Can I dilute a premixed 100% VG liquid?

[ResinBalls]

I want to know if it's possible to dilute a premixed 100% VG e liquid, by just adding water or PGA. I just got my eGo-c, and I want to use a specific flavor that is 100% VG, and have read in numerous threads, forums, etc., that the 100% VG doesn't wick fast enough, causing the drags to be dry and burnt tasting. I know there are better ways, I've never actually mixed my own liquid, and right now money is tight, so the distilled water would be the most cost effective for me. Any input is appreciated.

 

[steliosak]

Yes you could 5-10% distilled water should be fine.

 

[AzPlumber]

Just be careful, some vendors already thin all VG liquids and you don't want it too thin. Also keep in mind that VG will flow much easier as it gets warmer. If you feel the need to thin it a bit start with 5% DW.

 

[Mr. P]

You mentioned pr-mix, if it already has flavor added in or nic you will be reducing the flavor and/or nic amount with the more DW you add. In other words it may dilute the flavor and TH.

 

[niczgreat]

I just started in DIY and my bottle of Everpure 190 arrived after everything else.
So I thinned my first batch with filtered water. It worked just fine.
I'm using 100% 36mg VG from RTS Vapes, with some of the flavorings containing PG.

After my Everpure arrived, I used that for thinning. Worked fine too. I didn't really notice a difference.

So if on a budget don't worry just use filtered water or distilled water.

 

[MrBeo]

Well asuming its a 100% vg and nothing else added you can do 5% DW then if still too thick work it down from there 1% at a time! Good Luck...