BOTTOM FEEDERS= a place for everything modified and/or custom made

[Pdizzle]

If you modify the bottle space only. The front door and/or the back of the case need to be shaved, to get the door to fit flush. The bottle will squeeze in from side to side, but its too tight in my opinion. You might want to give you're Japanese bottles a try?

I didn't order them yet. Was hoping you'd have good luck with the Reo bottle so I could order tubing and everything right from Reo mods instead of trying to piece everything together like the creator of the box did

 

[alekos557]

Decided it was time to retry bottom feeders, since trying the new generation of RTAs/RDAs and RTDAs. Those old atties just didn't cut it for me with bottom feeders
Pretty displeased with the results overall. Too wide and blocky, not happy with the door fit. Overall "eeehh".
Think I will complete it as a unregulated just to try out BF RDAs.
Just applied a butcherblock oil to protect it during assembly and test fit the switch. Will have to order a BF 510 connector. Anybody know if FatDaddy has a US vendor? Or any other vendor for BF parts. Thanks.

 

[TheWestPole]

Decided it was time to retry bottom feeders, since trying the new generation of RTAs/RDAs and RTDAs. Those old atties just didn't cut it for me with bottom feeders
Pretty displeased with the results overall. Too wide and blocky, not happy with the door fit. Overall "eeehh".
Think I will complete it as a unregulated just to try out BF RDAs.
Just applied a butcherblock oil to protect it during assembly and test fit the switch. Will have to order a BF 510 connector. Anybody know if FatDaddy has a US vendor? Or any other vendor for BF parts. Thanks.

Sure is pretty though.

As far as I know Fatdaddy is direct only (very good service IMO) with some stuff on eBay.

 

[alekos557]

Thanks "TheWestPole" and "5spike"

 

[Doffy]

Math appreciation list:

1. penguiness
2.
3.

happy pi day

 

[TheWestPole]

For those of you who like me have been temped by @Subohmies handiwork squonkifying the Wismec RX200, take a gander at the Movkin Disguiser. Add a 510 up top and rewire. Imagine the bottle capacity possible in that big atty cage!

I've already seen pre-order deals under $40 and expect more of the same in the near future.

$47.84 Authentic Movkin Disguiser 150W TC VW APV Box Mod - 5-150W / 100-300'C(200-600'F) / 2*18650 at FastTech - Worldwide Free Shipping

 

[Subohmies]

For those of you who like me have been temped by @Subohmies handiwork squonkifying the Wismec RX200, take a gander at the Movkin Disguiser. Add a 510 up top and rewire. Imagine the bottle capacity possible in that big atty cage!

I've already seen pre-order deals under $40 and expect more of the same in the near future.

$47.84 Authentic Movkin Disguiser 150W TC VW APV Box Mod - 5-150W / 100-300'C(200-600'F) / 2*18650 at FastTech - Worldwide Free Shipping

View attachment 539641

A fountain v2 will do the job[emoji6]

 

[TheWestPole]

A fountain v2 will do the job[emoji6]

That's true too. But I already have plenty of those.

 

[laurie9300]

Squonking it! Subohmies style!



HELL YES!

Not as clean inside as Subohmies' one, but it does the job!

 

[Pdizzle]

I should try this. Just need an Rx200. Already have the dna 200

 

[TheWestPole]

Squonking it! Subohmies style!



HELL YES!

Not as clean inside as Subohmies' one, but it does the job!

Well done.

 

[cooper99]

Squonking it! Subohmies style!



HELL YES!

Not as clean inside as Subohmies' one, but it does the job!

You've been keeping busy I see. Nicely done.

 

[fishwater]

For those of you who like me have been temped by @Subohmies handiwork squonkifying the Wismec RX200, take a gander at the Movkin Disguiser. Add a 510 up top and rewire. Imagine the bottle capacity possible in that big atty cage!

I've already seen pre-order deals under $40 and expect more of the same in the near future.

$47.84 Authentic Movkin Disguiser 150W TC VW APV Box Mod - 5-150W / 100-300'C(200-600'F) / 2*18650 at FastTech - Worldwide Free Shipping

View attachment 539641

Well done @TheWestPole, I was thinking the same exact thing. I should just order it already.

Squonking it! Subohmies style!



HELL YES!

Not as clean inside as Subohmies' one, but it does the job!

@laurie9300 Awesome job! How did you cut the squonk hole & battery sled. Also, what 510 did you use?

 

[laurie9300]

@laurie9300 Awesome job! How did you cut the squonk hole & battery sled. Also, what 510 did you use?

I will post a full build guide as soon as I get a chance to write it up.

I used a dremel with a drum sanding attachment for the sled and squonk hole. The 510 is a FatDaddy V4 with the hollow pin. I sleeved the pin with 2mm OD stainless tube.

 

[healy9804]

Has anybody taken the internals out of a snowwolf mini or sig 75 and made it into a squonker?

 

[studiovap]

Havn't posted much recently so here's a couple of pic of recent work,

Mech without negative run down through the body (neg and pos contacts both at top), pure silver contacts and beryllium copper leaf switch

These two just before installing the FD 510 and adding SV to the button plate:

And a few early on in the works:

 

[Bimini Twist]

Beautiful mods!

How're you gettin' the negative at the top? I can't quite picture it, unless you peel away some of the battery sleeve?

 

[Alexander Mundy]

Awesome work @studiovap !

Beautiful mods!

How're you gettin' the negative at the top? I can't quite picture it, unless you peel away some of the battery sleeve?

Yep, looks like the same kind of negative connection I did with the little hybrid round squonker. Hadn't thought of doing it in a conventional mod, very good idea.

 

[Bimini Twist]

Innovative on both counts!

And you're not the conventional type!

 

[Pdizzle]

Would love to know how you did the no negative at the bottom connection.