Cart resuage and atty cleaning

[Metadeath]

I was wondering, i know you can reuse the cart, but how od you go about flushing the old flavor out the stuffing and the cart itself?

Also whats the best way to clean an atty without having to wait and entire day for it to dry BUT get all the gunk out of the atty?

 

[WomanOfHeart]

My Atty Resurrection Method will walk you right through getting the atty clean and ready to use in about 15 minutes or so.

You can get the extra juice out of the filler by sticking the filler into a syringe and using the plunger to push out the juice. Then you can either rinse it in some hot water or stick it in some Isopropyl Alcohol for 5 or 10 minutes until all the oil leeches out of it. Squeeze out the IA and let it air dry. You'll know when it's done because it won't smell anymore. If you're in a hurry, you can always just hold it under a hair dryer.

 

[DC2]

This is something I put together regarding atomizer cleaning...
http://www.e-cigarette-forum.com/fo...ion/97014-facts-about-cleaning-atomizers.html

And by the way, it does include the method linked above, for use when needed.

 

[DC2]

As for cleaning the cart, do you mean cartridge or cartomizer?

 

[AttyPops]

I use this:

YouTube - E-Cigarette Atomizer Maintenance

If I don't want to or can't wait to let it dry, I do the following:

<after cleaning as above>
1) Blow out any remaining ISO Alchohol. Use a good full breath of air. Repeat.
2) Put the atty on a manual battery and heat the atty a bit. Not like a dry burn, just warm it. DON'T burn it out.
3) Drip a couple drops of PG or VG in it (use juice if you don't have the plain stuff). Blow it out.
4) Add juice. Vape. Don't inhale... check if you taste any alcohol (you probably won't). Blow-out/ no-inhale-vape adding juice as needed till ISO Alcohol taste is gone.

Good to go.

As for cart stuffing, if I'm out of new stuff, I remove it, wash it out. Dry in paper towel. Put back in. Otherwise, replace it.