Cartos

[Mobius_13]

Hey guys. I was wondering which Ikenvape cartomizers that are good in the infinity? Im getting tired of paying $7-8 for an atomizer that dies or stops working properly after a week or two. Also whats the best way to fill them?

Sent from my Galaxy S using Tapatalk

 

[BuzzKill]

5CS this is your area of expertise !

IU have been using the CE2 R4 cartos on mine , Ikenvape has some that many around here like .

 

[Bluzeman]

I don't know about Ikenvapes, as I've never used them but I have been using 5 ohm cartomizers for a week now, and love them. I can crank the Infinity all the way up, and get massive taste and throat hit, with nice warm vapor. Very easy to fill, just take off the rubber piece on the top and fill.

Got them from madvapes. Sorry, I know you asked about Ikenvapes, so can't help you there, but I'm totally sold on the 5 ohm ones. YMMV.

 

[Bovinia]

I love Iken's Fusions on my Buzz but unfortunately the 2.5Ω internal resistance is pushing the limit on the Infinity The Infinity Pro shouldn't have this problem, but with the first run Infinity, I stick with 3.x ohm boges.

Hopefully someone else can give you more ideas.

 

[BuzzKill]

I don't know about Ikenvapes, as I've never used them but I have been using 5 ohm cartomizers for a week now, and love them. I can crank the Infinity all the way up, and get massive taste and throat hit, with nice warm vapor. Very easy to fill, just take off the rubber piece on the top and fill.

Got them from madvapes. Sorry, I know you asked about Ikenvapes, so can't help you there, but I'm totally sold on the 5 ohm ones. YMMV.

Really 5 ohmers ?? so you are at 5.5 volts at 5 ohms or 6 watts , well maybe 6 volts ??? and 7.2 watts .

 

[Bluzeman]

LOL! Whatever the Infinity puts out, it's cranking these 5 ohm cartomizers just great! I don't know, I guess I should put them on a meter, but man, it's just an awesome vape!

They're on Madvapes site, I posted something here, right after I got them. The only time I put the infinity on a VOM I think it was just short of 6 volts.

 

[Wharf Rat]

Mob I've used the 510 V2 and the Fusions. Both are 2.5Ω and I think I've only had a problem with one tripping the protection. They are best best two carto's I've ever used and I'd give a slight nod to the Fusions. I did have about 15% failure rate on the 510's. However I found that very acceptable as they are 10-30¢ cheaper than other 510 or 808's I was buying before and far superior IMO.

 

[Mobius_13]

Well I dont have to get Ikenvape. Just thought I saw people talking about them on here. Must have been buzz users. Ive been using the hv 510 attys from ikv and like them but they dont seem to hold up long. So really any good carto for the infinity is what im looking for. Just a cheaper solution compaired to attys I guess. Ill check out the ones at madvapes. Any other sugestions? Thanks.

Sent from my Galaxy S using Tapatalk

 

[Mobius_13]

Thanks wharf. Ill check em out.

Sent from my Galaxy S using Tapatalk

 

[5cardstud]

I see Wharf answered you.
I do love the fusion's but have had probs on the Infinity. Wharf could be using better juice than me.

 

[Mobius_13]

Guess I should have mentioned I have a 510 connection. Sorry about that.

Sent from my Galaxy S using Tapatalk

 

[5cardstud]

Well I do too but I use adapters because I vape 808,801,510, and once in a blue moon even a 901.

 

[Ruppy]

The Ikenvape Mega 808 Standards work VERY well on the infinity. When I have a carto on the infinity thats what it is.

I THINK he makes the same cartos in a 510 now. 5card might know for sure

 

[5cardstud]

The Ikenvape Mega 808 Standards work VERY well on the infinity. When I have a carto on the infinity thats what it is.

I THINK he makes the same cartos in a 510 now. 5card might know for sure

Yes he does and those are both great cartos for the Infinity. Of course you would have to use an adapter for the 808 but the 510 is the same carto.

 

[Mobius_13]

I got some plat v2s (only a buck each) and some mega standards. Thanks for all the sugestions.

Sent from my Galaxy S using Tapatalk

 

[Bovinia]

Great Mob, hope they work out for you.

 

[5cardstud]

I got some plat v2s (only a buck each) and some mega standards. Thanks for all the sugestions.

Sent from my Galaxy S using Tapatalk

I've used them on the Infinity too and for about a day or so okay then the same problem, not quite as bad though. You have to keep the post up on them and the post area dry plus don't tighten them down and push the post up. He uses thin isolators is the only thing I can thin k of but I'm going to cut a few apart one day and find out.
The Boge Cartomizers are a great cartomizer on the Infinity.

 

[catcat]

I tried one gold v2 from IKV...but it tastes burnt on my infinity. I got the 510 megas for my ego...but they work on the infinity? Okay..remind me how low of ohm I can safely go on the infinity...please? I may just have more carts here than I am aware of that I can safely use on my infinity. I got my first order of fusions, too....but they don't seem to want to absorb the liquid much after about 3 or 4 refills. I vape about 3 mils a day.

 

[Bovinia]

Cath, for best results on the Infinity you want to go with 2.8ohm or higher. Some people are using the Fusions on the Infinity with no problems (they have an internal resistance of 2.5) but I personally only use 3.0 or a little higher on my Infinity. With Iken's cartos you really need to let them soak for about 30 mins on the first fill.

I use the Fusions on my Buzz but I don't care much for the V2 golds, that's just my taste tho. On Iken's site the mega 510s are listed as LR but I don't see an actual ohm rating. It won't damage your Infinity, it would just trip the over current protection if the resistance is too low.

 

[Wharf Rat]

I tried one gold v2 from IKV...but it tastes burnt on my infinity. I got the 510 megas for my ego...but they work on the infinity? Okay..remind me how low of ohm I can safely go on the infinity...please? I may just have more carts here than I am aware of that I can safely use on my infinity. I got my first order of fusions, too....but they don't seem to want to absorb the liquid much after about 3 or 4 refills. I vape about 3 mils a day.

They have two mega's LR and SR, do you know which one you ordered? You can Look at your order history if not? If the V2 taste burnt, did you let it soak 30 minutes before using? I always (almost) start at 3.8-4.0v with either the V2 of Fusions, them work up to 4.4-4.7v.
I have the same issues with the Fusions and posted earlier they last me 2-4 days. Well sure enough, after that post I have one now that at day 4 it just kicked in to second gear and is vaping like a champ........ go figure!!!

BTW I use both on my ∞