Burnt Flavor

[espkh123]

I am new here but I am curious as to why I am getting a burnt flavor sometimes.

I use an Itaste VV battery with a Kanger Protank mini v2.

I usually try to stick around 4 volts. 2.4 ohms
50/50 juice

 

[Comeoniwanalay]

I am new here but I am curious as to why I am getting a burnt flavor sometimes.

I use an Itaste VV battery with a Kanger Protank mini v2.

I usually try to stick around 4 volts. 2.4 ohms
50/50 juice

Im very glad to see this isnt all in my head. Im using almost the exact same setup. Same problem. Cant find any fix for it atm.

 

[Comeoniwanalay]

2.4 ohms sounds like the problem, go grab yourself some actual kanger addy's they will help tremendously, the gasket is bigger on the atty so it will "in theory wick better" working for me right now. I cant eliminate the 1/10 burnt tastes 100% but it helped ALOT.

 

[Wiztigg007]

Your over driving the wick.....
I use 40/60 and take lung hits. I run 7.0 watts or 3.9V over a 2.2ohm coil.
I had the same problem. I remove 1 of the wicks sometimes both and give it about 2-3 priming draws before I fire it. Kind of a PITA but it dose the trick. As you get about 1/3 full you will feel a bit of a gurgle so back off the priming hits so you don't flood the coil. Its kind of a "by feel" thing. If you do flood take the tip off and let it drain for a minuet or to then back in business.
Don't fire it more then 2 draws in a row or you will get a burn. let it rest 30 seconds after you fire and you should be good to go....

 

[Wiztigg007]

Oh and don't forget to rinse your coil after a tank or to got get out any burn juice under the chimney, re-prime your wicks with a drop of juice on both sides and 3 drips down the chimney, let it sit for 5-10 min and Vape On!!!!!

 

[Wiztigg007]

I Use the same rig Dawg.......
Small world..... Hahahahahahahaah

 

[espkh123]

I never tried dripping down the center hole. Once I fix my leak I will. I filled it up and in 1 minute I had 2% of my juice in there. Rest was in a puddle