Carto/Atty Life: Is VG my issue?

[TennDave]

Okay, Although the DID looks interesting, my understanding (looking at different reviews) is that it still has to have the "tank" for it to work- It has a center post that has to be attached through the tank (that has male threaded connections at both ends) to the battery end and the atty end. The actual atty part of the atty that we would be interested in on a Reo has female threading (and its diameter looks very large), so unless you can get a very short male-to male adapter, I see no way that this can work on a Reo. Even if you can, I'm thinking it would be to large for the juice well on any Reo. Correct me if I'm wrong.

 

[Tonytiger1]

Okay, Although the DID looks interesting, my understanding (looking at different reviews) is that it still has to have the "tank" for it to work- It has a center post that has to be attached through the tank (that has male threaded connections at both ends) to the battery end and the atty end. The actual atty part of the atty that we would be interested in on a Reo has female threading (and its diameter looks very large), so unless you can get a very short male-to male adapter, I see no way that this can work on a Reo. Even if you can, I'm thinking it would be to large for the juice well on any Reo. Correct me if I'm wrong.

It's a 510 connector. Use a mechanical mod 18650 is best There is nothing like a genisis. If not now you will get one later after spending way more. Most learn the hard way.

Tony

 

[Technonut]

It's a 510 connector. Use a mechanical mod 18650 is best There is nothing like a genisis. If not now you will get one later after spending way more. Most learn the hard way.


Tony

I have a few high-dollar Genny's sitting around since I've been using my ERA BF RBA. I used it on a BF box mod for awhile before my VV Grand arrived last week. I'm using 3mm Silica wick, and I'm getting better flavor & vapor production than any of my SS mesh Genny's.. (And yes, I've been building SS mesh wicks / coils since they were first available, and can build a good one ) Also, the REO's are BF devices, which just are not made for Genesis attys...

I will still use my Genny's from time to time with my tube mods.... Because being an "International Modaholic" is how I roll...

 

[Tonytiger1]

I have a few high-dollar Genny's sitting around since I've been using my ERA BF RBA. I used it on a BF box mod for awhile before my VV Grand arrived last week. I'm using 3mm Silica wick, and I'm getting better flavor & vapor production than any of my SS mesh Genny's.. (And yes, I've been building SS mesh wicks / coils since they were first available, and can build a good one ) Also, the REO's are BF devices, which just are not made for Genesis attys...

I will still use my Genny's from time to time with my tube mods.... Because being an "International Modaholic" is how I roll...

That's hard core. The average person is just replacing smoking. That why isaid get off the carts.


Tony

 

[nerak]

Get a new Rebuildable atty from the Reosmods site. Only pennies to get a new coil/wick when it needs replaced.

These are made FOR the REO's. No tank needed!!!!

I use juices 100%VG and they are pretty dark. No problems with my attys.

This Reomizer Rebuildable will allow you to have a brand new coil whenever you choose!

 

[FAAmecanic]

I don't run standard atomizers anymore but when I did I would get the atomizer hot remove it from my mod and blow out the hot juice into a napkin .This would bring the flavor back and remove any buildup up in the atomizer. I would do this every 2 or 3 days

That makes sense...the best solvent most of the time is the same stuff you run through it and using the atty to heat it up first. Gotta try this.