Bye Spinner. Full vaping 'kit', your thoughts, recommendation and help is appreciated.

[Chris K.]

Hello fellow vapers!

After a whole year using my Spinner / Aspire BDC, I decided its time to move on something more serious so I'm gonna nail it down for you, see if my new vape gear is decent enough to move on to the next level. Before that, I wanna mention, my purchases are a combinations of decent/good quality with as low budget as possible, since I cannot afford the original - way overpriced for me - even tho I wish I could..

A month of researching into forums, reviews, questions and all that, this is what I came up with.

rda
Quasar RDA Atomizer Clone by VapingTech (29€)
V/W Device
Sigelei 20w. (61€)
RTA
eXpromizer by exvape. (55€)
Mech mod
Black Copper Stingray Clone by Infinite - Preorder. (55€)
Charger
Nitecore Intellicharge I2. (12€)
Batteries
2x Panasonic NCR18650PF. (18€)

Considering that I wanted both a tank and a dripper and both a regulated device and a mech, all these are a "must".
Should I look for something else, your thoughts, opinions or anything, just let me know.
Last but not least, I have a question I need help with.
I'd like to try and play around 0.8 / 1.2 ohm coils, see hows that spot suits me so my concern is, I know these batteries are perfectly fine for my Sigelei 20w but will they work just as good on my mech or shall I check for something better, more Amps, safer etc ? If yes, any recommendation would be appreciated.

PS. ALL that vape gear is on its way to me from various vendors all over the world. VAPEMAILS!

Thanks in advance!

 

[vapo jam]

those batteries should be fine down to around 0.5 ohms on a mech (8.4 amp draw at full charge).

i'd say you're missing one thing: a good multimeter (or one of those resistance check boxes with the 510 connection). i know the sigelei has a built-in resistance checker, but when your safety is on the line, it's worth it to have a way to check the resistance that you know for sure is accurate.

 

[vapo jam]

and congrats on the new gear! pics to come?

 

[Chris K.]

Vapo! You're a genius, really! Ohm meter was one of these little things that I ALWAYS forget to order but was in the back of my head for weeks now. Thanks for your input!

Pics! Aww those pics. I'm thinking to gather all of these vape mails before opening, get a nice picture of them all together and then have some f u n!!! So yeah, it will happen!

 

[Topdogie01]

yep, it all looks good. just missing a multimeter unless you already have one. and some wire, and wicking material.

im really starting to like my Aqua tank (bottom dual coil rebuildable.) mine is original, but there is a clone one at fasttech for ~$20 (im horrible at currency conversion so you can do that math) i mention this because i see that you use a bottom dual coil tank now, and this would just be a rebuildable one. its something to look into if you like rebuilding. it has adjustable juice control, and adjustable air flow control

 

[Topdogie01]

possibly a magnifiying glass arm with a light to make it easier to see your coils when building them. maybe a drill bit set to wrap around?

 

[alarsen77]

The Sigelei 20w is a great device I love mine!

 

[Chris K.]

From what I've heard, it seems like Sigelei 20w is indeed a great device! Lets just hope it keeps on going on the long term!

Good advice there Topdogie, I already got a set of drill bit for my coils, can't wait to start wraping some. As for the light, my desk light projector should do the job. I am a night-favored guy (even if that makes any sense) so I'll be doing plenty of night work on these devices!

 

[Chris K.]

Question. Ohm box meter or Multimeter ? Pros / Cons ?

Thanks in advance!

 

[Topdogie01]

Multileter can aldo check battery voltage in a mod. Otherwise im not sure.

 

[RichM76]

It depends, one plus with a Mutimeter you could use it around the house for other uses or just dedicate to building your coils. It would also be a lot easier to purchase at a electronics store or big department store.