursday around 9am CST, got confirmation today (monday). The package got picked up by USPS on friday, and is already at the distribution center closest to me, and thats the important part. I was going to contact them if I had heard anything by tomorrow.
Hope that's helpful to someone else anxious to get their shipping notifications - but again, its not always like that - last time I ordered they had the tracking number to me the next day.
angelcigs took a long time to get the shipping confirmation to me - Ordered thursday around 9am CST, got confirmation today (monday). The package got picked up by USPS on friday, and is already at the distribution center closest to me, and thats the important part. I was going to contact them if I had heard anything by tomorrow.
Hope that's helpful to someone else anxious to get their shipping notifications - but again, its not always like that - last time I ordered they had the tracking number to me the next day.
I think their clearance puts logistic pressure on them
true, but I imagine their ordering system is automated (at least customer orders from the website to the US Warehouse). I'm sure the clearance does take time for them to punch all the orders in as "processed" Free advertising like this helps though I'm sure
I didn't notice anything... I just gently "spun" it on like I do most attys. Same with the smpl. Get it started then spin it until it stops and give it a little more torque so it stays in place (but not putting to much stress on the threads).
Rocking .7ohms 28ga on the Reo.. not really digging it. Did the same on the smpl, and it was a better build, was good, but I wanted to try something else, so I (just finished) put a .35ohm with 26 ga.. Will probably bump that up more next time. Get better battery life, and this low seems to be killing my juice
Had decent clouds at .7ohms probably shoot for .6ohms.Was playing with the heat flux tool on steam-engine.org - i don't know how accurate that color guide is.
defiantly easy to over drip in these things
hoping to get a good build nailed down soon so I can switch to RxW, wicking with JC until I find something I like Probably keep playing with the 26ga on the next few builds.- Status
Similar threads
