Catfish atty mods.

[Chowderhead1972]

What a weekend! Dibs listers still trickling in. But I have all but one paid order ready to go...
Shipping and Recieving department:
View attachment 379047

I just opened my third box of size 0 mailers this weekend. Every label hand written with love.

 

[muzichead]

You da man, Tom...

 

[Vince159]

payment for SS Odin sent.

 

[Chowderhead1972]

Everything packed and ready for the post office to open tomorrow. The receipt is going to be 8 feet long.

Now that we have buried the USPS what's next. What are you guys dying to have that the world has told you that can't be bottom fed. I will try to look into the Anima this week. Also don't count the Catfish/Vaperfexxion venture out yet.. We still have some ideas to run up the ECF food chain. The issue was the fact that I had posted about it in VPX's forum and VPX posted in mine advertising the same product is a big ECF no no.. To remain in compliance from my understanding there has to be a clear manufacturer and a clear seller, the lines were blurred. In a split scenario like ours is/was only the retailer (Catfish) may advertise the product and only here in my forum. I incorrectly assumed that due to the fact that I pay to have my own space as does VPX I could grant him permission (which I did publicly) and our brainstorming could be public and you guys could have input to the concepts but alas that aspect was perceived as advertising and therefore illegal.

My dream was to build a FUBU Atty (For Us By Us) not an adaptation of a top feeder. We measure our successes differently in this hobby mine is Until my name is on a Chinese clone without my say so I am just some redneck with too many tools and the inability to sleep like a normal human with great friends. As I tell people on a daily basis: Self-awareness is VITAL.

 

[Kentastic]

****Amended. Not airhole, juice feed hole right under the coil/coils. *****

Here's one for Catfish Atty Mods & friends to focus it's super-powers upon. I want a center feed hole* small atomizer that will fit a Woodvil/Standard Grand catch cup that like the Bugs Mark Chalice, but with a smaller price tag. Or a mini-magma if you want dual coils, but I figure that is asking for the impossible, I'd be happy with a single coil with the *juice hole coming up from below the coil like a Chalice.

Super-friend engage!

 

[67Tele]

Thanks again Chowder!

What a weekend! Dibs listers still trickling in. But I have all but one paid order ready to go...
Shipping and Recieving department:
View attachment 379047

I just opened my third box of size 0 mailers this weekend. Every label hand written with love.

 

[xtreme101]

Here's one for Catfish Atty Mods & friends to focus it's super-powers upon. I want a bottom airflow small atomizer that will fit a Woodvil/Standard Grand catch cup that like the Bugs Mark Chalice, but with a smaller price tag. Or a mini-magma if you want dual coils, but I figure that is asking for the impossible, I'd be happy with a single coil with airflow coming up from below the coil like a Chalice.

Super-friend engage!

The MB Chalice has an air hole in top cap same as a Cyclone, Divo.

 

[Kentastic]

The MB Chalice has an air hole in top cap same as a Cyclone, Divo.

You are correct xtreme101.

Then what the hell addy am I thinking of?? Gettin' old...... and now that I think it through that would not work because the bottom air exhaust would interfere with the feed/drain hole unless it was setup like the Magma.

Everyone ignore the old guy muttering to himself.....

Oh wait I was thinking of the feed hole being right underneath the coil like the Chalice. Sigh... Ok so let me amend that request. I want a small atomizer with a feed/drain hole right in the middle like the Chalice. Anyone know of anymore like this that is affordable. I refuse to pay $200 for one atomizer.

Ken

 

[Aal_]

Ken I got confused the same. When you mentioned chalice I thought yes it has a hole under the coil. Lol.

 

[Kataphraktos]

You are correct xtreme101.

Then what the hell addy am I thinking of?? Gettin' old...... and now that I think it through that would not work because the bottom air exhaust would interfere with the feed/drain hole unless it was setup like the Magma.

Everyone ignore the old guy muttering to himself.....

Oh wait I was thinking of the feed hole being right underneath the coil like the Chalice. Sigh... Ok so let me amend that request. I want a small atomizer with a feed/drain hole right in the middle like the Chalice. Anyone know of anymore like this that is affordable. I refuse to pay $200 for one atomizer.

Ken

I have used the by Leo Dripper Spiral on a Reo, perfect fit and works as long as you remove the o-ring from the well. Do not get the Dripper Pro, it is too wide for a Reo.

However, these do use the little ceramic cups and need R/NR zapping, so not sure if you would want to revert back to the old days after the 3-minute clean/coil/wick/vape turnaround time of an Odin or similar atty.

(I have a Spiral sitting around somewhere, if you want to try it, but I'm using Odins and Origens myself these days, FWIW).

 

[HappiVappi]

You are correct xtreme101.

Then what the hell addy am I thinking of?? Gettin' old...... and now that I think it through that would not work because the bottom air exhaust would interfere with the feed/drain hole unless it was setup like the Magma.

Everyone ignore the old guy muttering to himself.....

Oh wait I was thinking of the feed hole being right underneath the coil like the Chalice. Sigh... Ok so let me amend that request. I want a small atomizer with a feed/drain hole right in the middle like the Chalice. Anyone know of anymore like this that is affordable. I refuse to pay $200 for one atomizer.

Ken

How about the A7. I have one. Drilled a hole into the top cap. Works great and costs less than 20 bucks.

Cheers


Sent from my Transformer TF101 using Tapatalk

 

[Kentastic]

I have used the by Leo Dripper Spiral on a Reo, perfect fit and works as long as you remove the o-ring from the well. Do not get the Dripper Pro, it is too wide for a Reo.

However, these do use the little ceramic cups and need R/NR zapping, so not sure if you would want to revert back to the old days after the 3-minute clean/coil/wick/vape turnaround time of an Odin or similar atty.

(I have a Spiral sitting around somewhere, if you want to try it, but I'm using Odins and Origens myself these days, FWIW).

No no... thank you for the offer, but NO.... I am not resorting to R/NR coil building..... I came in right after that started to go out of style and I was so glad when I read up on how it works. No wonder everyone used to worry about shorts all the time. I was just thinking the other day that I hardly ever have any kind of short unless it's a screwed up cheap-aas clone that causes some metal piece to touch were it ain't supposed ta touch. when you start talking about old school res/no-res coils and one slip or you tighten one thing down a little too tight and it shorts out.... I just shake my head. There was all kinds of iffy things going on back then that could cause shorts, so I totally understand when people that have been around awhile always worry about how well a mod handles shorts and kind of freak out when there is not a lot of safety features dealing with that.

Now days it's just people trying to vent batteries and start things on fire that is just a wee bit dangerous. What do you mean I can't vape this .043 ohm Mastodon octe-parallel coil that I made using a coat hanger wire wrapped around the handle of my pipe wrench? I had to spot weld the leads to the positive and negative posts, but I getz massive clowds! I just have to press the fire button while holding it with a ice-pack, but I totally showed all the 17 year olds that I hang out with how awesome I am. I even got a few of them going out to buy the exact same setup as I'm using. It's so cool.....

 

[Kentastic]

Besides, the RM2 is still the easiest and most bulletproof atomizer I've ever used. If the feed hole was right in the middle it would be about perfect for single coils.


Ken

 

[Chowderhead1972]

Research "Anima bottom feed". Juice comes up in the center and the posts are offset like the rm2 but much cleaner. The anima won't fit on a classic Reo however. Get the Reo milled! I have two demo sample attys from the Phillipines that I was going to whip out when Bobc started dragging me over the coals about Not supporting Team 14mm. I know you hear me Brooklyn Bob..... I was sent a Hornet BF and a projectile mods that is the same size but with a very different cap. Both the hornet and the Projectile make the divo look huge. These are only available in bottom fed and have crazy high juice holes. The Hornet looks like a Divo clone but more expensive.

View attachment 379125

Projectile left, Divo center, Hornet right

 

[BobC]

We don't need no stinkin REOs

 

[Chowderhead1972]

Is there a light that comes on when your name is mentioned? Look up^^^^

Did Rubbermaid get into the Bottom feeder game?

Oh snap!

 

[67Tele]

Apologies for being clueless but, What's that thang?

We don't need no stinkin REOs View attachment 379122

 

[Chowderhead1972]

I think that was part of Gdeal's printer mods that had a group buy two weeks ago cool design. Not crazy about the splatter paint. Pfaltsgraff?

 

[BobC]

Is there a light that comes on when your name is mentioned? Look up^^^^

Did Rubbermaid get into the Bottom feeder game?

Oh snap!

LoL, those are the tiniest BF devices in the game today, GDeal's wonderful magic 3D printed devices
On the left is a DNA30 Squonker, on the right is the Peko machanical

 

[BobC]

Research "Anima bottom feed". Juice comes up in the center and the posts are offset like the rm2 but much cleaner. The anima won't fit on a classic Reo however. Get the Reo milled! I have two demo sample attys from the Phillipines that I was going to whip out when Bobc started dragging me over the coals about Not supporting Team 14mm. I know you hear me Brooklyn Bob..... I was sent a Hornet BF and a projectile mods that is the same size but with a very different cap. Both the hornet and the Projectile make the divo look huge. These are only available in bottom fed and have crazy high juice holes. The Hornet looks like a Divo clone but more expensive.

View attachment 379125

Projectile left, Divo center, Hornet right

Me Likey Why the high Juice holes though?