C.C.V. Now guarantees all carto purchases or your money back.
- Thread starter cmdryker
- Start date
- th_trl_thread_readers 0
-
- Tags
- resurrectors
- Status
Hi, CCV folks! Brand-new vaper here, looking for supplies for my Echo 1300mah PV. Just got it two days ago and already starting to stockpile stuff--
Went to your site and will be ordering juice, but will this work on my Echo?
"15 Clear Mega Dual coils (1.5 ohms)
Item Id: 37 "
I believe thats a 4.2 volt device not 3.7,and as long as the switch in it will carry a low resistance dual coil load you'll be fine. Dual coil draw more amps than single coil cartos,hince the problem the E-power is having and why it needs the new LR switch. And he's right if it's an 808 then you deffinately want the 808 "FUSION" Cartos,they are awesome !! Hope this helped you. Congrats on making the switch.
Originally Posted by cmdryker
can send it, but new switch should be here any day now, that way you get 2 switches, but if you want i can send out as is???
Andrew...Just letting you know that my E-Power arrived today! Thanks for all the extras! Good thing you did add the blue switches as the white one was a dud, but s far the blue is working. It vapes like a champ! Thank you so very much for going the extra mile! *hugs*
can send it, but new switch should be here any day now, that way you get 2 switches, but if you want i can send out as is???
Andrew...Just letting you know that my E-Power arrived today! Thanks for all the extras! Good thing you did add the blue switches as the white one was a dud, but s far the blue is working. It vapes like a champ! Thank you so very much for going the extra mile! *hugs*
Hi, CCV folks! Brand-new vaper here, looking for supplies for my Echo 1300mah PV. Just got it two days ago and already starting to stockpile stuff
Went to your site and will be ordering juice, but will this work on my Echo?
"15 Clear Mega Dual Coils (1.5 ohms)
Item Id: 37 "
Thanks for the info!
No.
If it's an Echo it is not a 510, it is a 808.
And if it is an Echo-E it is 510, but it will not work with anything under 2.0 ohms.
(And the voltage is not a factor whatsoever. Most all LIon e-cig batteries come off of the charger at around 4.2v unloaded. When a load is applied they drop very quickly to 3.7-3.8v unmodulated or are regulated with pulse modulation to 3.2-3.4v. [There are also 3.0v and 3.2v batteries in use, stacked, for higher voltage PVs.])
Last edited:
Hey Andrew, just wanted to say thanks for getting my order out promptly. You will always have me as a customer as long as I am a vaper.
white switch is probably turned off,,,,,, click fast 5 times see if it turns on.
Oh, so sad! Dropped my pv in the parking lot and chipped the new purple drip tip!
I guess that means I have to place another order soon...stockpile Resurrectors for a new purple drip tip, lol! Really debating the bolt, too. I like a cylinder pv for work and the egos are getting older but I don't want to buy more proprietary batts- Andrew, do you plan to stock the extender for the Bolts so they can hold a 18650? Not a deal breaker, but a consideration.
I guess that means I have to place another order soon...stockpile Resurrectors for a new purple drip tip, lol! Really debating the bolt, too. I like a cylinder pv for work and the egos are getting older but I don't want to buy more proprietary batts- Andrew, do you plan to stock the extender for the Bolts so they can hold a 18650? Not a deal breaker, but a consideration.
I believe thats a 4.2 volt device not 3.7,and as long as the switch in it will carry a low resistance dual coil load you'll be fine. Dual coil draw more amps than single coil cartos,hince the problem the E-power is having and why it needs the new LR switch. And he's right if it's an 808 then you definately want the 808 "FUSION" Cartos,they are awesome !! Hope this helped you. Congrats on making the switch.
Fusion cartos have 801 threads. Not 808.
My guess is he was speaking of MaxxFusion (Bloog) style cartos, not Fusion (IKV) cartos.
I would like that option too, for the 18650 batteries since I already have them.
After 24 days my order arrived this morning. Now to go load up a few cartos and try out my new drip tips. Thanks Andrew!!
Better late than never I guess. LOL 24 days is a long time.
I ordered on the 25th and got it yesterday the 26th. Good to see CCV is back to form. Granted I'm only 30 miles away from CCV and live within spitting distance of the Hazelwood sorting center ( which I do on a regular basis).
So the new E-power switches were not sent out before the Chinese New Year? I thought you said last week that you were expecting to get them in a few days? I know its not your guys fault, I just want to get onee. Another vendor, which I would never name on here, already has them for sale and its making me even more ansy to get one! The new switch has a Blue LED and is rated to use 1.5ohm and up like the old Blue LED switch was, but it also now has the 5-click on/off feature that the white LED switch had. My buddy already got one and said it works flawlessly with the Ressurectors and the 1.5ohm E-Power dual coils. It looks like Smoktech finally got the switch right which is why Im itchin to get one! Ive been holding out from ordering one all week bc Id rather get it from you guys to give you the business, and not only would I have to pay for shipping if I got it somewhere else, but you guys also sell it for cheaper as well. Ive been checking the site everyday hoping to see it say in stock but I guess it wont be available for alittle if it still hasnt been shipped bc of the stupid chinese new year. ha, again I know its not your guys fault at all and Im just being impatient. I am willing to wait till you guys get them, so any info you can give on an ETA would be much appreciated.
Thanks guys!
Thanks guys!
Thank you mudflap I meant to type 801 fusion, I had just read a article on 808 cartos and I guess it was stuck in the memory cells. Thanks for the correction.
I tried that, the second time I tried, the button fell inside the switch unit as if there was nothing behind it to hold it in place.
- Status
Similar threads
- Locked
- Locked
