Can't Find

[DanR]

I have looked high and low for a certain mesh coil. What I'm looking for is KA1 mesh 18*6.2.0.1mm. If anyone sees them or know where I can get them, please let me know.
Thanks
Dan

 

[Fidola13]

What atty are they for?

 

[DanR]

It's for my Geekvape ZXII rta

 

[AvaOrchid]

It is an odd size so unless you find it like specifically made for that you're going to have to trim it and if you have to trim it anyway the easiest that I have found to trim is going to be the vandy vape mesh spool. I mean I guess any other mesh spool would be fine But I'm actually a really big fan of the vandy vape It's a much thinner mesh like you can't really see big holes in between and honestly I feel like it works better but I am a lower wattage vapor so that might be why I like it better because I can get away with only using 25 30 watts. It's been a while since I used it so I'm not sure if I have to trim both directions but it doesn't fall apart when you trim it and that's a really big bonus

 

[DanR]

I thank you all for your suggestions, but I've decided to get a roll of the stuff. I've read "AvaOrchid" on what he/she does about trimming it and I'll see when it get's here how it goes. I to am a low watt guy as I also vape around 25 to 30 watts. I love it. Again thank you.

 

[AvaOrchid]

I thank you all for your suggestions, but I've decided to get a roll of the stuff. I've read "AvaOrchid" on what he/she does about trimming it and I'll see when it get's here how it goes. I to am a low watt guy as I also vape around 25 to 30 watts. I love it. Again thank you.

When it comes in do not hesitate to tag me get me back in the conversation and I can help you out. It's been a little while since I've used it on that exact RTA but I will absolutely do a little build so I can give you fresh tips when you get the product But I don't think you're going to have too much trouble

 

[DanR]

I thank you for the help and once I do get in the mesh, I'll try it myself first and let you know how I did.
Thanks
From SC.

 

[BillW50]

Same size as the Zeus X Mesh. HealthCabin used to have them. Do you like Ni80 mesh? I think I have about 100 packs (2 mesh per pack) left and I discovered I don't like Ni80 mesh. I have over 100 packs of Kanthal mesh left too, which I do like very much.

UPDATE: Are you sure they are 18mm long? Because I believe the Zeus X Mesh are 16mm long.

 

[BillW50]

MyVPro still has Zeus X Mesh in stock for $3.99.