The Hornets work and look very nice on the Woody's as does the Divo as well...
( Hornet on the left)
I did not think about that. It would work well with a Woodvil.
Catfish atty mods.
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
- Status
I did not think about that. It would work well with a Woodvil.
Tom, all paid for manta v2 and afterwards email sent confirming. Are the mini haze atty's ready for payment.
You can send me one but I doubt it. I jest fought one of them on the aeoleous. Never again. All sent in aeoleous will become mini aeoleous's. That piece in the middle of the heat sink was what was causing me issues. I'm pretty sure a rep rebuild would be cheaper than one of those would be. Btw the aeoleous with the heat sink on is a $70 conversion. Without is a $25 conversion. I really don't want to do them unless I get rid of the heat sink. If the bottom of your atty gets hot enough to need a heat sink you are doing it wrong. The top maybe but not the bottom.Hi Chowder, I'm constantly swapping my BF attys and starting to think I may wear out my 510 connector on my REO pretty quickly. What do you think about my purchasing the below 510 to 510 connectors? Would you be willing to convert them to be BF compatible. Is it a problem that they have a copper pin? Should it be replaced with SS? What do you think?
Kepler 510 Finned Heat Sink for Atomizers (3-Pack)
$11.60 Kepler 510 Finned Heat Sink for Atomizers (3-Pack) 3-pack - 22mm diameter / aluminum + copper + SS at FastTech - Worldwide Free Shipping
The Haze wasn't ready when the motherlode that I'm currently looking at shipped. They will be on my next order from my regular distributor. I have omertà clones and bambino clones on the order that should be here Monday or Tuesday. I'm ordering the bonsai clones today. I have an invoice I just need to confirm that it's not a pre-order... Homey don't play the pre-order game.... You don't get money until you have some thing to ship me, period...
Btw. I got a chance to build my manta2. If you aren't into blowing clouds or a super loose draw this will be your favorite catfish yet. It's like a 25% bigger cyclone with Afc minus the leaks of the cyclone Afc. I'm not a full on flavor junkie but this one just made my veritas obsolete in my collection. Superx is not getting one of these..... Maybe I should send Muzikhead a pm. This is everything he ever wanted Kiwi, Hildecat, and quite a few others. I bet even Bobc could find a place for one of these. I'm running mine wide open (6 open holes) and its just a hair tight for me. At 2 holes I would imagine it to be pretty close to a cyclone. This ain't no Rogue... I will be keeping these in stock. These will replace the Veritas and the Mephisto. This just be my Nuppin killer. I only have 24 of these but I will get more. These are authentic run worthy IMO, tell me if you agree.
I was very leery of this atty due to its layout, I thought it would have a pot metal centerpost like the anime but not at all. Genuine Chinese stainless and not the crumbly kind.
I was very leery of this atty due to its layout, I thought it would have a pot metal centerpost like the anime but not at all. Genuine Chinese stainless and not the crumbly kind.
Tom, are they available in just SS or is the ring copper, these are $46 too right, if purchased with the REMatty how much to ship both to UK?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It will take me at least a week to ship them as I haven't prefaced the pins this time. I haven't even gotten an invoice and honestly I would love to not do them but I know there are a lot of folks that just can't see the greatness of the REMatty. If I had to pick between the 2. The Derringer would lose... The spinning center post issue will continue, I'm certain of it. The 1.3 derringer will have a peek bushing instead of the archaic delrin insulator but IMO to little too late. 1.2 should have been peek, 1.3 should have been 3 piece. If I was running it that's how it would have been. I have been on Brett's ... about the post issue since December 28th when I received my first batch. If anyone wants off the Derringer list do it ASAP, no hard feelings but don't have me order you one and then you back out at the last minute.. Big pet peeve of mine. If I tell you I will do something for you I will bankrupt Catfish to do it...
Speaking of which I have ordered the materials to build a bottom fed sx350j mod for under $300.. I might even get it under $250 if it works the way I plan. It won't be a custom milled TMod but I think it will be awesome and look a lot more expensive than it is. I'm psyched but that's all I'm going to say about it until I get all the parts and a plan that works.
Are you talking about the Manta2? If so yes they come with all three rings, copper, black, and the stainless.
I haven't checked yet today but at last check I didn't have an invoice for the REMAtty but I would figure on $90 for the rem and $46 for the manta and shipping to the UK is $25 for USPS priority international.
I'm running my marque's wide open and they're my all time favorite so far for air and flavor, however, it would be nice to have something smaller that doesn't leak in the pocket.
Would I be dissapointed in the airflow on this one compared to the Marque? If not I would probably take both the Manta and the REMatty out for a spin.
Ok I'll take a Manta 2 and a REMatty then. I wasn't on the Derringer list but we had spoken in pm on email so not sure if you had me down but if you did please cross me off.
What do I need to do next? Will you hold a Manta 2 back until REMatty's are in stock as only want one shipping cost or do I need to send now.
Just going outfit wifey for food but will look in later or if easier send me a pm.
Thanks
Sent from my iPhone using Tapatalk
How many Manta V2's are available? I saw you ordered 20 and there were 20 on the list.
?
?
Hornet List
These atty's are perfect for older Reos (including VV Grands) and the 14500 mini Reos that Rob will be releasing in 4-5 weeks
When the list reaches 10, CH will place the order. It will take a bit for them to arrive and be worked, so the sooner the first 10 are named, the better the chances of having them in time for the 14500 run. Payment will be due before they are shipped to their homes. The cost will be $50 each. Shipping is $6 for the total order.
1. penguiness
2. penguiness
3. 73neb
4. Izan
These atty's are perfect for older Reos (including VV Grands) and the 14500 mini Reos that Rob will be releasing in 4-5 weeks
When the list reaches 10, CH will place the order. It will take a bit for them to arrive and be worked, so the sooner the first 10 are named, the better the chances of having them in time for the 14500 run. Payment will be due before they are shipped to their homes. The cost will be $50 each. Shipping is $6 for the total order.
1. penguiness
2. penguiness
3. 73neb
4. Izan
Thanks for the feedback all. My 510 is still in good condition (only got my REO about a month and half ago). I'm just being proactive and trying to prevent harm to my favorite device. I guess I'll just do what everyone does and buy a second one. I've lurked on other reo forums at ECF and remember hearing the new 510 is bulletproof but I didn't really believe it... I guess I'll find out.
Thanks again.
Okay, if Chowder is this adamant about it, I want off the Derringer list as well. I PMed TheTurk about it but leaving a message here as well. Also:
HellBoy Round #2
1. TheDigital99 (Black)
2. VeeHa (Black)
3. VeeHa (SS)
4. Plumeguy (Black)
5. LR40K (Black)
6. Mantis4343 (Black)
7. supersport13 (SS)
REMatty list
1. snakedoc
2. penguiness
3. Harleyndn
4. distortoblotto
5. X-Puppy
6. Plumeguy
7. Nautilusfan
8. calpis
9. Kingdal
10. Clark F
11. TheDigital99
12. robbieblood
13. malkuth
14. fairtradesloth
15. inswva
16. Raynman
17. Jeffreyace
18. havok333
19. magnetnerd
20. cd68
21. jhhollier
Jumping on the REMatty bandwagon.
HellBoy Round #2
1. TheDigital99 (Black)
2. VeeHa (Black)
3. VeeHa (SS)
4. Plumeguy (Black)
5. LR40K (Black)
6. Mantis4343 (Black)
7. supersport13 (SS)
REMatty list
1. snakedoc
2. penguiness
3. Harleyndn
4. distortoblotto
5. X-Puppy
6. Plumeguy
7. Nautilusfan
8. calpis
9. Kingdal
10. Clark F
11. TheDigital99
12. robbieblood
13. malkuth
14. fairtradesloth
15. inswva
16. Raynman
17. Jeffreyace
18. havok333
19. magnetnerd
20. cd68
21. jhhollier
Jumping on the REMatty bandwagon.
- Status
