The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

CARTOMATOR cartomizer Tank System NOW IN STOCK!!!!

Discussion in 'Nhaler' started by Drewsworld, Jul 22, 2011.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. strprswpr

    strprswpr Vaping Master Verified Member ECF Veteran

    Apr 29, 2011
    Bronx, NY
    I got my tank today and I like it. I have one question...Looking at the cartos I see the holes drilled.....There doesn't seem to be any rhyme or reason to the layout of the holes. Everyone is different. I guess where the holes are placed doesn't matter? Some of the cartos have holes drilled one right next to the other. The tank fits tight....thither than others I've tried.....which I like very much.
     
  2. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA
    I am anally retentive and it drives me insane when the holes aren't drilled across from each other in a 12/6 pattern. But from a technical sense, it doesn't matter whatsoever. I did eventually catch the random drilling and made them conform...lol!
    It was a risk going tighter, but the extreme looseness was something that bothered me on the competitors tanks and I wanted something a little firmer. Glad it seems to be well received.
     
  3. strprswpr

    strprswpr Vaping Master Verified Member ECF Veteran

    Apr 29, 2011
    Bronx, NY
    The only thing that concerns me about the holes not being at least opposite each other is the the juice won't fill on one side of the carto....and yes I'm a little anal as well. I would've liked to see the hole opposite one and other as well as the same height from the bottom of the carto. Not to be a pain but you are charging double what a Boge costs normally. Get on the guys drilling those things. I guess it's really not that important.
     
  4. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA
    It doesn't affect performance since the carto fills with fluid at a fixed rate, but aesthetically it bothers me. Most people don't think about the number of new things that are introduced to workers when a new product is rolled out, but once everything becomes more of a routine, these type of things get smoothed out. I agree though...it shouldn't happen in the first place.
     
  5. strprswpr

    strprswpr Vaping Master Verified Member ECF Veteran

    Apr 29, 2011
    Bronx, NY
    I still like the product....Nice tight fit. Definitely a plus to your tank. Now how about some smoke colored tanks?
     
  6. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA

    I spoke to my vendor yesterday and he placed me on the waiting list for Dark Grey and Two different shades of black. Get this....The reason for the demand in these colors? Sunglasses! Bausch and Lomb, Oakley and a few others buy up all of the brand name tinted sheet products in these colors. you wouldn't think we are a sheet product, but this tubing starts as a sheet product I guess. Anyway, the short answer is, he said we could get one or the other or both in 10-21 days.
     
  7. andel11

    andel11 Ultra Member Verified Member ECF Veteran

    Mar 27, 2009
    Bay Area, Ca
    My comparison to this Cartomator to others out there.
    I had bought a Liquidiator Cart Tank, got that before the Cartomator came out. I though what a great idea and I have over like 50 carts, now is the time to make use of them. Tried both- Liquidiator Tank-well it is too loose, leaks, spins and slides to much for me. Tried Cuseguy Cartomator and there's no comparison. Tight seal, no leakage or spinning and the TH is great.
    Well No more Liquidator Tanks for me. You have hit the mark CS. Believe me I haven't vaped on anything else since I changed the cart on this tank not even your VPX CE2 tanks, thats how sold I am on them. CS you know I going to get some more these in the future( just waiting for some more colors) Now I will just wait on you to bring out the best products.(waiting for the atty in the tank as the next new toy)so get going. Haha
     
  8. thorn

    thorn Ultra Member ECF Veteran

    Mar 22, 2010
    TX, USA
    I watched the videos. Is there always parts of the carto that sticks out from the tank (both lengths?)? Does the tank completely empty to where I can put in another flavor without worry of them mixing or is there some liquid left in the tank that must be wasted?
     
  9. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA
    Only the carto connector sticks out at all. The Drip-Tip side of the carto is flush with the cap or very close to it.
    Sure the tank will completely empty, but then you have to remember that the carto is still full also. So you need to vape that dry also. Switching flavors can be done in the same carto. But, I usually use a different carto per flavor. And this tank makes the carto swap so easy.
     
  10. strprswpr

    strprswpr Vaping Master Verified Member ECF Veteran

    Apr 29, 2011
    Bronx, NY
    Cuse, how do you guys cut the hole in the carto. It's obvious that your not punching them because I see no deformity in the carto. Are you guys using a drill press or a mill? The reason I ask is I have a mill and was thinking about trying a few. 3/32" hole? Or larger. Are you taking any steps to prevent the filings from getting in the carto. I figured a vacuum while milling the hole. Any suggestions?
     
  11. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA
    We do it on a mill with a series of self-centering cradle jigs that we milled specifically for the job. Yes, we have a vac system to pull the filings away. But It could be done on any drill press using the depth adjustment, with a vise and some sort of jaw guards. But the mill allows us to set up multiple cartos at one time and use a simple cnc program to run 5 cartos at a time, rotate them and run the 2nd hole.
    Boges do not seem sensitive to hole size or number, so anything within reason of say... 1/8" is good. Dual-Coils can be funny and we are happy with just one 3/32" hole.
     
  12. jed

    jed Super Member Verified Member ECF Veteran

    Dec 17, 2010
    NW NJ
    in 2nd video he mentions a drill press and jig, wonder if those without either could go along these lines with a Drill Guide Attachment, theoretically should work but not sure how accurate

    wolfcraft drill guide manual


    edit: dang cuse you are too quick!!
     
  13. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA
    You could probably use that. I don't see why not. We did start by doing them on a regular Drill Press, but for our purposes, it was very slow. But for home use, any method that you can drill the holes safely, should work fine.


    Sent from my iPhone 4 using Tapatalk
     
  14. strprswpr

    strprswpr Vaping Master Verified Member ECF Veteran

    Apr 29, 2011
    Bronx, NY
    I tried a while back using a hand drill and it was difficult to hold....not to mention your drilling through stainless. I'm gonna try a few on my mill. See how they work out.
     
  15. iBANKAI

    iBANKAI Super Member Verified Member ECF Veteran

    Oct 22, 2010
    Hawaii
    drilling at home seems kinda tough..the slotted version seem a lil easier..can't wait for mines to get..
     
  16. cuseguy

    cuseguy Ultra Member ECF Veteran

    Dec 15, 2010
    Texas USA
    Slotting, dotting, punching.....they all work!
     
  17. Drewsworld

    Drewsworld Resting In Peace

    Mar 14, 2009
    New Jersey
    Ok, we have been dotting and punching all day and we have some additions!!!!
    MF Style Kr808 Horizontal coil cartos in regular and Xl Size...These are the dripper style and work great with normal 3.7 volt batteries. Ive been using them on a KR808 manual battery all day and they are working great.
    The Xls can be used in the Mini Tank with no drip tip and have plenty of room to move around. I think I like these the best so far.

    Also Triple Coil XL 1.5 Ohm cartomizers. Now I wont reccomend these for regular batts but they are singin on the Darwin and other 18650 High Drain battery mods.

    All other sizes are now also stocked up. Check them out.

    Pre-Dotted Cartomizers for VPX Cartomator Tanks
     
  18. Krisb

    Krisb Ultra Member ECF Veteran

    Sep 25, 2010
    OH
    You spoil us, Drew :)

    Sent from my ADR6300 using Tapatalk
     
  19. andel11

    andel11 Ultra Member Verified Member ECF Veteran

    Mar 27, 2009
    Bay Area, Ca
    So Drew

    If using the MF Style Kr808 for the tank, we should get the XL and not the regular. Is that right?
     
  20. thorn

    thorn Ultra Member ECF Veteran

    Mar 22, 2010
    TX, USA
    The VPX picture has 6 of the 7 colors. Do you have a comparison pic so we can see the orange next to the other colors?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice