AFS trick

[emonty]

then we need bigger hole for the regular ones. Ok, I will check it myself when time comes. Thanks again

sorry can't check it as I don't have them anymore. I had one and I noticed that threading on the brass connector was very difficult or impossible

 

[imeothanasis]

sorry can't check it as I don't have them anymore. I had one and I noticed that threading on the brass connector was very difficult or impossible

My old cartomizers that Lisa had send me before 3 months fit very good there. But ok, I will make universal 901 threads next time

 

[emonty]

My old cartomizers that Lisa had send me before 3 months fit very good there. But ok, I will make universal 901 threads next time

great Imeo, thank you!!!

 

[WetStick]

I've never used a cartomizer, so I'm not sure best place to get one that will have the right threads. I'd like to try this, though. Anyone have a recommendation(s) on a good source?

 

[WetStick]

I am very sorry about wife pal, please give her my best wishes

Thank you, I really appriciate that.

 

[T-Hefner]

I never really got into cartomizers.... I hear good things and bad things...I really gotta get around to checking them out.....

-Tim

 

[Wafflestomper]

I never really got into cartomizers.... I hear good things and bad things...I really gotta get around to checking them out.....

-Tim

You gotta try the carts in the AFS Hef. My wife and I were driving to dinner, and when I went to show her... she had to roll the window down because we were blinded by all the vapor hehe.

You put something like waffle juice in there, and its even worse.

 

[boomboom]

Emonty recommends the Turbo Cartos from Vapornine.

 

[WetStick]

Emonty recommends the Turbo Cartos from Vapornine.

Yea, I did see that post. I should have ask the question differently; but, I thought I'd get a couple other sources than VaporNine. They are out of stock on the one that I think is the right one.

I should have asked: "Do I order the KR808 or 801 format?" They have both under their Turbo classification.

I've only used 510 format in the 14 months that I've been doing this, up until I received my GGTS. So, I'm not familiar with the other formats that can fit the 901 threads. I have limited personal time on the computer, these days. So, I didn't try to research it. (I know that info is available here, somewhere)

I'm assuming that it's the KR808, and they're out of stock on their blank carto's (probably because of this forum thread). The 801 doesn't look right from their photos.

So, after all that.... Is the correct Carto format the 808; and does anyone recommend another source, other than Vapornine. (I guess at the very worse, I'll order a flavored one)

Thanks, in advance....

 

[emonty]

Yea, I did see that post. I should have ask the question differently; but, I thought I'd get a couple other sources than VaporNine. They are out of stock on the one that I think is the right one.

I should have asked: "Do I order the KR808 or 801 format?" They have both under their Turbo classification.

I've only used 510 format in the 14 months that I've been doing this, up until I received my GGTS. So, I'm not familiar with the other formats that can fit the 901 threads. I have limited personal time on the computer, these days. So, I didn't try to research it. (I know that info is available here, somewhere)

I'm assuming that it's the KR808, and they're out of stock on their blank carto's (probably because of this forum thread). The 801 doesn't look right from their photos.

get a flavored one, same price ;-)

So, after all that.... Is the correct Carto format the 808; and does anyone recommend another source, other than Vapornine. (I guess at the very worse, I'll order a flavored one)

Thanks, in advance....

get the flavored one's same cart, same price.

 

[Mist_Of_Joye]

It's been a while that I was thinking about but if the AFS V2 shall be the final version, which I don't doubt, and since the holes on the atomizers are now big enough and can be perforated easier than the ones on the previous Iatties then what Imeo needs to invent now is....The Iperforator!!

It's a special little manual tool, that has two strong hands like casual pliers, and that has a tube inside which we put the atomizers. When we press the hands together, a huge force pushes a metal piece that perforates the atomizer.

I want my Iperforator now!

 

[emonty]

It's been a while that I was thinking about but if the AFS V2 shall be the final version, which I don't doubt, and since the wholes on the atomizers are now big enough and can be perforated easier than the ones on the previous Iatties then what Imeo needs to invent now is....The Iperforator!!

It's a special little manual tool, that has two strong hands like casual pliers, and that has a tube inside which we put the atomizers. When we press the hands together, a huge force pushes a metal piece that perforates the atomizer.

I want my Iperforator now!

and I want to take home your Avatar

 

[wood_510]

I second that Emonty!!!

 

[Mist_Of_Joye]

Me too...I want...hehe

 

[boomboom]

It's been a while that I was thinking about but if the AFS V2 shall be the final version, which I don't doubt, and since the holes on the atomizers are now big enough and can be perforated easier than the ones on the previous Iatties then what Imeo needs to invent now is....The Iperforator!!

It's a special little manual tool, that has two strong hands like casual pliers, and that has a tube inside which we put the atomizers. When we press the hands together, a huge force pushes a metal piece that perforates the atomizer.

I want my Iperforator now!

Great idea!!!!!!!

 

[imeothanasis]

it's been a while that i was thinking about but if the afs v2 shall be the final version, which i don't doubt, and since the holes on the atomizers are now big enough and can be perforated easier than the ones on the previous iatties then what imeo needs to invent now is....the iperforator!!

It's a special little manual tool, that has two strong hands like casual pliers, and that has a tube inside which we put the atomizers. When we press the hands together, a huge force pushes a metal piece that perforates the atomizer.

I want my iperforator now!

:d:d:d:d:d:d:d

 

[clyde2801]

and I want to take home your Avatar

Kinda brings a whole new meaning to the phrase 'peace in the middle east', don't it?

 

[Mist_Of_Joye]

Kinda brings a whole new meaning to the phrase 'peace in the middle east', don't it?

I'd love to have that piece... in the Middle-East ... and everywhere in the galaxy too

She's coming to Lebanon soon...I'll try to see her and will then post some pictures

 

[Wafflestomper]

Kinda brings a whole new meaning to the phrase 'peace in the middle east', don't it?

Excuse me now, I need a moment alone.

 

[tokes]

My GGTS, #367, came with the small cap Oring already removed. After reading this thread I removed the other ring at the bottom. The result was a visible increase of vapor and a smoother feeling to the draw.

Thanks!