Bought a complete kit

Status
Not open for further replies.

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,077
72
Ridgeway, Ohio
I'm assuming you got an eGo starter kit? Does the battery look like this?

eGo-Steel-Sleeve-Cone-(TypeB).jpg

If so, you turn the battery on or off by clicking the fire button quickly (within 2 seconds) five times. The button should blink a few times. If you press and hold the button the fire button should glow if it is on and charged.

Now, should you press the button and hold it and it blinks, it means the battery is low on a charge and needs to be put on the charger for 2 - 3 hours to charge it back up.

eGocharger.jpgeGo USB wall adaptor.jpg ego charger and wall adaptor

The battery screws into the charger, and the charger's USB connector put into an USB/wall plug. The charger should have an indicator light that turns red when the battery is charging, and will blink as it checks the status of the battery. When the red light turns green, the battery is charged.

There is a video in the following link showing the operation of an ego battery:

A Good Starter Setup for a Beginning Vaper
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread