Well so far it seems to be vaping really good right now but I guess time will tell
Building Wick Need Help
- Thread starter BigLiquid530
- Start date
- th_trl_thread_readers 0
- Status
wait till that one time you get a sheet covered in machine oil and forget to clean it
only takes one vape to never forget that flavor lol.
I roll mine semi tight with a small hole up the center just big enough for a paperclip roughly, on my VV no tilting, on my mech a little tilting once in a while.
like the other posts say always adjust everything dry first time. after a tank or two everything gets well cooked and the flavor really breaks out.
as for cotton its been done, you would have to poke around here for a bit to find some of the threads on it.
Well I good flavor for about 2 hits then all get a little metal taste, but then I let it sit for a min and I get flavor again and the metal taste, is that normal and I tilt as I vape
Hey guys, I just kinda stumbled across this thread, thanks for some good info, I have a fasttech I atty and am having trouble getting any flavour out of it. I have tried cotton and the mesh hybrid it came with, still get kind of a poor taste out of it. Not metallic but just boring. I have tried tilting and not, have used the orig twisted wire it came with, 28ga, 32ga and twisted my own 28 and 32, 2/3 wrap,3/4 wrap, micro- coil that was tough. I have a couple of sheets of 325 mesh on its way from lightning as I like high vg juices. Am I on the right track
Well so I got all the coils done right and this AGA T2 is vaping like a beast flavor is outstanding. I assuming you have to kinda prime the juice on the wick, not sure if thats the correct saying....
But anyways so far so good and thanks for all the help. Have the Russian 91% on the way so I will probably be asking tons of questions.
But thanks guys and gals
But anyways so far so good and thanks for all the help. Have the Russian 91% on the way so I will probably be asking tons of questions.
But thanks guys and gals
TA2OOZ
Are all the coils firing right
Also I'm using 500 mesh not sure I'd that makes a difference
I put juice on the wick to get it primed up where the coils is a couple times see if that works also make sure your wick isn't too tight in the hole its going down that's what happened to me when I used eco-wool the juice wouldn't come up because it was too tight
Are all the coils firing right
Also I'm using 500 mesh not sure I'd that makes a difference
I put juice on the wick to get it primed up where the coils is a couple times see if that works also make sure your wick isn't too tight in the hole its going down that's what happened to me when I used eco-wool the juice wouldn't come up because it was too tight
Ya I screwing around with the mesh again today and the atty got stuck on the top of my mod, must have cranked it down a bit too tight. And while trying to free it from its trap I broke the damn tank, now I need to find another, I really think I was getting somewhere with it too. Crap. 
- Status
Similar threads
