Building stage beginning soon.

Status
Not open for further replies.

Davantrac

Ultra Member
ECF Veteran
Verified Member
Jun 3, 2014
1,190
1,272
Darlington, UK.
I've now got my order in for a Kayfun Lite Plus V2, a Rocket V1, some kanthal, drip tips a and more eliquid to try. Also ordered a nautilus 5ml model and 10 BVC coils just in case I struggle with the coils. I have an ohm meter now and a few multimeters lying around I will get sorted out while waiting for delivery. Just need to get some cotton for the wicks and I think I'm all set. I'm not going to be to fussy to start as long as I get tight wrapped coils (micro coils I believe they are called), between 1.0 and 2.0ohms I'll be happy.
So it's get out the meters and check the batteries, then feet up for a couple of weeks waiting for the postman.:)
 

Davantrac

Ultra Member
ECF Veteran
Verified Member
Jun 3, 2014
1,190
1,272
Darlington, UK.
Just bought 2 pair of tweezers at the weekend, 1 pointed and 1 flat. Plenty of nail clippers lying around. And good point with the torch, I forgot that. I have one somewhere that runs on lighter butane gas that will be ok, I'll dig that out and make sure it's working. I'll check what drill bits I've got left but was planing on just a small screwdriver for that, I'll get the micrometer out to check what I have, planning on about 2mm inside dia of the coils.
 

Smann245

Super Member
Aug 16, 2014
531
352
USA
I use a refillable torch lighter and it works fine. The batteries power range, wire thickness, target ohms, juice flavor, pg/vg ratio, and personal preferences of the resulting vapor all affect the coil diameter you use. You will have to experiment to dial your setup in for what you like. Drill bit sets can be had for cheap since quality doesn't matter. I have five bits that cover any coil I'll need to build. Otherwise, I think you're about setup. Once you start to zero in on a personally crafted build that gives the performance you like, it's very satisfying. Good luck and enjoy. :)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread