By Leo : Attys, mods, Drip-tips, tanks [CLOSED}

Status
Not open for further replies.

chadsmo

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2013
5,267
11,281
BC Canada
56168338-0D40-4007-923A-CB7332348C75-2524-0000027BD13CE205_zpsb9ff6da5.jpg


Ok so I think this the setup I'm gonna settle on for my Sofia for the foreseeable future.

Chi-Clone , Dbase short tank, Sofia and an external drip tip. 1ohm coil with cotton is perfect.
 

Billie-cig

Unregistered - Closed
ECF Veteran
May 16, 2013
2,572
9,263
Athens,Greece
www.byLeo.eu
I know some cleros use them, maybe just try to find a clero that uses the CE2 ceramic and grab a few of those ?

That would be the fastest way it think.This is a general problem for all. I will put spare cups in stock in a few days but that unfortunately doesn't solve your immediate problem :(
 

Akdare

Ultra Member
ECF Veteran
Verified Member
Sep 25, 2013
1,878
5,447
DFW, Texas
Ok...need some advice...I've got my Sophia in an SnP 22mm tank.
1.8 ohm Kanthal ready wire, when coiled at 1.4mm measured 1.6 ohms.
Cotton wick ala Mr. C's tutorial; just a wisp of cotton.
First tankful was amazing. I closed the juice control and refilled. Opened the juice control and she vaped fine until I got down to about 1/3 full. Then it began to taste burned, and the juice was noticeably darker. I sucked out the remaining juice, washed the tank and Sophia too. I removed the wick prior to washing, but did not notice any burned spots. The coil was still in good shape, so I dry burned it to get rid of any gunk. Vaping a very coil friendly 100% PG. Re wicked, primed with a couple of drops and reassembled. Again, when the tank goes to about 1/3, the burned taste comes back. I have not touched the voltage, vaping at a cool 3.7V on a Provari mini with a hippo v2.

The only thing I can think of is the juice control...too open, too closed, other ideas?


Sent from my iPad using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread