Can't assemble the base :-|

[booker]

Heya,

What I done, was trying to check how replacing the centre pole o-rings works, but for some reason I endup with the plastic thing stuck to the brass polygonal screw.

I guess I need them separate because those two small o-rings go between them right?

I have no idea how to separate them now. Or maybe I need to do something else?

Help me

Cheers

 

[imeothanasis]

How do those tiny o-rings got out buddy?

 

[MrNYFC]

I'm guessing you want to put your cap back together?

Here is a video made by Rob @ VK on how to reassemble the first generation GGTS cap, and it looks to be similar to the new one:

YouTube - Re-installing or replacing GGTS center pin o-rings

 

[booker]

How do those tiny o-rings got out buddy?

I got them out myself of-course, coz I wanted to see

I'm a very bad customer - I usually dissemble everything

Anyways! I got it. I screwed the brass screw slowly a bit hard into the base, and then I used one fast move to unscrew it.

As the result the plastic is now again at the proper place!

Thanks very much for looking here so quick my good friend Imeo!

 

[booker]

I'm guessing you want to put your cap back together?

Here is a video made by Rob @ VK on how to reassemble the first generation GGTS cap, and it looks to be similar to the new one:

Yeah, but you can't do it with the plastic cover stuck on the polygonal screw ;D

Cheers for looking here.

 

[imeothanasis]

I got them out myself of-course, coz I wanted to see

I'm a very bad customer - I usually dissemble everything

Anyways! I got it. I screwed the brass screw slowly a bit hard into the base, and then I used one fast move to unscrew it.

As the result the plastic is now again at the proper place!

Thanks very much for looking here so quick my good friend Imeo!

I am trying booker my friend

 

[booker]

I believe everyone appreciate that a lot, my good friend.

 

[T-Hefner]

This may be one of the BEST parts bout being a GG E-cig user........

When ya have an issue whatever the issue may be...No matter how big or how small.....Someone is always here to help.....and Imeo is usually here himself to help..witch to me, is one of the BEST things bout being a GG user....It really is a beautiful thing....

-Tim

 

[keon718nyc]

The only problem i ran into and caused it myself was pulling out the connector pin, The 2 washers came out and i tried to stuff back in and didnt put them in correctly which caused a leak down the pin to the batteries and broke a ring in the process. This video will help me repair the problem i caused. Lucky i have some replacement orings for the pins and this video lol, I swapped my other collector tank i had and no problem. Try not to take the pin out all the way to avoid having to put o rings back into place. Hope this helps some~