Catfish atty mods.

Status
Not open for further replies.

beckdg

ECF Guru
ECF Veteran
Verified Member
Oct 1, 2013
11,018
35,706
TN
Thanks Fairtradesloth, oh and love that Wakonda and the Virus! I know an RM4 is Atomic clone ( have a chart someplace) and the RM3 I believe is an A6. Found a thread over in Reoville on compatible rda's and am looking them up as I go. It's hard to get the height of some of these rda's cause sometimes that's the spec they leave out and of course whether you are using an aftermarket tip or not changes things. I didn't get a REO for a longtime because I thought it was too big, till I saw a video from Russ showing the visual with the sizes. I have small hands but the Mini capacity of only 3mls seemed too small.
I'm a small atty guy, myself. I absolutely love my v2 hobo and my nuppin'.

Tapatyped
 

X-Puppy

Cloud Hound!
ECF Veteran
Verified Member
Sep 13, 2013
2,262
12,612
Marysville, Washington, USA
A reactor if you can get one. I'm a big atty guy but the Reactor still hits the spot for me.

Kinda reminds me of Men In Black where Tommy Lee Jones gives Will Smith the small alien gun while Tommy Lee gets the big one. That small gun puts out an unexpectedly big boom!

Once you get the air dialed in, there's just something special about the reactor. Big tasty clouds from a tiny atty. It's just big enough in diameter that you still need the LP catch cup to run it.

Still my every morning favorite Vape. I have a pile of atty's already but the day chowder puts up an AFC reactor... I will order 3! :)
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
I like 'em small...but LOW, that's another challenge. I think ya gotta go Derringer for low.
But here's my small collection, so you can see them sizewize.
I've also got an ERA that didn't make the photo.
For duals and airflow, out of what you see here, I think RM4 isn't a bad fit.
If "small" or "flavor" is most important, not AFC or duals, you might want to grab a PDA or Hornet now, while Chowder's got 'em!!

collection2_zps527bf249.jpg

standing up: Divo, Cyclone, Cyclone/AFC, Reactor, Atomic
 

brookj1986

Super Ultra Member
ECF Veteran
Verified Member
Sep 24, 2013
1,842
4,071
Chicago, IL
Did you get a girl? Mine is a square like the original and so is my Ti that's in production now. I have 2 girls in 7068 aluminum one of which will be sent off for TiN coating. I just can't get behind the half roun half square concept; I require symmetry.

On a girl TMod the Derringer should look a lot better than it does on a square.
I got a tranny (i was thinking about just a girl as I prefer symmetry and love the shape of pekos. That said, the half rounded is so comfortable in the hand that I would not trade it for a full girl if I was paid. I'll probably get a full rounded at some point, but I love it half rounded.

cf599a904d3e914e81728388c69f9339.jpg
 

rudedog

Ultra Member
ECF Veteran
Verified Member
Apr 4, 2014
1,711
5,302
toledo ohio
is that the one of the classies?the mod maker sight has some nice stuff too.

addit:now that I caught up,i coulda saved this post,my mistake.nice lookin wood...lol.sounds so bad for a dude to be sayin..shesh,hah hah

So... I need to figure out which CH BF atty is going to look the best on this:

box-iroko-sx-350-50-w-265.jpg
 
Last edited:

Tbev

Unregistered Supplier
ECF Veteran
Oct 22, 2013
5,674
12,660
SoCal-Vegas
instagram.com
I got a tranny (i was thinking about just a girl as I prefer symmetry and love the shape of pekos. That said, the half rounded is so comfortable in the hand that I would not trade it for a full girl if I was paid. I'll probably get a full rounded at some point, but I love it half rounded.

cf599a904d3e914e81728388c69f9339.jpg
Lookin good!
 

mommabird62

squonkhead
Supporting Member
ECF Veteran
Verified Member
May 11, 2014
7,247
30,462
63
NC
I got a tranny (i was thinking about just a girl as I prefer symmetry and love the shape of pekos. That said, the half rounded is so comfortable in the hand that I would not trade it for a full girl if I was paid. I'll probably get a full rounded at some point, but I love it half rounded.

cf599a904d3e914e81728388c69f9339.jpg

Nice brookj! I am on the list for a brass one. One reason that I requested a tranny is that it looks like it would be easier for me to grip with my crappy arthritic hands. [emoji6]


Sent from my iPhone using Tapatalk with my paws :)

Mommabird62
 

brookj1986

Super Ultra Member
ECF Veteran
Verified Member
Sep 24, 2013
1,842
4,071
Chicago, IL
I think you'll like it. Very easy to grip, and the first 5 ml is super easy squonk. The last 5 ml you progressively need to push harder (to be expected when there's more air to liquid ratio). I think you'll be very pleasantly surprised with how easy it is to squonk and how fantastic the tranny grip is.
 

MFToms59

Ultra Member
ECF Veteran
Verified Member
Mar 19, 2012
1,547
3,842
Nevada
... I see a few pages back that a Reactor (is that a Reactor2/) and a Divo are on the small side. The option to do single or dual coils would be good and I certainly don't have a problem with reasonably priced authentic...

Thank you
Tracy

If you're looking for a small Atty you can put dual coils in, the Reactor is highly recommended, my CH modded Reactor is ~22mm high sans DT, ~16mm deck diameter, and has three posts for duals.

The Nuppin's quite small, a little bigger than an RM2, but nice small low profile little atty. They're not available right now but will be soon from pdib. Maybe something to look into and keep an eye on. I don't like it personally, but I'm a minority as most people absolutely love the Nuppin.

Not to start a war... even though I own and enjoy one, I refrain from mentioning other atties on this B-F Atty Modder's Thread out of respect for CH/ Tom... :2c:
 

Sloth Tonight

CF Moderator
ECF Veteran
Verified Member
Jun 25, 2014
7,879
51,681
NY
If you're looking for a small Atty you can put dual coils in, the Reactor is highly recommended, my CH modded Reactor is ~22mm high sans DT, ~16mm deck diameter, and has three posts for duals.



Not to start a war... even though I own and enjoy one, I refrain from mentioning other atties on this B-F Atty Modder's Thread out of respect for CH/ Tom... :2c:

Good point bro, no disrespect intended to CH and I'll refrain from here on out. I tend to see a Q and answer it without thinking of where I'm posting at - not the best habit :)
 

AllPepperS

Super Member
ECF Veteran
Verified Member
May 31, 2014
824
2,924
78
Palm City, FL
ok, my mistake, I thought Tom did send in's if they can be Catfished. Like if you have a run here and you missed the run and buy one and send it in to be modded. I have a CLT V1 I have used and Tom told me I could send that in and he would fix it to BF. I have to see how the size works for me when my Reo gets here, might be bigger than I would like on it. I have seen some Reactors someplace in my travels but it would need to be modified. I thought I could send one in since I don't see them here.

Thanks for all suggestions. My idea is to see if I could find anything here that was sort of a smaller profile like the Derringer. No disrespect intended at all and I hope none taken.

Tracy
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
You were right, and you were fine!!
the "please don't" was a post suggesting a non-chowder BF atty...

I've done the same - just the other day someone was asking "what's this GandG" thing in a GG thread, so I answered with a link to it, which got removed (quite politely - not complaining!). By the way, the G&G thing is a goofy TUBE mod with a bottle inside and a squonk button! LOL



ok, my mistake, I thought Tom did send in's if they can be Catfished. Like if you have a run here and you missed the run and buy one and send it in to be modded. I have a CLT V1 I have used and Tom told me I could send that in and he would fix it to BF. I have to see how the size works for me when my Reo gets here, might be bigger than I would like on it. I have seen some Reactors someplace in my travels but it would need to be modified. I thought I could send one in since I don't see them here.

Thanks for all suggestions. My idea is to see if I could find anything here that was sort of a smaller profile like the Derringer. No disrespect intended at all and I hope none taken.

Tracy
 

MFToms59

Ultra Member
ECF Veteran
Verified Member
Mar 19, 2012
1,547
3,842
Nevada
AllPepperS, Tom will mod any atty you have, he did my Atomic as a send-in. Just give him a quick PM to insure is is able to modify the one you're interested in, chances are 99.5% he has or can do it. On Turk's signature line there is a Stock Status and Interest link for Atty lists, on the top left side, click on In Stock https://docs.google.com/spreadsheets/d/tBUia59bGb1G0EAGfxzI3bw/htmlview?pli=1

fairtradesloth, I've done the same in the past, I think most everyone has without thinking... now I always re-read my post before finalizing since written words don't necessarily carry the same intent as when spoken, I appreciate you took my post in the spirit I intended.
 

AllPepperS

Super Member
ECF Veteran
Verified Member
May 31, 2014
824
2,924
78
Palm City, FL
Whew! I don't want to step in it right away :ohmy: I just need to do some more research, I think my Reo is in a snowbank between here and Maine.
Reactor, Hobo, Atomic look interesting and on the smaller side. Cyclone looks to be a bit tall. Flavor for me more than AFC I think. The Derringer, might be the beginning and the end, looking forward to that one.
 

mommabird62

squonkhead
Supporting Member
ECF Veteran
Verified Member
May 11, 2014
7,247
30,462
63
NC
Whew! I don't want to step in it right away :ohmy: I just need to do some more research, I think my Reo is in a snowbank between here and Maine.
Reactor, Hobo, Atomic look interesting and on the smaller side. Cyclone looks to be a bit tall. Flavor for me more than AFC I think. The Derringer, might be the beginning and the end, looking forward to that one.

Allpeppers, I recently got a PDA from CH and it is a little bit shorter than the Cyclone that I got from him but not as short as the Derringer. It is a really nice little atty with good flavor. Most of these attys are smaller in person than they look [emoji6] He may still have some in stock.

Edit: Here is a pic of the PDA. It'a single coil design. Packs the flavor [emoji5]️

a06d77e94dc205ddc67d23a163c6e27e.jpg



Sent from my iPhone using Tapatalk with my paws :)

Mommabird62
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread